On the site next to country house or dacha, families with small children often equip a place for active games. Depending on your financial capabilities, desires and area of the plot, you can choose one or another option. This could be a whole playground, a sandbox, a swing or a slide. Many designs can be purchased at finished form, or you can assemble it yourself. You will learn how to make a children's slide with your own hands from the article.
Construction rules
Before you figure out how to make a slide for children with your own hands, you should study the rules for its construction and installation. You need to remember the following:
The slide must be stable, functional, durable and attractive appearance. Its base can be concreted or use metal supports. All structural elements should be sanded and varnished.
Be sure to take into account the age of the child; if we are talking about preschoolers or primary schoolchildren, then the height of the slide should be a maximum of 3.5 m.
Types of children's slides
You need to choose the sizes and materials for a homemade slide depending on where exactly it will be installed. For example, if you need to make it not for the street, but for the room, then it should be small, and for production they use materials such as:
- laminate;
- plywood;
- wood and more.
The principle of their manufacture does not differ from the work on the construction of street slides, but we are talking about much smaller dimensions.
And if we are talking about making an option for the street, then you should decide on the material, since working with each of them may differ. And the properties of this or that material also differ; they have their pros and cons. Their characteristics are:
Using the last option as an example, you will learn how to build a slide with your own hands for the street. After all, wooden slides are most often installed in dachas.
DIY wooden slide
Since wood is the most available material, then for construction with their own hands they use it. In addition, a wooden structure is easier to repair and easiest to install. Unlike metal structures, you do not need to use a welding machine or other complex equipment.
Works on construction of a wooden slide start with preparatory activities. How successful the result will be depends on how correctly you perform them. At this stage you will need to do the following:
- remove the slide at the installation site fertile soil, and level the ground;
- fill the area with sand and let it settle, compact the soil;
- prepare wooden blanks (for example, boards for feet, timber for the base, railings or stringers and more), dry them, saw them according to the drawing and sand them well. Then saturate them with the protective mixture;
- paint the steps, handrails and boards for the “tunnel” in two layers of enamel, taking into account intermediate sanding;
- prepare the side elements for lining the tunnel and side and treat everything with impregnation.
When the preparation is completed, you can create the basis for the future structure and perform subsequent actions. The algorithm is like this:
Naturally, there are different manufacturing options. It all depends on what kind of design it will be. Perhaps it will consist of two slides different sizes and additional elements. It will be more difficult to do this on your own.
Materials for the ramp
Even the slope itself can be made based on various materials. In addition to plywood, the following may be suitable for it:
- sheet of plastic (has the most best characteristics slip-resistant, but may crack);
- galvanized sheet 0.5 mm thick;
- linoleum.
In addition, the wood can be polished with wax. Some people line the slope with laminate, but this is not recommended, since laminate tends to deform under load or moisture.
Ensuring safety and durability
During construction, it is necessary to follow a number of rules so that the structure lasts as long as possible, and parents do not worry about the safety of the child.
In particular, secure each structural element as securely as possible. It is not recommended to cover a finished wooden slide with simple oil paint. Better to use acrylic coating or high quality varnish. At least this applies to the slope as the most used part of the product. The decorative coating must be applied in several layers, each one must be dried before applying the next one.
The covering of the ramp will wear off over time, so it needs to be properly cared for. Each time before painting, the surface should be sanded, all deformations on the boards should be eliminated, and cracks should be filled. And only after these steps the surface is covered with paint.
To ensure your child's safety while playing, remember the following:
- Periodically, the wooden slide needs to be inspected to see if there are any deformations or cracked joints on the surface. This is especially important after winter;
- It is better to install the slide in the shade, preferably so that it is clearly visible from the window;
- there should be no plants near the installation site, causing allergies, poisonous or thorny plants. And honey-bearing flowers can attract bees, which can be dangerous for children;
- No pipes, electrical cables or hoses should be placed near the slide.
If the slide will be made for general use, then there should be enough space around it for several children to be there at the same time.
When constructing a slide, you need to carefully plan everything and take into account all the risks. Regardless of what material is used, you need to carefully study its properties.
Now you know how to make a slide with your own hands in the country or near a country house. You just need to select the right materials for the job and follow certain parameters. Over time, you will be able to add swings, equipment, a carousel and other devices to the slide.
Setting up a playground is impossible without a slide. But you need to choose the design very carefully and take into account all the nuances. This means safety, comfort, and ease of making it yourself.
Kinds
Speaking about the types of children's slides, we must first distinguish two types: garden and located in the house. Most often, home structures are placed in the bedroom. They can be made from randomly selected materials, even plywood or particle boards. This is unacceptable on the street - the adverse meteorological influences there are too strong. But the basic approaches to design remain unchanged.
The difference may be due to the materials used to make the slide. For it they use:
- tree;
- metal.
- ease of assembly;
- minimum occupied territory;
- possibility of obtaining various forms;
- convenience and safety;
- seasonal versatility.
Plastic allows you to make slopes in the form of a spiral, pipe or wave. The excellent heat capacity of the plastic slope allows it not to overheat in the summer, and also maintain a comfortable temperature in the winter. The work is very simple, you just need to assemble the parts in accordance with the instructions. However, plastic is fragile, especially if we talk about cheap Chinese samples. It doesn't last long enough.
Often on site nearby apartment buildings you can see metal slides. They are very durable and serve long time. Even with active use, the attraction will work enough for several generations to use it. You can make a structure with different heights and with unequal lengths of descent.
However, before choosing such a structure for your yard, you need to take into account its weaknesses.
Metal conducts heat too well. In hot weather, it gets very hot, and when cold weather sets in, the skaters easily freeze. This can lead to bad health consequences, even if they are not noticed in the heat of the game. You also need to remember that metal requires maintenance. And if the ramp is made of steel, it may corrode.
Wood is attractive for many reasons. It is safe in environmental and sanitary terms. Wooden structures are relatively lightweight and can be placed in any location. Weather conditions do not prevent their use. But we must understand that even the most best wood may become deformed due to dampness and temperature changes.
Special treatment is carried out for protection. However, it complicates and increases the cost of the construction process. In addition, it is necessary to carefully select impregnation compositions, since not all of them are safe enough. But a wooden slide can be easily repaired with your own hands. And during the construction stage you will not need to use a welding machine.
The large area occupied by the slide (especially together with the descent) requires a more thoughtful approach to organizing this element of the playground. Limit your choice suitable material it is forbidden. Often the slide is complemented by a house. Not only does it provide another place to play, but it also provides shelter from the rain during the summer months. It is also worth mentioning that the types of slides differ both in the presence of the house and in the size of the structure.
Drawings and dimensions
In order to properly build a slide for children on a summer cottage, it is necessary to draw up drawings and diagrams. If the slope profile found on the Internet does not suit you, you need to turn it clockwise (to increase) or counterclockwise (to decrease) the angle. The steeper the slope, the more enjoyable it will be for children. In addition, such a design will take up less space, which is especially important in the country.
But when the slope of the slide is tilted by more than 40 degrees, careful calculations must be made so that the braking section does not turn out to be excessively long.
Typically profiles are drawn to the same scale, from bottom to top. At the same time, they try to ensure that the distances between the starting points coincide. After this, vertical secant lines are prepared, between which there should also be an identical distance. The angle of the slope is determined by how large the free space is.
If there is a wall, a pool or other dangerous places in the courtyard of the house near the slide, you need to plan to build the steepest possible slide.
When drawing up drawings, it is necessary to take into account not only the accessible territory, but also the age of the children. So, if the design is designed for a category of 3-7 years, you can make a playing surface at a height of over 2 m. But in this case you will have to make barriers from metal, the height of which will be at least 0.7 m. If children of any age can use the slide, the openings of the fences can be a maximum of 0.5 m. In this case, the height of free fall should be limited to 2 m.
When a fall from the upper platform is likely, it is necessary to provide for the laying out of an impact-absorbing coating during the design. They are often not indicated in the drawings support structures. And also there may be no other deepening elements. The form should be as simple as possible, since it is difficult to build a structure with a sophisticated configuration. The drawing of a slide for the street should be made in such an orientation that the descent is not directed towards the roadway.
Design
At an early age, children's imagination does most of the work. It is able to “colorize” a seemingly unremarkable element on the site, presenting it as a fairy-tale space. But it is quite appropriate for some adults to want to help the imagination, to push it in a strictly defined direction. And if it is difficult to diversify the slope, then the ascent can be presented much more interestingly than a simple staircase. Excellent solutions this kind can be:
- slide in the form of a “tractor”;
- a house on a tree;
- "locomotive".
How to do it yourself?
On the Internet you can easily find many schemes for arranging a children's slide. But you should seriously pay attention only to such drawings and drawings, which show the barriers in detail. Children of any age play with abandon and lose their sense of reality. Therefore, both fences and railings must be present. Special attention should be paid to the materials from which the slide as a whole and even its minor parts are constructed.
There are two main requirements: sanitary safety and minimal risk of fire. All wooden and metal constructions must be sanded to minimize the risk of injury. When thinking through a future structure and constructing it, you need to exclude any slotted partitions and gaps. When playing, children do not watch where they put their fingers or even their heads. It is useful to imagine the slide through the eyes of a child, and then it will become clear where dangers may be hiding.
Step-by-step design sports equipment begins with preparing the descent. It is made from boards that match in length and width. The wood is carefully sanded to ensure a safe descent. To connect the boards, bars are used, placed from below. The next step is to attach the side parts of the structure to the descent.
In order not to carefully calculate all the proportions, you can simply repeat standard sizes factory slides. It is 1.3 m in height at an inclination of 55 degrees. The boards of the side parts are selected and placed so that the ends are at the top of the site. They function as handrails that you can hold on to before descending. The sides are secured on both sides with self-tapping screws so that they hold onto the base of the descent.
Important: the side parts should be thoroughly processed. All sharp corners are cut off and even sanded with sandpaper. To spend less time and effort, you can simply take a grinder with a grinding disc. Next you need to do the marking. At this point you will need a garden auger.
Recesses in the ground obtained with its help are needed for installing timber. Note: the bottom of this beam should be lubricated with mastic. Now the places where it was placed are being concreted. Only such a solution ensures the reliability and stability of the structure. It is recommended to mix the mortar using M500 cement in standard proportions.
Grooves are cut in the upper part of the beams with a saw. They are needed to install the trim strips. The parts are connected using self-tapping screws. The slats solve two problems at once: they increase rigidity and ensure the safety of children. Now you need to attach a couple of wooden crossbars to the frame.
A ladder is attached to them on one side and a prepared descent on the other. When this work is completed, it is necessary to build a wooden floor. When making it, boards are laid, attaching them with self-tapping screws.
Important: boards cannot be placed closely. The gaps should be such that there is no risk of injury, but water can drain freely.
If maximum strength is needed, the joints of wooden parts are reinforced with steel corners. It is recommended to make the slide twice as long as it is tall. When choosing a site, you need to make sure that it does not end up in a lowland. When it rains for a long time, a “swamp” will form there. All wooden and plastic parts must be impregnated with fire retardants.
But the construction of a wooden slide can happen differently. An alternative scheme involves first removing all the soil and leveling the excavation. This is necessary if there is fertile land there - then it will not be empty and will be useful somewhere else. Next, the site is covered with sand and after a while, when it settles, the entire area is compacted. This time should not be wasted, you can:
- prepare wood;
- dry it;
- cut according to the drawing;
- sand;
- impregnate with protective components.
The steps, handrails, railings and boards that will be needed to build the “tunnel” are painted twice with enamel. They need to be sanded between paintings. On this preparatory stage ends. The time has come to build a foundation: in holes prepared using garden borer, install fittings. It will certainly be verified according to the building level.
When the reinforcement is placed, it is immediately concreted, and the corners are welded on top. The pillars that will be placed at the base must be sawed in certain places. These recesses will allow you to fix the timber at the corners with self-tapping screws. Next, the pillars are connected to each other using jibs. The staircase is made like this: stringers are attached, and then steps are placed on top of them.
But the ladder cannot be used normally if it is not supplemented with a launching pad. When this work is completed, it is necessary to prepare the base of the descent (it is made of timber). A steel curved profile for the slope is installed. A plywood shield is placed on top of the base under the slope. A sheet of iron is nailed onto this shield.
The outer edges of the sheet are folded and secured to the profile. Otherwise, injuries are inevitable. Now you can cut gaps in the boards and wrap the edges of the sheet there. A boardwalk is being prepared under the ramp. The sides are covered with plywood. Now you can:
- put up the sides;
- complement the stairs with railings;
- build hipped roof, cover it on top with plywood.
- sheet of plastic;
- linoleum;
- galvanized steel 0.05 cm thick.
It is not advisable to use laminate for slopes. Under constant load or simply upon contact with water it is easily deformed. And here are some more recommendations:
- You can increase the protection of wood from moisture by polishing it with wax;
- for coating a wooden slide, oil paint is much worse than acrylic compounds and varnish;
- you can’t place a slide near poisonous plants and honey plants;
- you must immediately ensure that there are no pipes or electrical appliances nearby;
- You cannot orient the slope towards the roadway, fence or main wall.
Beautiful examples
It would take a long time to list the rules for building slides and study the nuances. But it is much better to take the initiative and focus on ready-made design ideas. The photo below shows a simple light-colored slide built almost entirely from wood. Only the surface of the slope is lined with sheet iron. At the same time, the protective sides are completely wooden. Contrary to the fears of some people, this decision does not look sad at all.
In the courtyard of a private house or in a country house, the best entertainment for a child is a children's slide. The playground with a slide is suitable for children from 2 to 7 years old and older. Implementing such a design is not difficult, knowing how to make a children's slide with your own hands, how to ensure safety and what to pay attention to during manufacture. The simplest, fastest and most inexpensive option for a summer cottage is a wooden slide, the construction of which will be discussed in this article in the form of step-by-step instructions for beginners without construction experience.
DIY children's slide
Types of children's slides
The location of the slide (in the house or on the street) will determine its dimensions and material of manufacture. From this position, two types are distinguished:
Indoor slide for a child in a house/apartment
As a rule, it is small in size and installed in a child’s bedroom. Any materials (chipboard, plywood, laminate) are suitable for production, since the negative impact is eliminated environment. A do-it-yourself indoor slide for children is made according to the same principle as an outdoor one, but in a more compact size.
There are such slides in the courtyard of almost every high-rise building. Residents of the private sector have to take care of their installation themselves.
Types of slides depending on the material of manufacture
There are ready-made slides on sale made from different materials (the most popular is plastic), for self-made usually wood or metal is used. Nevertheless, short review will give an idea of the advantages of this or that material for the slide. The list is in order of ease of installation and duration of operation:
Inflatable slide
Made from PVC (laminated PVC fabric). Suitable for little ones.
Easy to assemble (inflated manually or with an electric pump), compact, has short term services.
Plastic slide
Designed for children 3-5 years old. Plastic allows you to make slopes of various shapes: pipe, spiral, wave.
A PVC slide takes up little space, is easy to clean, safe, and has a sliding surface. You can go down the slide at any time of the year; the plastic slope has a high heat capacity (it does not overheat in summer and does not cool in winter). Making a plastic slide with your own hands is quite simple - connect the parts according to the instructions.
The main disadvantage is the fragility of the plastic (inherent in cheap Chinese-made models).
Metal slide
Reliable, durable, with proper care it can be ridden by two or three generations. It is possible to make the slope (descent) of different heights and different lengths.
The disadvantage is the high thermal conductivity of the metal (it’s very cold to go down in winter, and very hot in summer). In addition, the metal slide needs maintenance, and the steel slope is susceptible to corrosion.
Wooden slide
Wood is a natural and affordable material.
The wooden slide is environmentally friendly, lightweight, comfortable, suitable for installation in any place and use in any weather.
However, wooden slides require constant protection (wood is susceptible to rotting and deformation).
A wooden children's slide for a dacha is the most popular and simplest option for making your own, due to the availability of wood, maintainability and the ability to complete the work without the involvement of specialists (welding work, use welding machine and so on.).
How to make a children's slide out of wood with your own hands
1. Design
3D projects, drawings, slide diagrams allow you to get a holistic idea of the configuration and dimensions of the future structure, and will also significantly facilitate the manufacture of parts.
Development of a slide project for children (what to pay attention to):
- child's age. The baby will need a flat, low slide. So that he himself or with the help of adults can go down it. Older children will be more interested in the presence of turns or bends on the descent;
- height. Allows you to select the required height of the stairs (the taller the child, the greater the distance between the steps should be) and the steepness of the flight. In addition, determine the installation location of the handrails;
Note. For small children, it is imperative to install a flat staircase; for older ones, a vertical one is acceptable.
- slide dimensions. Dimensions are needed to calculate the width of the slope (descent) and the height of the enclosing sides;
- installation location. It is necessary to leave free space in front of the slide for a safe descent;
- the angle of inclination of the stairs and slope so that they are safe for ascent and descent;
- the wishes of the child and your own abilities.
A drawing of a simple wooden slide is shown in the figure.
2. Material for children's slide made of wood
As an example, we provide a list of lumber for a wooden slide with a slope length of 3000 mm and an upper platform size of 500x500 mm.
Material prepared for the website www.site
| No. | Material | Purpose | Quantity |
| 1 | wooden beam 100*100*1500 mm. | For supports | 4 things. |
| 2 | wooden beam 20*40*500 mm. | To strengthen the upper platform (stiffening ribs) | 2 pcs. |
| 3 | wooden beam 30*30*500 mm. | For fencing the upper platform | 2 pcs. |
| 4 | wooden beam 30*30*1500 mm. | For railings | 2 pcs. if necessary |
| 5 | board 20*100*500 | For connecting supports from below (giving structural strength) | 4 things. |
| 6 | board 25*100*500 | To cover the floor of the upper platform | 5 pieces. |
| 7 | board 25*100*300 | For arranging steps | 6-8 pcs. (depending on the child's height) |
| 8 | floorboard, 3,000 mm or moisture-resistant plywood, at least 20 mm thick. or factory plastic slope | For the ramp device | 2 pcs. The number of pieces and their length depends on the specified length of the slope and its width |
| 9 | board 25*100*3 000 | For installation of ramp guards (+ stiffener) | 2 pcs. |
| 10 | screws, anchors | For fastening | Use galvanized hardware to avoid corrosion. It is better not to use nails |
| 11 | lumber for arranging stairs: board or timber | For stringer/stringer of stairs | 2 pcs. |
Advice. Under the upper platform you can make a box for storing sports equipment or toys.
The tools you will need are a tape measure, a hammer, a level, a drill, a plane, a saw.
3. Preparing material for a children's slide
Please note that only well-dried wood is used in this work; this will reduce the likelihood of deformations. All lumber must be processed (planed) with an electric planer to eliminate nicks and knots. And also sand and chamfer (round) to eliminate all possible wood defects.
Treat the bottom of the support pillars with any material that will prevent rotting (waterproofing mastic, waste machine oil, resin, etc.).
4. Preparing a place under the slide for children
Level the area allocated for the hill and mark the location of the supports. In our case, this is a square of 500x500 mm. In the corners of the square, use a drill to deepen holes of 500-600 mm. Pour crushed stone-sand mixture down. The pillow will serve as additional protection for the support posts.
Note. If you plan to develop a complex playground, more free space should be provided.
5. Installation of supports for a children's slide
Supports are installed in the prepared places (No. 1 from the table with the list of materials) and securely fixed with concrete.
To make the structure stronger, its bottom is “tied”. To do this, grooves are made in the racks (with a chisel or a router) 20 mm deep. The supports are connected to each other using a planed board (No. 5), inserted into the prepared grooves. It is better to fasten with self-tapping screws or self-tapping screws.
Note. Installation of the slide is possible without digging in; in this case, guy ropes are provided.
6. Installation of the floor (top flooring) for a children's slide
The work uses elements No. 2 and No. 6. The timber is laid out parallel to each other, and boards prepared for the floor are attached to it.
Advice. A gap of 5-7 mm should be left between the boards to allow water to drain.
7. Making a ramp (slide) for a children's slide
If there is a plastic slope, it is simply installed and secured to the existing structure. When making a ramp with your own hands, elements No. 8 and No. 9 are used. The floorboards are fastened together, and enclosing sides are installed along them.
The place where the ramp is attached to the floor of the upper platform can be made in two versions:
- by forming the desired angle (usually 45°) and attaching to the base;
- by sawing the grooves, as shown in the photo.
Please note that the bottom of the slope is also sawn at an angle to ensure its stability when going down the hill.
The main rule here is that the boards that make up the slope are carefully polished after the shield is formed - this will eliminate the smallest imperfections of the boards and prevent the appearance of splinters and abrasions in the child.
After construction, the slope is painted.
What to make a ramp for a children's slide?
Summarizing the user experience, we can highlight the most popular materials for the release device:
- plastic sheet. It has better sliding characteristics, but is prone to cracking, and also makes the structure expensive;
- galvanized steel sheet with a thickness of at least 0.5 mm;
- thin plywood;
- linoleum;
- wax polish applied to wood;
- Laminate, on the contrary, is not recommended to lay, because it deforms under load and exposure to moisture.
When laid on top of a durable wooden deck, these materials make the slide for a children's slide more slippery, which means the descent will be faster.
A drawing of a children's slide slope is shown in the diagram. An older child will be interested in a slide that has a spiral slope rather than a straight one. In this case, you need to take a more careful approach to the design of the gutter, and its additional coating is mandatory.
Advice. Any unevenness of the slope, sharp corners, or metal parts can cause injury, so the places where the screws are attached are sanded, and the slope is painted or varnished.
8. Making a ladder for a children's slide
A mandatory element of a children's wooden slide is a staircase consisting of at least several steps.
Structurally, the staircase can be made on a bowstring or on a stringer. An example is shown in the diagram.
Note. Round steps can be made from available materials, for example, from cuttings of garden tools (shovels).
9. Fencing the stairs and the floor above the landing
Guardrails for the stairs and upper landing depend on the height of the slide, the age of the child and other factors.
Despite its apparent simplicity, a wooden children's slide requires compliance with certain rules during construction:
- flexible plywood can be used to make a rotary ramp;
- each element of the ladder must be securely fastened;
- It is advisable to paint the finished wooden slide not with ordinary oil paint, but with acrylic paint, or even better with high-quality varnish. In any case, the most exploited surface is the slope. The decorative coating is applied in several layers with mandatory drying of each layer;
- Over time, the coating on the ramp will wear off and will therefore require maintenance. Users advise that each time before painting, sand the surface, eliminate possible deformations of the board, fill the cracks with putty, and only then cover with a new layer of paint.
Safety when using children's slides
- the slope should rest against the mat (or sand mound) - this will ensure a soft landing;
- A wooden slide needs periodic inspection for cracked joints or deformed boards. Especially relevant after winter;
- It is better to install a wooden slide in the shade, in a place that is clearly visible from the window;
- There should be no thorny bushes, poisonous plants (datura, foxglove) or allergenic plants near the installation site. Honey-bearing flowers are also not the best neighbors - they will attract bees;
- there should be enough space for several children to be near the slide;
- Electrical cables, pipes, and hoses should also be located away from the slide.
Conclusion
A short guide will help you make a wooden slide with your own hands. In the future, it can be supplemented with other elements of the play complex: swings, sandbox, sports equipment.
On warm sunny days, I often feel the desire to get out into nature, to the countryside. The main feature of a private house is that there is always something to do on the site - planting a vegetable garden, planting flowers, minor repairs, relaxing in the gazebo. But often our harmony and peace are interrupted by children, because they cannot find anything to do. Children need to play and move all the time. To do this, it is worth building children's slides for the dacha.
A slide with a house provides safety, perfectly captivates the child, takes up time, and interests children more than anything else. And you, in turn, will take care of the housework without worrying about the children.
The prices for slides for children's playgrounds are very high, and not everyone can afford such a gift for a child alone. But for skillful parents there are simple and inexpensive ways to implement this idea.
Playhouse with slide
To build a house with a slide, first of all, you should decide what the height of the children's slide will be, taking into account the age of the child, your preferences and the possibilities of implementing the project.
For the slide, the house is built two-story, or installed on support beams. You will need to spend a little more material than for a simple small house for children.
First of all, it is necessary to clarify the location for construction, not only where the structure will stand, but also what the site will be where the child will land. Knowing how children act out, use larger plot, so that your child does not accidentally get injured during the game.
Having decided on the location for the structure, we move on to the drawing of the house, taking into account your wishes, the characteristics of the area and the desires of your child. As an option, you can take a simple children's slide house. For examples of finished structures, look at the photo of a children's slide.
Slide installation
Install the beams, they will serve as legs for the entire structure. These pillars run the entire height of the children's slide from the ground to the beginning of the roof. Such a reinforced children's slide has a long service life; if you use cement mortar to dig into the ground, the tree will rot less and last longer.
The floor is laid on beams to a certain height; you can use chipboard with cut grooves for the beams or assemble a more durable frame from boards.
Then make the sides or walls for the house, also knocking them out of boards and covering them with plywood for greater safety.
All that remains is to assemble the skeleton for the roof; it can be gable or flat, according to your preference. For the roof you can use any coating at your discretion
We install a plastic slide in the prepared place and secure it.
Children's playhouse with slide and rope ladder
Create a children's house with your own hands, you can come up with whatever you want. It could be a ladder, a rope, a slide and even a bed, or just your child’s secret room, his own house.
Consider the option with a rope ladder. For this design, you will have to mount a house, taking into account the location of the slide and rope ladder.
Construction begins with the basics, that is, with the chosen location and a clear vision of the building. We install the beams by digging them into the ground; they must be at a certain height for the house and taking into account the platform next to it (where the floor of the house is its platform).
After assembling the main skeleton of the structure, the floor is knocked down, everything is covered with boards and plywood as desired. A frame of walls is built on the basis of the floor. Then it is covered with plywood or boards with cut out windows.
After building a small room in the house, you need to install a simple staircase to make it easier for children to climb upstairs. On the other side, install a rope ladder at an angle. Then you can add a slide to the house.
For a rope ladder you will need four strong beams. It is important to make a square out of the beams, leaving a little space at the ends so that the rope does not start immediately. Drill holes along the width of the boards into which the rope will be inserted and tied into a knot.
Tie the ladder itself like a net, but not too stretched and loose. It is important to clean the tree so that the child does not catch a splinter. Use for this grinding machine. Then paint the outdoor children's slide with varnish for beauty and safety.
Photo of a children's slide with your own hands
Children carry a powerful charge of energy, so a playground is an indispensable attribute of any summer cottage, where there are children.
Absolutely any number of entertainment items can be installed on the site. It all depends on the financial capabilities and wishes of the owners.
You can also please your children by doing some fun with your own hands. As an example, a children's slide. Absolutely simple to construct, and will delight you for many years if you take the process seriously.
The process of creating a slide and the final result will serve as an additional source of joy with minimal costs. A children's slide at the dacha will be the best entertainment for children.
Wooden slide
Such a building can even be placed inside the house, if the size of your area allows it. When building a slide, it is important to remember that you need to use environmentally friendly raw materials, since the child will be in direct contact with it. A children's slide made of wood is best suited for such entertainment.
But if you decide to build from other materials, then make sure that there are no harmful components.
This also applies to the bright colors that are usually used to decorate the slide.
It is important to monitor such inserts both for the content of harmful substances and for resistance to fire.
Install strong railings regardless of your child's age. In any case, this will protect you from unwanted injuries and falls. The railing will also act as a support for the child’s balance.
Wooden slide safety
A children's wooden slide should first of all be a safe object for play. It will fit perfectly into any exterior and interior of the house thanks to its calm style. It will not be the first to catch your eye, but will only emphasize the previously created style.
In the summer, in the sun, a wooden slide heats up slowly, without burning the child on contact, like, for example, slides made of metal. This is a big plus when children often play outside.
Such a slide can be installed anywhere on the site, and not just where there is always shade and coolness. The child will get burned on the metal, and the wood will only become warm in direct sunlight.
Even if a plastic outdoor slide is more convenient, its weak frame will not serve you for long. It will crack, and the child may get injured from riding such a slide.
Location of the slide on the site
The slide must be located away from extraneous buildings and trees. This precaution will not be superfluous, because it will make your baby’s games more comfortable.
You can also dot the perimeter around the slide with grass or cover it with a special artificial turf. The descent from the slide will be softer in the future and the child has a minimum chance of falling.
The base is best secured or concreted. Even if the child cannot move the structure with his own hands, then from frequent rolling it may itself tip over.
The height of the structure should depend on the age of the child. It is advisable not to exceed more than 2 times the height of the person who will use it. There should be no cracks, openings or holes in the structure.
Take this seriously, as children, while actively moving, do not notice small obstacles. The child may get caught or stuck.
DIY slide
If you are interested in the question of how to make a high-quality children's slide with your own hands, then you need to follow all these tips. Then the child, while riding down the slide, will be completely safe and will remain without unwanted injuries.
Note!
If we are talking about a wooden structure, then you can develop drawings for a children's slide yourself. Choose the color, texture and even shape according at will or use it already ready photo children's slide to complete the picture.
The materials you will need are nails, boards, slats and wooden beams. Also make sure you have a hammer, saw and plane. These are the most basic tools for the job.
You can simplify your construction using a hand or electric drill. When assembling the structure, carefully check that there are no nails sticking out anywhere.
The stingray may be from plastic material. After all, over time, a wooden slope can develop clues if it is not treated with anything.
But with a metal slide everything is much more difficult. Here you will already need a machine for welding metal. If you decide to make the slope metal, then paint it with a special paint that will not allow it to heat up quickly.
Note!
Photo of a children's slide with your own hands
Note!
