The uniqueness of paper crafts is that to make them you need safe materials available to any family. Possession of such art is possible small child. You can attract a boy to needlework by creating paper toys only by getting him interested in this activity. Offer the little man options on how to make and print a car, car, truck and KAMAZ from paper using a gluing template.
The uniqueness of paper crafts is that they require safe materials available to any family.
How to fold or assemble a police car from paper using origami: a simple diagram and drawings
The craft can be made both for play and an original gift to a good friend - an adult. Since men are always boys at heart, an origami machine made from a banknote is a suitable gift.
You will need:
- Rectangular sheets of colored paper;
- scissors, glue.
How to make a toy car:
- Fold a sheet of paper of the selected color horizontally. This is the central bend of the future product.
- Bend the two halves of the sheet on the left and right sides inward, parallel to the bending lines.
- Bend the bends back inward. Then turn the ends of the sheet out from the inside out.
- The folded curves of the inner corners form the body of a makeshift paper machine.
- Make triangle folds under the wheels. To achieve maximum resemblance to a wheel, bend the corner vertices inward.
- For headlights, also bend the right corners of the car internally. On the left side we make the same bends, but smaller in size and outward.
To make your car more colorful, stick paper triangles of a different color on the headlights.
How to make a paper car in 3 minutes (video)
Gallery: paper car (25 photos)
How to make a car that drives out of paper
You can make a moving racing car out of paper. To start the movement, place such a craft on a smooth surface and blow on it. Under the influence of the air flow, the figure begins to slide across the surface, imitating the movement of a real racing car.
Necessary:
- A sheet of white paper with a side ratio of 1:7 or A4.
You can make a moving racing car out of paper
How to do:
- Fold the paper sheet in half lengthwise.
- Mark the fold lines by folding the top right and bottom left corners of the paper.
- Form a curve at the top of the sheet with inner triangles in the center.
- In the central direction, bend the existing triangles again.
- Bending sides inwards towards the center line, we form the sides of the car.
- Fold bottom part sheet with triangles over the top of the craft, then bend the figure in half. Tuck the corners into the pockets.
- Now the car model can be decorated as you wish.
By helping and guiding your child’s work, you can build a whole racing fleet.
How to make a truck out of paper
The figure of the truck looks more impressive in a three-dimensional format.
You will need:
- Thick paper;
- Glue, scissors;
- Wooden skewers;
- Double-sided tape;
- Plastic bottle;
- Compass, pin.
The figure of the truck looks more impressive in three-dimensional format
How to do:
- Cut separately four squares for the cabin, three equal rectangles and two squares for the body.
- Fold two boxes from the cut out figures and connect them with fastenings using tape inside. First, you can cut out the side windows from two squares of the cabin, securing pieces of plastic from the inside with tape. We do the same with the front of the craft, imitating a windshield. Glue the cab and body parts together.
- On black paper, use a compass to mark eight small circles of the same size with a central point. For stability, glue future wheels together in two circles. Make a small hole at the center point with a pin.
- Attach the wheels through symmetrical opposite holes on the sides of the figure, placing them on skewers through the hole.
- Color the figure of the truck with paints as desired.
The stability of the model will be ensured by the strength of the wheels - the more circles glued at the base of the wheel, the better the craft will be.
How to make a war machine out of paper
You will need:
- A sheet of thick paper, dark green;
- Skewers;
- Scissors, compass;
- Pencil, ruler, glue;
- Black paints, brush;
- Paper or plastic cocktail straws.
the finished product can be further decorated
How to do:
- Draw four squares for the cabin. On another sheet, draw three rectangles and two squares for the body. Take a sheet separately, fold it lengthwise into three parts, glue it into a triangle - this will be a mount for rockets.
- Draw side windows on the cabin parts and a windshield on the front square. Glue the squares together on the wrong side with tape or strips of paper.
- Connect the car body parts in the same way. Glue a paper triangle at the top.
- Combine the finished cabin and body into a single model of the car.
- Make eight identical circles with a central point from black paper. Use a needle to make a hole in the marking for the skewers.
- Make holes at the bottom of the cabin and body with skewers, and string wheels on them. To prevent the structure from falling apart, soak the ends of the skewers in glue and dry.
- Cut the cocktail tube into equal parts, about 3 cm each. Paint all the pieces black. Let dry thoroughly.
- Carefully place homemade rockets on the body mount with glue.
To decorate a military vehicle made of paper, you can paint the finished product with dark spots on the sides (or stripes along the hood) with watercolors.
Paper racing car
This racing car figure is designed for little ones.
Necessary:
- Toilet paper roll;
- Paints, brush;
- Cardboard, compass, scissors;
- Toothpicks 2 pcs.
This racing car figure is designed for little ones
How to do:
- Clean the paper roll from any remaining toilet paper, paint it in the desired color with watercolors. Draw when dry ballpoint pens racing designations.
- Using a compass, mark four equal circles for the wheels, cut them out, and paint them with black paint.
- At the base of the roll, use a pin to pierce the holes for the toothpick axle.
- Thread the roll onto toothpicks and secure on both sides of each wheel.
- Cut a semicircle at the top, bending the outer part like a windshield.
- You can put a man cut out of paper inside, attaching it with tape.
To make your car wheels spin, place a drop of glue on the ends of the toothpicks. Dried glue will prevent the paper wheels from being removed when moving.
Paper diagram of a car: how to make it
The machine's deployment diagram can be downloaded from the Internet. The presented models allow you to make any type of equipment out of paper, from special equipment to Soviet times.
To make a figure according to the diagram you need:
- Selected car model diagram;
- Scissors, cardboard;
- Glue.
How to do:
- To ensure the stability of the future figure, paste the picture of the diagram onto cardboard. After drying, trim.
- Fold the layout details along the lines. Glue them together, carefully hiding the gluing points.
How to make a paper car (video)
Assembling an origami machine or diagramming one will seem a little complicated at first. However, a fascinating and educational activity will delight the future designer. Handmade develops the baby's thinking, helping to improve hand motor skills. And the car you make will become your favorite of all toys.
(No ratings yet)
Today's master class will be devoted to creating a paper machine. The technique for creating such a craft is quite simple; even a child can make this machine. To get started, prepare the following tools and materials:
- thick colored paper of medium or high density in red and white;
- durable cardboard in black and white;
- ruler;
- pencil;
- glue;
- scissors.
First we must create the base of the machine, that is, the body. From thick colored paper, any shade you like (we in this case We will use dark red paper), cut out a rectangle.
Then we draw the outline of a circle on a sheet of white paper, and then cut it out.
You also need to cut out two pieces like this.
Now this blank must be glued to the base (red rectangle). Try to glue the part closer to the edge.
We make a hole like this in the center of the leaf. You can do it with scissors or a stationery knife.
Then we glue the remaining two parts on the other side of the workpiece.
Then we cut out these blanks. Also create four white circles, but of a smaller diameter.
Glue the white circles into the center of the black ones.
Now you can connect the ends of the machine base. This is what will happen in the end.
Then we glue the wheels to the side parts of the car body.
Then, also from black cardboard, we cut out the seat and glue it, but to the back of the car.
And there was the final touch - cut out any number from cardboard of a suitable shade and stick it on the hood of the car (in the center of the white circle).
Now the paper machine is ready!
In the future, if desired, the child will be able to paint the car or cut out some additional parts for it.
The more colorful and varied the playground is, the more fun you can have there. Even banal sandboxes and slides can bring kids a lot of joy. And if skillful dads get down to business and make photo cars for the playground with their own hands, then the children’s joy will know no bounds. To make children's transport you will not need expensive materials or complex tools. The work ahead is quite simple, even older children can be involved in it.
Transport for young racers
Game elements in the form of transport always attract the attention of children. After all, sitting behind the wheel of an almost real truck or motorcycle, it’s so easy to imagine yourself as a dashing racer.
The easiest way is to buy such a complex, but it is much more interesting to make it yourself. The main criteria that must be adhered to when making a car for the playground with your own hands are safety and aesthetics. All parts must be firmly fastened together, making sure that bolts and nails do not stick out. If the car is wooden, plan the logs and boards well, protecting children's hands from splinters.
Wooden train
Train made from sawn wood
Mobile sandbox
Idea for old tires
You can make a car for the playground from a wide variety of available materials. Even if the game element only vaguely resembles a real car, it doesn’t matter. Children's imagination knows no bounds, so a simple log can turn into a racing car or a passenger train. A mandatory attribute of any vehicle is a steering wheel. It will be great if it becomes a real steering wheel. However, you can also do it yourself; realism is not at all necessary.
Children's cars made of wood
Look at the photo - these wooden cars for the playground look very cute. To create them you will only need boards, logs and a little bright paint.
You can use ready-made boxes different sizes. A large container will make a truck body or an entire bus, and smaller containers will make a cabin. A sandbox designed to look like a car looks interesting. For this purpose, the sides are made higher, wheels are attached to the sides, and a cabin is attached to the front.
Simple wooden car
Using the same principle, you can make an unusual motorcycle for the playground with your own hands. Its basis will be a small bench, the steering wheel will be blocks of wood. Wheels can be real or cut from OSB sheet.
Toy transport made from tires
It is very popular to decorate a children's playground with car tires. Game elements made from this material are durable and, most importantly, safe. Rubber is less traumatic than wooden or iron parts.
For the little ones
From old tires you can easily make unusual cars or a motorcycle for the playground. This type of transport is suitable even for the smallest children.
Metal game elements
Craftsmen who own welding machine, can build a metal car. This complex, which includes a small horizontal bar or ladder, is perfect for older children. If there is a seat in the car, it is better that it be made of wood.
A car made from a real old body will cause special delight. It is enough to clean it of rust, paint it in a bright color and attach a steering wheel. Thus, an item intended for disposal will acquire new life.
Metal play complex made of pipes
Instructions for creating a simple wooden car
To make a wooden car with your own hands, you will need carpentry tools: a hacksaw, a hammer, a plane, as well as nails or screws. The material will be OSB boards and sheets.
Stages of work on building a truck with a sandbox body:
- Before construction begins, raw boards are well planed and sanded. They are impregnated with drying oil to resist rotting.
- Make at least a rough drawing of the future truck on paper indicating the main dimensions. Mark the contours of the body and cabin on the ground. To make it convenient for children to play, the part with the sandbox is made quite spacious, for example, 180 by 100 cm. The body can be of any size, but such that the kids can go there.
- At the site of the body, remove the soil with a layer of 30 cm, cover the bottom with geotextile or tarpaulin so that the sand does not mix with the ground. Four posts 40 cm high are dug into the corners. Boards are screwed to the posts, forming a sandbox box that serves as a body.
- They begin to build a cabin close to the sandbox. To do this, dig posts in the corners of the passenger and engine compartments, then screw planks or cut OSB sheets to them. The hood lid can be made liftable using conventional door hinges. The space under the opening hood will serve not only for games, but also for storing toys.
- A steering wheel is attached to the cabin, and on the sides of the car there are wheels made of tires or cut out of logs. The finished wooden car is painted.
Car with sandbox
DIY tire car
Making your own car out of tires for a playground is even easier than making one out of wood. To work you will need 11 old tires from passenger car, 2 seat boards and steering wheel.
Stages of work on creating a car from tires:
- They mark the contours of the car directly on the ground and lay out old tires on them to get an idea of how the finished car will look. Four tires are placed on the sides, simulating wheels. It will take another five for the seats, and two for the engine compartment.
- Remove the tires and dig holes for them. There is no need to dig very deep; a third of the height for the wheels and half for the back will be enough. The distance between the wheels is made so that a seat fits between them.
- They put the tires in place and then cover them with earth. At this stage, a steering wheel attached to a long pipe is installed. It must be firmly dug into the ground, because little racers will drive recklessly and can break the shaky structure.
- Tires for the seats are placed between the wheels, and rather wide planks are placed on them. The car is painted, decorated with headlights and old wheel caps.
Racing car made from old wheels
Motorcycle for the playground made from scrap materials
Making a gaming motorcycle from old tires is very simple. They dig two tires into the ground one after another, and between them leave a place for sitting from a block of wood or a plank. The steering wheel is mounted at an angle in the front tire. More complex models require three or four tires.
Stages of creating a motorcycle from four tires:
- Mark the outline of a motorcycle on the ground. If there is a small bench on the site, you can include it in the overall ensemble, then you will only need three tires.
- The two rear wheels are dug vertically to a third of the height, leaving a seat between them. The third wheel is dug in at the front.
- Another tire and a seat board are placed between the rear wheels. The steering wheel is attached to the front wheel.
Motorcycle for playground
There are a lot of design options for cars and motorcycles for children's playgrounds. The design can be complicated by adding additional tires or wooden elements. Undoubtedly this vehicle, made with love, will become the main place for children's games.
Useful tips
Some parents like not only to buy their children various toys, but also to make interesting toys with their own hands.
Very often, a toy made with your own hands is simpler and more interesting than factory ones. In addition, such toys are safer, since they are usually made from paper, cardboard and wood, which is much safer than plastic.
Here are the most interesting of them:
Homemade toys (photo)
Smart board with keys, phone, locks, wheels, keychains and letters on magnets.
Many people know that children can play with any thing that interests them. It could be beads or a smartphone - anything that can be studied.
One handyman created this wooden truck for his children.
And here is a board in the shape of a ship, on which you can find a calculator, locks, a lanyard and much more.
One parent decided to improve his child's playhouse by decorating the walls with switches, door handles and threads.
Read also: Children's drawings that were turned into real soft toys
DIY toys at home
Children love to build a railroad, so parents made this colorful railroad with toy cars and trains for their child.
Almost anything can be made from cardboard. And if you add adhesive tape and markers or paints (gouache or acrylic paints), then you can create houses, car parks, tunnels and palaces.
DIY cardboard toys
The child had accumulated a lot of cars, and his parents decided to make him an excellent, convenient parking lot out of cardboard and acrylic paints.
A doll house based on the popular video game Super Mario.
It all starts at the top of the structure, where the princess is surrounded by cotton wool clouds.
Then you can choose one of two directions through the pipes: to the world of mushrooms or to the very bottom to the main villain.
DIY toys (photo)
Constructor for balls
Parents spray painted it necessary details(pipes and fastenings), and then attached them to the fence so that small balls and beads could be thrown through the pipes.
Homemade toys for children
Experiments with liquids and sand
The parents attached several tubes to the perforated fiberboard, and upper end Each tube was attached with a funnel so that it was easy to pour liquid or pour sand, which would go down through the tubes.
To better see the water flowing through the transparent tubes, you can pour it into several containers and add food coloring. So for each pipe there will be water of a certain color.
DIY toys from scrap materials
Cardboard labyrinth
To make such a toy you will need:
Cardboard box
Scissors or utility knife
A set of sticks for children's crafts (can be replaced with cardboard)
Paints or stickers (to decorate the maze)
Hot glue (with glue gun)
A coin of medium or large diameter or a cap from a plastic bottle
Pencil.
1. Take a suitable box and, if necessary, cut off one side so that you can build a maze inside it.
2. Prepare a set of sticks for children's crafts or simply cut cardboard into strips. As you create the maze, you will trim these strips with scissors.
3. Before starting construction of the labyrinth, it is better to draw it with a simple pencil, and then glue strips of cardboard or wooden sticks to the drawn lines.
4. Start gluing cardboard strips or sticks edgewise to the drawn lines with hot glue, trimming them where necessary.
5. To make “traps”, trace the coin with a pencil and, using a stationery knife, cut out a circle that will fit a ball, bead or marble. Cut the traps so that a bead or ball can pass by them.
If you want to keep the bead from falling on the floor, bend (and trim if necessary) the sides of the box and insert it inside another box (see image).
How to make a toy with your own hands
Toy car park made from a box and cardboard toilet paper rolls
You will need:
Box or crate
Toilet paper rolls
PVA glue or hot glue
Scissors
Acrylic paints (optional).
You need to glue the cardboard sleeves inside the box.
If necessary, cut each sleeve in half and then carefully glue it.
You can make a helipad on top.
Decorate the craft as you like. You can use acrylic paints and stickers.
How to make a toy with your own hands (video)
All boys love to play with cars, but not everyone can make them themselves. Therefore, it will be useful to learn how to make a paper machine with your own hands. This is exciting This activity will help develop your thinking and your baby’s perseverance. Materials for crafts are always at your fingertips.
Making a three-dimensional paper toy
To make a 3D car you will need:
Making a car with your own hands is very simple. For this no special skills required, you must adhere to the following instructions:
There are two options for cars for 3D crafts: multi-colored and those that need to be decorated.
Making a Fire Truck
The fire truck is loved by many children, but finding it on store shelves is not easy. To make it yourself, you will need the above materials, patience and accuracy.
The principle of operation is the same as with volumetric machines, so there is nothing new here. But there will still be a hint. Try to bend contours with a blunt object, it's easier. It is better to use cardboard for drawing. When everything is glued, you can proceed to the stairs. Top class if the stairs can be raised and extended.
Paper crafts from scrap materials
With age, every boy wants to improve his cars. It becomes too easy to apply patterns for it. So we can start to crafts from scrap materials. You will have to wait until the age of 3, since these materials can be dangerous for the baby.
All boys love racing, which means they will definitely love racing cars. The means at hand for making them can be found in every home: matchboxes, colored paper, cardboard, small wooden sticks.
First, roll up a cylinder or take the one left over from a toilet paper roll, cover it with something colored and cut a hole in the middle. It will be driver's cabin. We cut out four wheels from black cardboard and glue white circles in the form of disks in the middle of each. The child will be happy to color the resulting design as he likes.
The best way to make a truck is from a matchbox. To do this, take the outer part and cut it in half. Place one half horizontally, and place the second half vertically close to the first. The inner part must be pushed into the horizontal half . This is how we get the trunk. We cut out seven wheels, attach four to the trunk, and two to the body. We attach the fifth wheel to the rear of the trunk. This will be the spare tire. We finish drawing the little things: windshield wipers, shiny glass, door handles and bolts on the wheels.
Origami car
A more complex option is an origami machine made of paper. No other available materials are required. There is no need for gluing either, since the strength of the modules will be high. But assembling the car itself will have to work hard. Module can be done different ways , but they are all attached the same way. To clearly see how the module is made, take a look at the figure.
Development diagrams, patterns, templates
Paper crafts are useful for children. And the more your baby makes something with his own hands, the further he develops. Of course, modern boys choose a simpler method - toy cars or ready-made racing cars, police and military vehicles.
Many people simply find paper models uninteresting because they “don’t know how” to drive. This raises the question - how to make a car out of paper that drives? It’s quite easy to use lids from cardboard wheels instead of cardboard wheels. plastic bottles. And pairs of wheels can be connected to each other using wires or lollipop sticks.
Several designs or templates for toy paper machines.
Attention, TODAY only!