Palm from plastic bottles Creates an unusual harmony in the garden or on the plot. It seems that you rest on the seashore, but around the palm and sand)))). Today dear friends We will look at two interesting master Class for the manufacture of beautiful palm from plastic bottles with your own hands, the author of the data master classes is Olga Akimova and Safater Eshilev. It's not a secret to anyone that a plastic bottle has conquered many of us, because it is a clean material that is very easy and simple to use. Besides, that a lot is important, it is cheap Materialwhat for many has great importance. Crafts from bottles will serve for a very long time, because we all know that the bottle is decomposed very long. So making crafts from them, we purify an environment And creating something interesting and beautiful for yourself. If you suddenly have accumulated a lot of plastic bottles, then it has come to use the time to use them for their intended purpose, which means that you can make a beautiful palm tree.
Probably many of us want the summer to laugh in their site, this is just a palm tree from bottles and will decorate on the plot and we will prolong our imagination at least a little summer. Palmry says Olga very easily, even the newcomer will cope with this task.
* Scissors.
* Metal rod.
* Drill.
Method for making palm from bottles:
Before the manufacture, it would be good to understand first of the size we will make palm trees and where we install it with you. If you have children, then make such a palm tree on the playground. Believe the children very much like such crafts and they gladly play near them.
We take plastic bottles and look so that they are all clean, if there are dirty, then you need to wash them. We definitely remove all the labels from the bottles and then you can start making.
Take brown bottles and cut off the bottom of them for the height you need.
Now we need to make the branches of our palm tree, for this we take a green plastic bottle and cut it along almost all over the entire length and then we cut it around the edge (as if we do strokes-car).
We take the drill and begin with it to do in every workpiece from the brown bottle of the hole. The holes should be like a diameter of a metal rod.
We did all the blanks, go to the assembly of palm trees, we will make the trunk. We take the brown bottles and the teeth of them will be flexing with outwards, and then begin to wear a metal rod. In turn, insert a bottle into the bottle, look like on the photo.
From above when the trunk is ready to dress the leaves that made from a green bottle. The leaves on the tree are fixing: when the mode is the last bottle on the leaves, we leave the neck with a cork. In traffic jam, we make a hole in the size of the metal rod and fit tightly, it does not need any other fasteners.
That's all, palm from plastic bottles is ready. Look at what kind of beauty turned out from Olga and most importantly such crafts will serve you for a very long time and it's not afraid of rain nor frost.
Palm of plastic bottles with coconuts
Palm trees are needed, palm trees are important. Sasha turned out a little different but also very interesting and beautiful palm trees also with coconuts. Let's look at the process of making it, because someone will like this palm tree and someone else, all the tastes are different.
For the manufacture of palm trees, we will need:
* Plastic bottles of green color.
* Plastic brown bottles.
* Scissors.
* Metal rod.
* Drill.
Method of making palm trees with coconuts:
We first take the trunk, take brown beer bottles of 20 pieces. So many bottles required Sasha for the manufacture of one palm of 1 m. Height.
Sut off at the bottom of the bottom closer to the base. Cut the bottle then five parts.
Now we will make the bottom foliage of the green bottle. Cut off the bottom and cut it into 5 parts, you will need three billets.
Cut onto it the foliage as shown in the photo.
Fighting the foliage as shown in the photo.
That's how you should work.
We take 2 liters. Plastic bottle of green color.
Also cut off the bottom.
We cut almost along the entire length of thin strips. Tips need to sharpen.
This is such a blank for the manufacture of palm trees.
We begin to collect the bottom foliage on the iron rod. First we insert the blanks that are cut into stripes.
Then we insert the blanks on which they cut out the foliage.
We continue, cut out of 2 lithon bottle Makhrushki
These are such a workpiece.
Of the 1.5 liter bottle, too, the Machruca regime.
For the manufacture of palm branches, it will take billets from 1.5 liter and 2 liter bottles.
If you do not have a lot of green bottles, then transparent bottles can be painted with green paint.
All bottles cut stripes.
At all bottles, we put the lids and drill on 8 mm.
Corners from bottles can be inserted between bottles, it is in order to save bottles.
0.5 l. Bottles cut in size and insert the branches on the ends.
Here are our billets before assembly, you can proceed to work.
We first collect 1.5 liter, and at the ends of the branches 2 liter bottles.
It remains to make coconuts, because we have a palm tree with coconuts. For this Sasha used the old balls, I ordered them with a thin wire that it was for something to be attached.
Kych them in brown. When they get dry hang them on the palm tree.
Instead of the trunk, we use an old unnecessary pipe for 15 and 2.5 meters high. Two holes in it are 8 mm in it. Branches - wire roll 7 mm. 2 meters 1 meter per face.
All palm trees with coconuts is ready.
Copyright © Attention!. Copying text and photos can only be used with the permission of the site administration and indicating the active link to the site. 2019 All rights reserved.
Many owners of summer cottages seek to decorate the native territory. For this, the figures from the gypsum are often used. However, in recent times, crafts are becoming increasingly popular, often cast materials. Products from plastic bottles won special love from the masters. The craftsmen create one of them with their own hands a variety of compositions, including exotic trees.
Bottles crafts: variety of options
Decorate your own pricework You can various crafts made on the basis of plastic bottles. Such a solution simultaneously solves 2 problems - disposal of garbage and decoration of the territory.
With this program, you can make a flower beds. Craftsmen also create from it:
- stuffed;
- curly flowers;
- sparrow;
- trees.
Original volumetric raw materials are obtained flower compositions, decor for registration mirror Ram., unusual pots, plants, cats. Through such garbage, you can make cute and funny cats that will become a business card of the garden.
However, unusual plastic palm trees have become specially popular. There are several technologies for the manufacture of a tropical tree. In any case, the composition is extracted with an extraordinary and throw.
Palm with plastic bottles: step-by-step instructions with photos for the creation of the base of the trunk
Based on the photo and step-by-step instructions, create palm with your own hands will be quite simple. You can involve in the process of children and all households, since it is truly fascinating and interesting.
To work it will be necessary to prepare:
- at least 100 pieces of plastic bottles of brown and green;
- candle;
- wire;
- iron pin or fittings;
- scissors.
On a note! To create an extravagant tree, you can use the material and other shades. If there is no raw material required, it is worth using transparent bottles that are then easy to paint.
Optimally use capacity of 1.5-2 liters. Of these, the design of the most natural external view.
Step 1 - First preparing the trunk of palm trees. For this, brown containers are applied. Knife they cut in the middle. The lower fragment is recommended to do a little more. You do not need to throw away. Everything will be used in the work.
Step 2 - Half with a neck is caught. It is necessary to do this in eight places. Cuts are performed to the area of \u200b\u200btank narrowing.
Step 3 - a petal is formed from each fragment obtained. Optimally give each part shape of a triangle. At the reason, it is necessary to make a fold, after which there should be peculiar flowers.
Step 4 - Fragments with a bottom will need to be cut on the same principle. In the middle of each detail, it is still necessary to make a hole with a diameter equal to the size of the neck.
On a note! To work with plastic it was easier, it is recommended to use a hot knife.
Palm from bottles with your own hands: Making foliage
After the basis is ready, you can move to the creation of foliage. Relying on the master class, the work will not seem difficult. To do this, use green bottles.
Step 1 - You should cut off the bottom at bottles and neck.
Step 2 - Moving from below, it is necessary to cut the blank to the equal parts to the scissors. Must get at least 3-4 fragments. It does not need to reach the very edge. Optimally leave the edge of 2-3 width. Fragments should remain the base.
Step 3 - Forming sheets. The lower parts of the cuts will need to be slightly twisted so that they turn out round. In the neck area, fragments are recommended to be narrowed, after which they need to straighten them on a flat surface.
Step 4 - All the large details must be closed on each side. In the center should remain 2 cm. Scissors need to be put on the oblique path. The cuts should go to the aligned center from the parties that were rounded.
Note! In order for the composition to be lush and bulk, each strip must be accelerated through one up and down.
How to make palm from plastic bottles: video with harvesting
When all fragments for palm trees are prepared, you can start assembling the composition with your own hands.
On a note! Iron pin either polypropylene tube Ideal for rod. The main thing is that the diameter is small, since it will be necessary to fix all blanks on this material.
The desire of a person to decorate its home is not limited to an apartment or at home. Going out to the street, it is embodied in flower beds and barisades, in garden bushes and trees. But seasonal changes in nature constantly make adjustments to the beauty we created.
But, how to create such a picture from the subwoofers capable of please the eyes for many years? We will tell in this article.
Material for artificial palm
Raw materials for the manufacture of man-made palm trees will be plastic bottles. This is one of the most common containers on the planet for various drinks.
To create a palm you will need a large number of Simplicate plastic bottles of two colors:
- brown: from under the kvass or beer - for the tree trunk,
- green: from under sprite, Tarkhun or the same beer - for her leaves.
They can be several forms, in this case they will have to alternate them when assembling, but it is better to have the same, coinciding and in color and in form.
The workpiece of the material and will be the most difficult work in the process of "growing" palm trees from plastic bottles with their own hands. But if you have children, and they have friends, then all work can turn into an exciting cultural and educational event with a small palm grove in the end.
Or not end with one palm trees.
Before using the bottle, it is necessary to wash the remnants of the beverages in them not become the adhesive base for dust, and remove the labels and remnants of the glue, which they were glued.
Assembling palm trees from plastic bottles - step by step for beginners
The options for manufacturing plastic palm trees are very much, consider the most common.
1. Barrel.
The basis for it can serve:
- metal rod or fittings;
- wooden pillar;
- dried tree.
Consider the options for the manufacture of palm trunk. For the manufacture of the trunks of these palm trees, various technologies were applied.
IN first case The bottles simply cut off the top, and they rode on the rod, inserting each other. This only remotely resembles the trunk of palm trees, but it simply does not require such a large number of bottles like other ways.
Second option It resembles the first, but in it the tops of the bottles are cut off with a crown, the cloves of which are slightly turned outward.
The third - requires a sufficiently large number of bottles, but in this way, very thick grounds can be decorated, imitating real species of palm trees with thick trunks, or turn the trunks of dried trees, freed from the extra branches.
Sometimes, not to look for such a huge number of brown bottle of the same type, collect the same white, and after screwing their bottoms with self-draws to the wooden base of the trunk, painted with it in one brown color.
Can do it resistant to burnout acrylic paints or car enamels, although some use cheaper nitrocracies from aerosol cans. Sometimes a tassel, after drying the first layer, the recesses are painted in more dark colorIt turns out more realistic. Better after painting everything is covered with colorless frost-resistant varnish.
On the formation of the stem fourth way It also takes quite a large number of bottles, but such an imitation looks even more believable and beautiful. Get such scales using the curvature of the legs of the bottles.
In contrast to the previous options formed from the bottom, the set of such a "bark" is carried out from the rapel part of the "trunk" when the fasteners of the upper layers (self-tapping screws, nails, brackets) are covered with the bottom, and the lowest bottoms in the ground or pumped it.
On the same method similar and fifth option, Only it imitates the type of palm trees, the bark of the leaves, who leaving the thick pieces of the cuttings behind the growth of the trees. You will not describe how it is to form its formation, it is clear from the photo.
And we will illustrate step-by-step photos the simplest of the textured methods, only unlike the photos on which it is shown, and where only the lower halves of bottles are used, we will use all the material. We took a white bottle in order to be a noticeable markup.
To enlarge the pictures, click on it.
The upper part of the bottle, after cutting and bending the tips, turns around and is inserted into the bottom. Both are placed on a metal rod forming the barrel and bending to your taste. For this, the holes of the desired diameter are drilled in the ramps of the bottles, as in the photo.
It is not so large: for the 3-meter trunk you will need 19 - 20 double-liter bottles.
For massiveness and resistance to fmining plastic, in the future, during the internal sets of bottles, you can float sand.
2. Leaves.
Some of them only in a very large distance resemble palm trees, but they are easy to manufacture.
More difficult when you need to work with scissors.
To enlarge the pictures - click on it.
Over the edges of the leaves can be slightly put out open fire, as in the last photo of this selection, and they will get more natural viewbecause in nature leaves with rectangular ends does not happen.
Reliable fastening will be, if to welcome the puck with the tubes, in which the metal rods of the palm branches are inserted into the metallic rods. To the wooden trunk, such a washer can be fastened or simply departing it and insert trimming of metal tubes.
You can collect branches using the bottles themselves.
And you can, cutting off the neck with carvings, use the stapler. Or, inserting the bottle leaves one to one, fasten on the rod only the last.
Video shown step-by-step manufacture Palms made of plastic bottles:
Minipalm from plastic bottles, video
If you are not ready for the global embodiment of the idea of \u200b\u200bplanting palm trees from plastic bottles, such as on the first photo, then you may like a minimalistic idea.
To enlarge the pictures - click on it.
The method of making leaves of one of these domestic palmocks we described, and the video structure for the manufacture of such a composition can help you in its manufacture:
It is also interesting in one of the ways of manufacturing a trunk, which can be applied and in the production of larger palm trees in the courtyard, and another method of thermal processing of plastic mentioned by us earlier.
Artificial coconuts, bananas and other palm trees fruits can be made of polystyrene foam, pasted with paper and painted. If you paint them into several layers with acrylic paints for outdoor work, they will be able to live for quite a long time and on the street.
And finally, another video:
Dear readers, if you have any questions, ask them using the form below. We will be happy to communicate with you;)
Country areas, especially in the middle strip of Russia, cannot boast of exotic plants from hot countries, first of all, because these plants need a completely different climate. But so I want to once mentally return to the warm sea, sit under the palm tree and look at the sunset. And if the seas in the country can not be organized, then "cultivate" the palm tree is very simple, it is enough just to give a large amount of empty plastic bottles. In this article, we offer you a master class on making palm trees with their own hands.
First of all, you need to say that there is a lot different ways Build such palm. And they all get different, but very similar to the real:
In our master class we will try to make palm trees, as in the photo:
We make palm from plastic bottles
For the manufacture of palm trees you will need:
- Plastic bottles (at least 100 pieces, green and brown)
- Scissors
- Candle
- Piece of reinforcement or iron pin
- Wire
Step-by-step instruction of palm collection:
1. First of all, all the bottles must be prepared: wash, clean the labels, remove the safety rings for the cover from the neck. Any bottles are suitable from the smallest to large.
2. Using a knife from green bottles to cut the bottom. The bottom is cut as closer to the edge as possible, so that the remainder of the bottles was longer, then the palm leaves will be fluffy and large.
3. The bottle is cutting. 1.5 liter, liter - for three parts, 2List - on 4. Cut the bottle to the throat itself, and each petal to trim around the edge - to give the desired shape.
4. We make a fringe on each leaf - very finely, so Palma will be more magnificent. In the center there should be about 1 cm untouched bottle.
5. We light the candle and bring the outer side of the petal to the flame. The fringe will get an interesting form, and will become more alive.
We have a blank, and we must make them 36. Six branches. And on each of them 6 leaves.
6. The next stage is the preparation of the place of "landing" of palm trees. The iron rod is taken and pods centimeters to the ground by 30-40.
7. Brown bottles cut down the bottom as you can smoothly and put on the rod. Then we put on this bottle the following, etc. until the end of the rod.
8. With the help of welding rods or thick wire, it hide all 6 branches among themselves. To do this, in the upper bottle of the trunk, you need to do 3 holes throughout (cross-crosswise). Throw through them a thick wire and on this wire to wear ready-made branches with leaves.
9. At the bottom of our 6 branches there are covers in which 2 holes need to be done. The wire stretches through the entire branch and twisted at the top (there is the same cover with 2 holes). Another opening must be done to attach the branch to the welding rod at the base.
As a result, we have a wonderful palm tree (in the picture is small):
There is another way to make a palm trunk, as a result of which the palm tree will have a slightly different view:
1. To create such a trunk, you need to cut brown bottles so that bottom part It was a little more. The upper part is cut on 8 parts to the place of narrowing the bottle, and then cut the tips of each of the 8 parts so that they adopted the triangular shape and bend at the base, in the same way and with the bottom of the bottle, but it is done in it, equal to the diameter in it Torch.
So, we told you how to make palm with plastic bottles step by step, now we suggest familiar with the video lesson on this master class.
We wish you achievements in creativity!
Instructions for the manufacture of palm trees from plastic bottles.
At the moment there is a lot of ways to decorate your country cottage area. For this, plastic bottles, tires and flower pots. If desired and good fantasy, you can independently come up with a new version of creating an exotic tree.
Basic materials for the manufacture of palm trees in the country:
- Plastic bottles
- Flower pots
Below are interesting and non-standard options for making palm trees for the country area.
It all depends on the size of the tree. If you have a cottage plot of large size, you can make a sufficiently high palm with a lush crown. It is enough for the trunk to take 10-15 plastic brown bottles. Approximate volume of bottles of 2.5 liters. The greater the bottle, the greater the barrel diameter. The crown will require 10-30 plastic green tanks. Such a run in quantity is explained by the fact that the form of leaves can differ significantly.
How from plastic bottles to make palm with your own hands stages: step-by-step instruction
There are a lot of ways to manufacture an exotic tree. Methods of cutting bottles differ in each other. It depends on the presence of free time and fantasy.
Materials for the manufacture of palm trees:
- 12 bottles with a capacity of 2.5 l brown
- 20 bottles of green in volume 1.5-2 liters
- Cable, thickness 1-1.5 cm
- Metal tube for stem
Instruction:
- Take brown tanks and cut the bottom along the outline of the recess, as a result, the bottom of the bottle must resemble an asterisk
- 10 cm before the neck bottle cut the capacity, it should be 6 petals
- On the steel tube, pre-inserted into the ground, take the prepared designs of bottles. You have to get a relief trunk
- Start the manufacture of leaves. It is necessary to cut in half green tanks and cut into strips top. The width of the strip must be 2-3 mm. The thinner the stripes, the fucking crown
- Now on the cable, use 4 plastic blanks. The cable must be rigid enough. It should be well bend, but also keep the form
- Top rod with trunk Attach a sheet of wood with 5 holes in a circle. In these holes, insert the prepared leaves. If necessary, correct the bottles
The trunk can be made by cutting the pipe from the plastic bottle. But there is a variant that will allow the use of bottoms. In this case, raw materials will need significantly more.
Instruction:
- As the basis for the manufacture of the trunk, you can use a flat wooden floor-needed height.
- Cut the bottom of the brown plastic bottle. With the help of screws, screw the bottoms in the barrel
- Do it in a circle, imitating palm trunk relief
- Continue to fasten the bottoms to the top of the top
- But you can make the trunk of palm trees and from the cylindrical part of the bottle
- For this, the lower part is cut off, and the bottle itself is only up to 6 lobes
- After that, the bottle is connected to each other.
The crown can be made using green plastic bottles. The thickness of palm branches depends on the number of plastic bottles.
Instruction:
- To do this, take green bottles and cut them into thin stripes, pre-cutting the bottom
- Thus, the branch is formed and several bottles, which are then bonded between themselves, by rolling one to another
- If the bottles are not so much, then you can make branches differently. For this, the green container is cut on 5 parts, not until the end of the bottle. In the neck area there is distance
- With the help of scissors along the edges of the cut-off petals, a kind of fringe is made. Need to make it sticking out in different directions
- The resulting leaves must be combined with each other, forming the crown
How to make a crown for palm from plastic bottles?
To do this, you need the basis, and the billets of the leaves.
Instruction:
- Take the copper cable to cut it into small pieces
- Load the blanks on the wire and secure the edge
- If necessary, bent the cable
- Next, you need to insert leaves for the bottom of the crown, it can be a metal ring or wood blank with holes
How to assemble palm from plastic bottles
Palm tree is going to bottom. To do this, you will need such components:
- Billets for trunk
- Metal pipe
- Crown
- Scotch
Instruction:
- Beginning from below, collect the trunk, having rushing one after another bottle. You can fasten them using scotch or hole patch.
- Collect the crown by setting the leaves in a checker order. Separate branches and drive them using the cable.
- You can give relief and fluffy leaves with scissors. Also to twist the petals use heating. This can be done with gas burner or conventional fire.
- It is necessary to connect with the help of a scotch when 30 cm remains to the top, it is worth collecting the crown.
- Attach the crown to the trunk. You can fix the top of the palm trees with the barrel with the help of a construction stapler, liquid nails or tape.
Make a palm tree from plastic bottles is not at all difficult. Enough to be patient and show fantasy.