When the old interior has become boring and you want changes, it is not necessary to start a renovation. Various additional items can change and enliven the interior. You shouldn’t immediately go shopping in search of something new and unusual. Don’t forget that you can create many masterpieces with your own hands at home. One of the practical and interesting things in the room is the ottoman. It comes in absolutely any shape, size, color.
You can fit it into any of the rooms and different styles. If you are wondering how to make an ottoman with your own hands, you will need a few useful ideas on this matter. But the main advantage of such an item is wide selection materials to create.
Ottoman made of multi-colored fabric
Sewing a bright ottoman from fabric is not a difficult task.
Before starting work you should prepare:
- fabric of different colors;
- lining fabric;
- filler;
- sewing machine;
- needle and thread;
- 2 large buttons.
You can use padding polyester or thick foam rubber as a filler. Then the pouf will be moderately soft and will hold its shape.
The first stage of work is the pattern. Draw a circle on paper the size you want the pouf to be. Divide this circle into 12 equal parts. Do you have fewer flowers? You can alternate them or divide them into 6-10 parts. Ready-made patterns applied to the fabric and triangular pieces are cut out. Cut them out with a margin that will be used for stitching. The fabric for the lining is cut in the same way.
The next stage is stitching. Grab the petals of the circle together on the sides with threads, and then stitch them onto sewing machine. You should end up with two round multi-colored bases - top and bottom. They need to be sewn qualitatively from the inside out. Leave one part uncovered to fill the pouf.
The final stage is filling. Place inside the case required amount filler. The pouf will immediately become voluminous. There should be a lot of padding polyester or foam rubber so that the pouf does not significantly change its shape when pressed. Carefully sew the last part. And close the place where the petals are sewn in the center of the circles with large buttons. Do-it-yourself multi-colored pouf is ready.
Plastic bottles as a base for a pouf
Plastic bottles have many uses in everyday life. When a considerable number of them have accumulated, you can make an ottoman with your own hands.
You will need:
- about 40 bottles including caps;
- soft foam lining;
- cardboard;
- wide tape;
- fabric for the cover;
- needle, thread.
Take bottles with tightly screwed caps and use tape to connect them to each other so that they form a filled circle. You need to cut out 2 circles from cardboard. Their diameter should match the diameter of the bottom of the glued bottles. Tape the cardboard tightly to the plastic containers. The frame for the ottoman is ready.
Then you should prepare the foam for the lining. 3 blanks are cut out: 2 circles of the same size with cardboard blanks and 1 rectangle. It will wrap vertically around the ottoman. You can secure the workpieces using threads or a construction stapler. All that remains is to sew a cover for the pouf from the desired fabric. This will not be difficult if you have minimal sewing skills. You can make a cute ottoman with your own hands quickly and cheaply.
Non-standard use of a plastic bucket
An old unnecessary plastic bucket can easily turn into a useful and beautiful thing - an ottoman.
For the ottoman you will need:
- jute rope or rope;
- building glue gun;
- cardboard;
- textile;
- stapler;
- large button;
- microfiber fabric.
A bucket without a handle should be turned over and wrapped tightly around with a rope. When winding, each stitch must be placed on glue so that the rope subsequently fits tightly.
When the task is completed, you can begin to build a soft seat for the pouf with your own hands. Take some cardboard, place it on the ottoman and cut out a circle the same size as the bottom. It is also necessary to cut a circle from the fabric, but with a larger diameter of 10 cm. Connect the fabric to the cardboard in the middle with a button. Roll the microfiber into a tube and begin wrapping it between the cardboard and the fabric around the button. Use a glue gun to secure. Roll the fabric until you reach the edges of the cardboard. Staple the top fabric to the back of the cardboard. The ottoman is ready, all that remains is to connect the lid and base using glue or Velcro tape.
Functional ottoman with a box inside
The task gets a little more complicated if you want to DIY and use the ottoman as storage space. Having a ready-made box will make the task much easier. But it’s also possible to do it yourself.
Prepare for him:
- 4 identical sized chipboard rectangles. They will be the edges of the pouf;
- 2 squares of chipboard for the base and lid;
- wooden blocks for fastening and small legs;
- screwdriver and screws.
If you do not have the skills of a carpenter, then it is better to ask a more experienced and experienced person for help when assembling the box. strong man. Assemble the structure from the parts, use screws and glue to secure it.
The seat is not attached to the ottoman; it should be freely removed and put on. To prevent the seat from moving during operation, stops are attached to it on the inside. It is necessary to attach the stops at such a distance that when removing and putting on the cover, they do not rub against the edges of the chipboard and do not touch the bars inside.
The frame of the box must be covered with fabric; it can be secured using a stapler. The inside of the box is also lined. Thick foam rubber should be placed under the fabric cover for comfortable sitting. This is how you get a practical ottoman with legs that will fit into any interior style. You just have to choose the right fabric.
Video gallery
Making an ottoman with your own hands classic style start with legs. Two boards 48 cm long and 5x5 cm in cross section are cut at an angle of 45 degrees. They are knocked down with a cross.
A block 35 cm long is glued to the resulting cross. Additionally, it can be secured with a self-tapping screw.
Another similar cross is attached to the top.
how to make an ottoman with your own hands. Photo
For seats take plywood 1cm thick and 40x60cm in size. Under the plywood they put foam rubber 10cm thick and a layer of synthetic padding with a margin so that it can be bent.
We bend the synthetic winterizer and nail it to the plywood. Then they take the upholstery fabric and also fasten it from the inside out.
For decorations The ottoman uses decorative nails, which additionally secure the upholstery.
DIY ottoman. Master Class
Cross boards are added to the legs. The entire structure is treated with stain.
Screw the seat to the base with legs. It turns out a comfortable, hand-made ottoman.
DIY wheel ottoman
To make an ottoman from a wheel, you need to take a wheel the right size and wash it thoroughly.
DIY tire ottoman. Photo
From plywood cut out two circles. One along the diameter of the inner part of the tire, and the second along the outer part, but so that it does not protrude beyond the boundaries of the tire.
To make legs take sample, traced, and then cut out of the board. A total of four legs are required.
The legs are attached to the base circle. They are placed at equal intervals and reinforced bars.
The legs are painted and glued to the base, and then secured additionally using corners.
Glue is applied to the base and the wheel is placed on top.
Glue is spread on top of it and the top cover is glued.
The tire is pasted over rope using hot melt glue. Rope can be used in different colors.
Finally, the legs are additionally painted.
Plywood ottoman
DIY ottoman step by step. Photo
Will help you make an ottoman with your own hands step-by-step instruction. They take plywood sheets with dimensions 45x45 cm and cuts of 45 degrees.
Vinyl is cut to the size of the plywood with an addition of two or three centimeters of margin. A soft cloth is placed on top of it, you can take thin foam rubber, and then covered with a plywood sheet.
The vinyl upholstery is folded and secured with a stapler, and the excess is cut off.
Corners are used for fastening. The screws should be less than the thickness of the plywood.
Paper with a pattern is placed on the surface of the vinyl.
DIY ottoman. Master Class
Decorative nails are used to complete this design, creating an interesting pattern and additionally securing the upholstery. The paper is then easily removed. The result is a beautiful plywood ottoman with an original pattern.
How to cover an ottoman?
An old plywood ottoman can be updated sheathing his new materials. For this they remove bottom part covers.
The new fabric is cut, tried on and secured, stapled at the corners.
TO top cover re-screw the bottom.
Measure the amount of fabric, making a reserve.
Textile mark. It is more convenient to do this on the ottoman itself, marking the seams with needles.
They try everything on the ottoman.
Excess fabric is cut off, and the joints ironing iron.
Attach the fabric to the top of the ottoman, wrapping it.
Then they wrap it on the inside of the product.
After this, the fabric is stretched at the base and nailed staples. The result is new do-it-yourself ottomans made from old ones.
Ottoman made of plywood and fiberboard
From pine timber making ribs for the pouffe.
From Fiberboard cut out squares of the same size. The bottom and seat will be made from them.
Assembled using self-tapping screws frame products. Its sides are covered with sheets of plywood.
First, the base is pasted over polyurethane foam. To give the ottoman made of fiberboard and plywood additional softness, it is supplemented with padding polyester.
While the structure dries, they cut it out case. You can take flock or leatherette.
The details of the cover are stitched using strong threads.
The finished cover is placed on the pouf.
It is secured from below furniture stapler or an air gun.
To make the product look more aesthetically pleasing, the bottom is sealed non-woven fabric
Finally, the legs are attached.
DIY cylindrical ottoman
Consider a master class on making a cylindrical ottoman. To do this you need to cut out circles Chipboard required sizes and timber parts of a certain length.
We connect the circles and timber with self-tapping screws frame.
A sheet of chipboard is attached to the frame around the perimeter, making a wall.
Take foam rubber and synthetic winterizer. The latter is needed to smooth out the folds.
Foam glue is applied to the frame.
A layer is attached to the seat foam rubber four centimeters thick. Then the entire structure is tightened padding polyester.
The case is made from a suitable material.
The cover is put on and secured from below with a stapler or nails.
The legs are attached to the underside.
Making a cylindrical ottoman with your own hands is not difficult if you follow the instructions.
Ottoman with storage box
To make your own ottoman with a storage box, you need to follow the instructions. First, prepare the material: cut out two blanks from Chipboard with dimensions 37x40 cm and 37x37 cm, as well as one square 40x40 cm.
From timber With a cross-section of 4x4 cm, four parts 37 cm long are cut out.
From the resulting fragments they collect box, whose height is 37cm.
The timber is secured in the inner corners with wood glue. From the outside, the corners are fixed with self-tapping screws or metal corners.
Glue is applied to the bottom and timber. Glue the bottom and leave to dry.
After drying, the bottom is secured with self-tapping screws.
To do cover, four locking bars are attached to the square sheet to secure the lid in the box.
All that remains is to cover the lid with soft material. For this purpose, foam rubber, batting, synthetic winterizer, and upholstery fabric are used.
Fluffy foot ottoman
A master class on making an ottoman will help you make such a product. It will require four ready-made furniture legs and a circle of plywood or natural wood.
Cut out the size of the circle foam rubber, and then cover it with padding polyester. The excess material is cut off, and the main one is secured on the wrong side.
To secure the legs, four holes are drilled. The legs are screwed into them and the finished ottoman can be used. But to make it look more attractive from the bottom, a circle with holes for the legs is cut out of the fabric. It is placed on the base and secured with furniture nails.
How to sew a soft ottoman?
To sew a soft ottoman you need to proceed in stages. First, an inner case is made, which will contain filler. To do this, cut out two circles from thick fabric. Their diameter should be approximately half a meter. If you need a square ottoman, then two squares. These will be the top and bottom parts of the product.
Then a strip is cut out with a length equal to the circumference or perimeter, and a width equal to the height of the pouf. Be sure to take seam allowances into account.
The resulting strip is sewn from the inside out. First sewn to the bottom and then to the top of the ottoman. The finished cover is turned inside out and stuffed suitable material and the hole is sewn up.
What remains is the ottoman decorate To do this, a decorative cover is sewn on it. The procedure is the same as indicated above. Only in the middle part they do not sew up the hole, but insert a zipper into it, sew on Velcro or buttons. Absolutely any fabric can be used for a decorative cover.
DIY ottoman made from a plastic bottle
Let's look at how to make an ottoman out of bottles with your own hands. Take two large plastic water bottles. They are cut and the two parts are combined to form a part of the required height.
Details on how to make an ottoman from bottles with your own hands can be seen in the photo.
For the base and seat, take circles from Chipboard. A plastic base is attached to one, and the second is attached on top.
DIY plastic pipe ottoman
Consider a master class on making an ottoman from plumbing pipes.
First the pipes cut into pieces approximately thirty centimeters long. You will need about nine of these pieces.
Color pipes acrylic paint golden color. It is necessary to paint in several layers. Allow each layer to dry for about twenty minutes before applying a new one.
Top painted surfaces process protective varnish. This makes it resistant to water.
The pipes are secured with an adhesive gun. The glue will set quickly, so everything must be done without delay.
Polyurethane mats for the bathroom, they are folded in half and cuts are made in them along the perforations. The length of the cuts is approximately five centimeters.
The rug is rolled up and a kind of bud is obtained.
Such rolls with buds are inserted into pipes. They should fit tightly. In this case, additional fastening will not be necessary.
The result is an original ottoman that will look great in the bathroom.
Ottoman made from plastic bottles. Step-by-step instruction
Let's look at a master class on how to make an ottoman out of bottles with your own hands.
Bottles first connect using tape into a round piece.
From cardboard of sufficient density and thickness, cut out circles of the required diameter. This will be the seat and bottom of the pouf.
The bottles are connected to the cardboards with tape.
The surface of the resulting frame is covered padding polyester or foam rubber.
Two circles and a rectangle are cut out of the fabric. The cover is partially sewn on a machine, then put on the structure and finished off by hand.
The top and sides are knitted from pile yarn, and fabric is used for the bottom.
All parts of the decorative cover are connected manually.
You can make an ottoman for your home with your own hands, even using different materials and techniques: crocheted or knitted, sewn from improvised materials or even from an old sweater.
Our review presents interesting master classes how to make an ottoman for a hall or hallway and non-standard ideas for using the product in the interior. So, let's find out how to create a stylish piece of furniture step by step and what you need for this.
There are many fillers for making frameless furniture. Each material has its own characteristics and features. 
If synthetic materials are not suitable, you should choose natural ones:
- Wood sawdust and shavings from waste cedar and pine. The raw material repels pests and has therapeutic effect, but it needs to be changed periodically.
- Pooh presents is a light filler.
- Buckwheat husk is popular. This filling allows you to create comfortable furniture.
To the benefits natural fillers It is worth mentioning the absence of harmful chemical components.
Synthetic materials are also used as fillers:
- Expanded polystyrene looks like small balls. Elastic granules allow you to create additional volume.
- Holofiber is a lightweight filler. It allows you to get upholstered furniture.
- Polyurethane foam is an elastic material that does not provoke allergies.
ADVICE: The filler can also be an old blanket, pillow or rag.
Products filled with balls can be used outdoors, because the material does not absorb moisture. For creation items furniture improvised means are also used. Original materials include cereals, legumes, dry grass and cotton wool. There are a large number of options for furniture fillers
Knitted square ottoman
Let's find out how to make a knitted ottoman with your own hands. Yarn furniture self made – original solution for the interior and a soft object for a comfortable pastime. The stylish item looks like a sample from a store.
To make a soft ottoman with your own hands, you need to knit six squares of wool of the same size. Knitting is done by crochet. The “sampler” texture and bobble screeds are used. You can watch the knitting method in the video.
ADVICE: Such a pouf is suitable as an addition to an ottoman, as well as as an item for decorating bedrooms and living rooms.
- Lyon brand yarn, 450 grams, gray– 5 skeins;
- needles for creating tapestries;
- crochet hook, size 6.5 mm;
- pouffe filling;
- special fibers and foam;
- plastic bags.
Step-by-step instruction:
- Connect the squares using seams. To do this you will need a double thick thread.
- You can check the shape of the product on the box.
- Filling a piece of furniture. To strengthen the product, it is worth using materials such as plastic bags, foam or newspaper.
ADVICE: To prevent the filling from penetrating through the knitted pattern, it is recommended to place a pillowcase or soft lining inside.
Once filled, connect the two remaining sides. The yarn product is ready for use.
Master class from an old sweater
Let's figure out how to make an ottoman with your own hands from an old sweater. The lower part of the clothing can be used to decorate the upper surface of the product. Even when cutting off the sleeves, unsightly seams will not appear.
Assembly technology:
- Turn the sweater inside out and cut a circle at the collar.
- Sew up the arm holes with strong threads.
- Then turn the product inside out.
- The bottom should be slightly rounded.
- Place a special polyester lining inside the sweater. Then cut out two circles and connect these elements.
- The product must be filled with soft filler.
TOTAL: After stuffing the pouf, you should sew up the hole. The decorative product has many uses for the home. This perfect solution for home interior decoration.
Crochet an ottoman
You can knit a round pouf with your own hands. To knit a product with a diameter of 50 cm you will need 2-3 balls of Bobbin yarn. Detailed description shown in the photo below.
But the knitting technology is as follows:
- First a basket or bag is knitted
- Filled with filler
- And then the “lid” is knitted separately and sewn to the base of the ottoman
How to sew an ottoman bag with your own hands: photos and ideas
You can make an interesting product for your child. A DIY ottoman bag is suitable for creating a cozy place to spend your leisure time.
A soft piece of furniture can be made from two pieces of fabric, bean pellet filling and a zipper. Like option Not suitable for small children, as filler granules may fall out of the unzipped zipper. There is a danger of the child choking. If necessary, the zipper can be sewn up.
IDEA the fact is that we sew like a bag - BUT we sew the OPPOSITE corners and get the design as in the photo
Master class: how to sew a fabric ottoman
Universal products can be made from fabric. This provides additional seating and leg rest space. In this master class you will learn how to make a round ottoman with your own hands.
For manufacturing you will need the following components:
- 1.25 meters of thick woolen fabric;
- lightning;
- scissors;
- measuring tape;
- sewing pins;
- a piece of leather;
- filler;
- sewing machine.
The process of creating ottomans
- Cut out a circle (46 cm), a rectangle (length 142 cm, width 40) and a square (side 48 cm).
- Cut the square into two parts.
- Sew a zipper to both sides. The zipper should connect the two halves.
- Then cut out a circle from the square using a ready-made template.
- Fold the rectangle in half along the short side.
- After that this part need to be sewn to one circle and then to another.
- From a strip of leather can you make a handle.
- Additionally, buttons are attached to the leather strap.
You can use polystyrene beans as a filler. Foam or polyester is also used. It is recommended to sew the zipper together before use. This DIY round ottoman is ready to use.
Ottoman-banquette in the hallway for shoes
To create an ottoman for the hallway with your own hands, you will need two drawers and some other materials. Such a product is not only practical, but also functional. You can install shelves inside and put shoes or things there.
You will need the following components:
- two wooden boxes;
- batting and foam for drapery;
- fasteners;
- sheet and burlap;
- special paint;
- wood plank;
- wood glue;
- tools;
- brush;
- stapler
To make an ottoman in the hallway with your own hands, you need to follow these steps:
- The boxes are glued along the long side.
- A bar is attached to the bottom where the rollers can be attached.
- Then foam and batting are fixed to the top surface.
- The burlap is sewn together with the sheet. The sheet acts as a lining.
- The box is coated with special paint. If desired, you can apply an aging effect.
- The cover fits over the drawers.
You can make other ottomans from boxes with your own hands, the photo demonstrates original options. One option involves opening the drawers, inside which you can place shelves for shoes. And on top there is a soft pillow with filling.
- A practical option can be made from one box. First, the box needs to be sanded and painted with spray paint. Filler is laid on the plywood, and fabric is laid on top.
- The material is fixed with reverse side stapler. Z
- The plywood is then attached to the surface of the box. You can attach rollers at the bottom.
How to make an ottoman from a stool
When deciding which ottoman you can make with your own hands from available materials, it’s worth trying. For creative manipulations you will need an old stool.
Let's start assembling:
- Disassemble the chair and remove the seat.
- Cut out the blanks. Circle in plywood and foam.
- Use glue to attach the foam to the board.
- Put a fur cover on top and secure the ends with a stapler.
- Assemble the chair.
It is necessary to let the chair stand for at least a day for the glue to harden. The fur needs to be combed.
Detailed in this article.
Ideas for ottomans using improvised materials
Let's consider options for ottomans with original design. Common objects, bottles, tires and rags serve as filler and frame.
Bottles
Unusual creation option DIY ottoman from plastic bottles . Bottles need to be secured in round shape and secure them with tape. The bottom and top of the product are made from cardboard.
The bases are made from foam. They are fixed with tape. The cover is made of beautiful fabric. You can see the design made from bottles at photo. A similar item is suitable for decorating a living room.
Tires
Interesting models can be made from tires. How to make an ottoman depends on the availability of available materials and skill. The tires need to be fastened together. A material similar to foam rubber is placed inside. The holes are then covered with thin boards. A soft base is mounted on top and a cover is put on. To decorate the structure you need to use dense fabrics.
Ottomans for children
To make an ottoman with your own hands, you can use drawings and diagrams. Bright and colorful fabrics are used to make products. Try these options:
- The model, made of two pieces of material, looks interesting. different color. Plain fabric can be used at the bottom.
- A wonderful solution is square-shaped structures.
- An original composition can be achieved by using fabrics of different colors.
- Children will love the cone-shaped ottoman.
- You can even sleep on a long ottoman. To make it you will need flat pillows and a long blanket. The pillows are placed in a fabric cover and secured in place.
Ottoman in the interior with different designs
The choice of ottoman option largely depends on the type of room. For the hallway, you should choose frame models with a rigid base. Cylindrical designs help smooth out the angularity of the room. For comfortable rest In the living room, models with soft upholstery are suitable. To create an accent, you should choose a product made from a material with a bright color palette.
Round poufs – perfect option for small spaces. Rectangular ones are recommended to be placed near armchairs and sofas. The product for the kitchen must be made of moisture-resistant fabrics. For a child's room, you need to choose safe, comfortable and soft models.
We hope that our master classes will help you figure out in detail how to make an ottoman yourself from simple materials. Homemade products will add comfort and coziness to any room. Original seats are suitable for different interiors.
Photo: apairandasparediy.com
You will need:
- thick fabric(V in this case a textile mat about 2 m long was used);
- burlap;
- a pillow of the appropriate size with a “ball” filler (made of polystyrene balls);
- pins, scissors, sewing machine and thread.
Photo: apairandasparediy.com
1. Based on the size of the pillow, draw out 5 parts on thick fabric: 1 square for the top and 4 rectangular sides.
Photo: apairandasparediy.com
2. Cut out the pieces.
Photo: apairandasparediy.com
3. Cut another square piece from the burlap fabric.
Photo: apairandasparediy.com
4. Pin the pieces together.
Photo: apairandasparediy.com
5. Sew the details from the wrong side, leaving one side free. Turn the product inside out.
Photo: apairandasparediy.com
6. Place a pillow inside and sew the pouf by hand.
Photo: apairandasparediy.com
Options for rectangular poufs:
Photo: homedit.com
Photo: prettyhandygirl.com
Photo: ozonesauna. club
Cylinder pouf with stencil design: master class
The main highlight of this piece of furniture is the ornament. To apply it, select a stencil with a design you like from an artist store. By the way, the same stencil can be used to apply a pattern to other interior items to create an ensemble. For example, you can also decorate with a pattern decorative pillow, bedspread, curtains or make a picture and hang it in a frame on the wall.
Photo: nomadicdecorator.com
You will need:
- thick fabric for the pouf;
- a pillow of the appropriate size and shape with a “ball” filler (you can also use a pillow with foam rubber or other dense filler);
- stencil, acrylic paint for fabric, wide flat brush or sponge for applying paint;
- scissors, sewing machine, thread.
1. Prepare a pattern: two circles for the base and top of the pouf, plus a rectangular cloth with a length equal to the circumference of the base of the circle and a width corresponding to the desired height of the future pouf. Cut the fabric, not forgetting the seam allowances.
Photo: nomadicdecorator.com
2. While attaching the stencil to the fabric, use a brush or sponge to apply the design with acrylic paint.
Photo: nomadicdecorator.com
3. Sew the rectangle piece to one of the circle pieces, sew the side seam, turn it inside out. Place the pillow inside and sew the second circle.
Photo: nomadicdecorator.com
Options for cylindrical poufs:
Photo: twindragonflydesign.com
Photo: homedesignlover.com
Photo: decoist.com
: Master Class
Options for painted poufs:
Photo: hgtvhome.sndimg.com
Photo: stripesandpolkadotsblog.com
Photo: homeyou.com
Printing on fabric:
Crocheted round pouf: master class
This pouf is best knitted from fairly thick yarn, for example, knitted yarn.You will need:
- knitted or other thick yarn;
- a hook of a suitable size;
- round pillow.
If you know how to crochet simple double crochets, crocheting such a pouf will not be difficult for you:
Options for knitted poufs:
Photo: decoratingyoursmallspace.com
Photo: northsalt.wordpress.com
Photo: ktandthesquid.com
Large pouf chair: master class
This pouf is sewn very simply, and it produces a large, soft, comfortable seat, actually an armchair.
Photo: creativeoutpour.com
You will need:
- thick fabric;
- Velcro tape;
- sewing machine, threads;
- material for filling the pouf - unnecessary padding polyester pillows, old clothes cut into ribbons or shreds, and so on, plus plastic bags.
1. Make a pattern: 2 large squares for the top and bottom of the pouf and 4 rectangles for the sides. Cut the fabric, not forgetting the seam allowances.
Photo: creativeoutpour.com
2. Pin the pieces and sew them on a machine, leaving an opening of about 20 cm.
Photo: creativeoutpour.com
3. Turn the pouf inside out. Fold the edges of the fabric of the hole inward, pin and sew on Velcro.
Photo: creativeoutpour.com
4. Fill plastic bags lightly with filler. Then place them in the pouf - in sufficient quantity so that it retains its shape, but is not too hard.
Photo: creativeoutpour.com
Pouf-chair options:
Photo: somuchtomake.com
Photo: cooldiys.com
Photo: vasti-fernandes.blogspot.com
It's nice to have this soft and comfortable object called an ottoman in your apartment or house. Today we decided to introduce you to another interesting and extraordinary lesson called DIY bucket ottoman.
Materials:
- plastic bucket;
- textile;
- rope;
- construction stapler;
- glue gun;
- foam;
- scissors;
- buttons;
- sharp knife.
Let's glue the bucket
We remove the handle from the bucket and begin the long, but important process decor of the base for our ottoman, that is, a bucket. We take a thick rope that resembles a rope and using a glue gun, glue it in a circle with hot glue.
The inverted bucket in our case has a ribbed surface at the bottom. On one side we used a little more rope, but on the other we ended up with a kind of protrusion and the ottoman seemed to expand towards the bottom. So from a design point of view, we coped with the task perfectly.
Main! When you wrap a rope around a bucket and you run out of rope, try to glue all the ends on one side! Such places are clearly visible and if they are all on one side, then they can be easily hidden by turning the pouf in the opposite direction.
Pillow base
After the bucket is completely covered with rope, you can proceed to making the top soft pillow. For this we need cardboard, a pencil or marker and scissors. We turn the bucket over, trace the outline of the bucket and cut out the base for the pillow from cardboard. Then we place the resulting cardboard blank on the fabric and, adding 10 cm to the outer radius, trace the fabric in a circle with small strokes.
Attaching the button
Afterwards, take a button and attach a bolt to it. You can simply use a button and thread, but we have a button lying around like the one in the photo, with a thread at the end. We determine the center in the cardboard base and fabric and, having made holes there, insert the button into the cardboard and fabric. Then we need to find a few unnecessary towels, or any other soft fabric that we can use to replace the foam, or buy foam and cut it according to the required dimensions.
We twist the towel into a tube, wrap one end tightly around the button, and glue the other with hot glue. We repeat the procedure until the surface of the base is completely covered with towels.
Nailing the fabric to the craton
We straighten the fabric, press the edges and, turning the resulting pillow over, simply nail the fabric to the cardboard with a construction stapler.
Covering the bottom of the pillow
Now we need to cover the bottom of the cardboard with fabric. To do this, we cut out another cardboard blank, which will be slightly smaller in diameter than the pillow. Trace the fabric according to the template and cut it out. Glue the resulting fabric circle using hot glue.
Cushion fasteners
To prevent our pillow from fidgeting and falling off the base of the ottoman, we use special self-adhesive fasteners, which can be found in a fabric store. First, we attach them to the upper, uncovered part of the bucket, then we sew them to the pillow.
The ottoman is ready
That's all, we put the pillow on the bucket and get a completed, beautiful ottoman. If you make several pillows, you can also change them depending on your mood and the situation in the apartment.
Interesting video:
Another, simpler and interesting option how to make an ottoman from a bucket.