What can be done from the old bath in the country: an original flowerbed, a small pond, a cozy sofa (37 photos). Unusual and useful ideas for giving from an old cast-iron bathtub. Warm high bed.

If the old bathroom has served its time, do not rush to throw it in a landfill or put it in scrap metal, you can make a rather original and creative sofa out of it yourself. Such a sofa can become an adornment of any home, starting with an apartment and ending with a country house, it also fits well into the interior of various salons and offices for the provision of services.

An old cast-iron or metal bathtub is suitable for making such a sofa, although it is better to prefer a cast-iron one, it has good stability and original shape, especially if it is an old model. Making a sofa out of the bathtub is quite simple, all you need is an old bathtub, an angle grinder (grinder) with metal cutting wheels and grinding tips, enamel paints for painting the bathtub and foam rubber with fabric for seating and pillows.

Having removed the legs, we clean off damaged and exfoliated areas of paint and enamel.

Having laid the bath, on the side we will draw the alleged shape of the sofa frame, it all depends on the wishes and your own fantasies. The cut lines can be flat, oblique, circular, semicircular, etc.

Cutting is done by a grinder and do not forget about personal protective equipment.

Having cut out the excess part of the bath, we grind the cut line from the burrs and make it more rounded. You can paint with any paints intended for a metal base, these are all kinds of enamels, nitro paints, spray paints and the like.

The legs in such bathrooms are overhead self-tightening under the weight, they must be cleaned, painted and put on in the groove inserts. In cases of their absence, you can weld the necessary frame from pipes or elbows and install in it, you can also make supports from stone or wooden beams.

Making a seat is a fairly simple job, we take a foam rubber of suitable thickness and cut out the necessary shape from it.

We wrap the cut foam blank with a synthetic winterizer or spandbond.

Then we cover with a cloth, if possible and if desired, you can sew a cover and insert foam rubber into it.

Pillows for the back and side armrests can be sewn on their own or purchased ready-made in the store suitable in color and size.

Here you see that the base of the seat is made of wooden planks, which in turn can be covered with a plaid, bedspread or soft blanket.

In this embodiment, the entire inside is glued with foam and a one-piece cover is sewn.

The false back and head restraints will give a business look to such a sofa.

The right combination of colors and colors will betray sofas of unique glamor.

Cutting the bath in half, we get two original and rather comfortable chairs, which will be a spectacular addition to your sofa, made from an old bathtub with your own hands. Requirements for the top casino rating of 2019 are here http://www.wowmagic.ru/kazino-zerkalo/top-rejting-onlajn-kazino/ How to choose the top casino?

Do it yourself


Do-it-yourself door trim
After major repairs, a lot of old building material remains in the house, including wooden doors. We offer one of the options how to beat the door with your own hands ....


How to make a sofa
Making a sofa independently is within the power of every person, even with minimal skills in carpentry, a little ability to use a building tool and ...

When the long-awaited major repairs occur in the apartment, many are driven by a common desire - to get rid of old things in the house as soon as possible, as a result of which most of them begin to safely move to the balcony, to the garage or to the country house. When it comes to repairing the bathroom, the urgent question arises - what to do with the old cast-iron bathtub? She has been serving regularly for so many years that it’s a pity to throw her away and keep such a heavy, bulky attribute of plumbing and there is no need and place. The ideas in this article will help solve this problem, showing how you can make the so-called upgrade and give new life to the old bath.

Small ponds and ponds are always in perfect harmony with the landscape design of the cottage area. To build a small pond on your own is not difficult if you have an old bath. Such a pond will look most natural if the bath is almost completely buried in the ground. In the place where it is planned to organize the pond, it is necessary to make a marking based on the size of the bathtub, dig a hole corresponding to its parameters. Next, plug the side and bottom drain holes with a wooden plug wrapped in cloth. Inside, it is better to paint the bathtub in black so that the bottom of the bathtub does not shine with unnatural whiteness. However, if you do not plan to periodically drain water from the pond and clean the surface of the bath, then after a certain amount of time, the bath itself will take on a natural look due to adhering dirt, plant debris and insect waste products. And here are some more ways.

Around the pond, you can lay out stones, plant such plants as a loosestrife, bluebells, iris, ferns, incense. You can also decorate the pond with lanterns and various figures of animals and birds.

A cozy sofa to give from the old bath

With some effort and creativity, you can turn an old bathtub into a stylish and original sofa. It can be put both in the most suburban area, and in the house. To realize this idea, it is necessary to outline a cut line on one of the sides of the bathtub and remove the excess part by the grinder. The edges should be smoothed and then painted the bathtub outside and inside in any colors you like, suitable for the interior of the room. After painting on the trimmed edges, fix the edging. On the legs with liquid nails, glue decorative overlays. A mattress and pillows are laid at the bottom of the bathroom. The sofa is ready.

Beautiful flowerbed from an old bath

To make an excellent flowerbed for flowers from an old bath is not difficult. In addition, she is almost ready. You can bury the bath completely in the ground, as is the case with the pond, then fill it with earth and plant the plants. And you can leave the bath to stand on its legs or dig only the legs into the ground. At the same time, the bath should be painted outside and you can even turn on your entire imagination and paint the bath with beautiful patterns. Also, for the purpose of decor, you can lay out a mosaic on the outside of the bathtub from chipped tile. And a few more ideas for your summer cottage.

Old bathtub as a water storage for irrigation

Many summer residents use the old bathtub as a container for storing water in the country. But in order to prevent the old bath from spoiling the appearance of the summer cottage, you can easily make a funny cow out of it like in the photo, which will give a smile and a good mood to all family members and neighbors. Such an excellent cow can also be used as a mini pool for children.


On the whole, you can breathe new life into any old thing, realize it in another form, use it for another purpose. An old bathtub is an excellent material for creating truly amazing and most importantly functional decor elements for a summer cottage, whether it be a picturesque flower bed, a quiet pond in the thickets of plants, a stylish sofa, an original water storage tank or even a mini pool.

Elvira Goleva for the site

An old cast-iron bath is a valuable item, so throwing it away or scrapping it is not the most sensible thing. Experienced gardeners take the cup to the cottage and build useful things from the farm out of it. A few examples of the use of the font will be useful to beginner gardeners.

Why not throw away your old bathtub

Cast iron fonts are extremely practical products, the service life of which is at least 50 years. The material resists corrosion, thanks to a special protective film it easily tolerates temperature fluctuations, does not emit harmful substances into the soil.

When the enamel layer is snapped off, the defect area is cleaned and covered with acrylic paint.

Here are a few advantages of cast iron fonts:

  • spaciousness;
  • high degree of tightness (if plugging holes);
  • high sides;
  • the presence of holes.

And now about how to use the bath in the country.

Country furniture

Smooth shapes of the walls and the bottom - a ready-made frame for the construction of chairs, sofas. From one bowl get 3 pieces of furniture - a pair of chairs and a table. There will be only one sofa.

They do this:

  • mark out three equal transverse cuts across the entire horizontal;
  • extreme pieces with walls and a transverse jumper - chairs;
  • the middle one is a table (turn over and put on the walls).

The edges are polished, the seat is equipped with a warm mattress or pillows - done. Exterior decor to the taste of the owner - staining, mosaic. To make a sofa, one large wall is cut out, leaving the other three walls. The cuts are also ground; a soft litter is made on the seat.

To prevent the bathtub legs from pushing through the soil or wooden floors, thick pieces of rubber cork are put on them.

Flower garden

The most difficult thing is to choose the place of the future flowerbed, the rest will take just a couple of minutes:

  • plug the bottom;
  • lay out a layer of coarse pebbles;
  • pour some sand;
  • fill the bath with soil;
  • plant flowers.

All is ready. The outer planes are decorated with broken tiles, with stones - fixing to the moment glue. The walls are painted, painted and even made a “slide” - they put flower pots on the soil so that they grow to the edge of the bathtub and cover the external walls.

On a limited area of \u200b\u200bthe site, a multi-tier flowerbed is built in the bathroom. They put the frame with the shelves, pull the film and set the boxes with flowers. The soil in the bowl is the first level, the rest are raised with shelves to the desired height.

If you install a bathtub in the corner of the garden adjoining the wall, start up a cascading fountain - the relaxation area will make you forget about gardening forever.

Water tank

Fill the drain and overflow holes, fill the bowl and let stand in the sun. Warm water is much better for irrigation than cold. Plants do not experience stress from temperature changes, soft settled moisture will not burn young bushes of crops. So that the device does not look too defiant, the sides are painted, tightened with a film or decorated otherwise.

When choosing a color, dark shades are preferred - they conduct heat better, the water heats up faster.

Warm high bed

Sore back and knees do not allow you to stand on the beds for a long time - take a bath. To make a high warm bed for any crops, take:

  • almost a whole bath (old ones with a chipped enamel layer are perfect);
  • paint the walls with dark paint;
  • do not plug the drain and make a couple more holes in the bottom (an impact drill will come in handy);
  • a pebble layer is thrown on the bottom;
  • a layer of sand is poured onto the pebbles, leveled;
  • lay out a layer of old newspapers, compost or even an artificial palace - the insulation is ready;
  • pour nutrient soil.

Any crops are planted - on such soil even capricious eggplants will quickly grow. The high sides of the bathtub allow you to care for plants without tilting.

To get rid of weeds, the surface of the bed is mulched with newspapers, straw. The coating will not miss the weeds, but will not interfere with the growth of zucchini, tomatoes, etc.

Greenhouse

A high bed from the bath is covered with a frame of twigs and a film is pulled - the greenhouse for cucumbers is ready. The frame is made of the desired height, instead of the film they take lutrasil. The membrane will provide ventilation, but will not let cold air in to the plants. Cucumbers grow especially well in such hotbeds.

Pool or pond

Of course, a large pool will not work out of the bath, but the kids will be happy to splash in the warm water in the fresh air. The principle of the construction of the pool or pond is the same:

  1. Dig a hole of the right depth. Sand is poured at the bottom - this is so that the bathtub is tight and does not stagger.
  2. The bath is lowered into the pit, the gaps between the walls of the tank and the plumb lines are filled with earth.

Now, water is being drawn into the font for the pool - pulling the hose through the overflow hole. To build a pond, flowers in pots are lowered to the bottom, fountains are erected, etc. The visible surfaces and the soil around the bowl are also decorated in any chosen way.

The depth of the pit depends on the height of the sides of the font and the desire of the owner. The standard is deemed to be 2/3 of the wall height.

And more options for using the bath in the country:

  • container for bulk building materials;
  • a table with a wardrobe - they put a lid on the bathtub, put everything under it for tea drinking, marinade or something else;
  • grill - a grill is installed on the sides, a fire is made under it;
  • container for storing inventory, compost bookmarks, etc.

To build a multi-tiered furnace, the font is placed on the side wall (short). Now the container is marked, in the lower part there is a firebox, and in the middle part there is a barbecue or stove for cooking dinner.

The cottage is a great place for relaxation, active pastime and the realization of creative imagination. Here you can bring a lot of unnecessary things in the apartment and give them a new unique "image".

From the old bath you can make a huge number of original designs that are useful not only in the household, but also in the garden. So you can build from it a pond, an alpine hill, an unusual sofa, flower bed, etc. The main thing is to be patient and apply maximum imagination.

Pond in the country from the bath

An artificial pond from an old cast-iron bathtub is a wonderful way to decorate a summer cottage. It brings a special harmony to the general atmosphere, allows you to use the most unusual elements for decoration.

Features:

  • a pond created from an old bathtub is quickly and easily installed;
  • doing its construction does not need to use expensive building materials;
  • water plants, stones, fish, etc .;
  • water in the tank does not change, but simply topped up as needed;
  • in winter, the pond is left in the same form, without covering with a film.

Where to place:

  • choose a dry area with strong soil;
  • give preference to a place where there is a shadow and sunlight;
  • the best area for the pond is next to the trees.

Installation of a bath in a summer cottage as a reservoir

1. The first thing to do is dig a pit. The depth of the pit should be slightly larger than the size of the tank (approximately 30-40 cm).

2. Then around the excavation we remove the sod (for the same 30-40 cm). Ground removal width - 0.5 m.

5. We breed tile glue, process it with the inner surface of the bath. The solution can not be aligned - so the bottom of the pond will look more natural.

6. Leave the container to dry well for about a day.

7. Take the netting and cut it into pieces. We close the upper perimeter of the bathtub, wall (1/3).

8. At the corners of the grid, we fix the wire rings. They should protrude perpendicular to the walls of the bath.

9. We dilute the cement mortar, process it with a mesh. We place rubble or small stones on top.

10. Put dry clay on the bottom of the bath with a layer of 5 cm. Pour water. The solution should be transformed into a semi-liquid (creamy) mass. With this composition, we coat the walls of the bath.

11. Dry the clay for several hours. Then we proceed to the gulf of water (the stream should run in a small stream).

12. Pick up a couple of buckets of sludge from a natural reservoir and pour into the bathroom.

13. Plant plants along the perimeter of the pond, arrange large stones.

Notes:

  • water in the pond does not change, but is only added as necessary;
  • before freezing, put a couple of plastic bottles filled with half water in the pond - they will not allow the pond to freeze and ruin the walls of the bath;
  • if you don’t want to bother, leave the bathtub in the garden or next to the patio. Decorate it with bright paint, fill it with water, plant pond plants at the bottom (they can be placed in containers).

Bath in the garden as an alpine slide

Working process:

1. Take an old bath and beat off a smooth surface. This can be done using an electric drill with a nozzle in the form of a disk.

2. Coat the container with paint or glue, and apply a mixture of sand, cement and peat (1 cm thick) on top.

3. Let the product dry well.

4. After all activities, proceed with planting.

Notes:

To give the hill a natural look, coat the bath walls with rice broth or kefir - this will accelerate the development of moss and algae.

Flowerbed from the bath

Basic principles:

  • it is recommended to prepare the soil for the flowerbed in advance;
  • always watch for drainage, fertilize plants with humus;
  • a flower bed must be planted with plants with a different flowering period - so it will delight the eye for a whole season;
  • place tall plants closer to the center, and lower at the edges;
  • pick flowers should be the color of buds and foliage.

How to make a flower bed from a bathtub?

1. Paint the bath in green, gray, black or any other bright color.

2. Fill it with fertile soil.

3. Plant plants (mid-tall or tall, curly at the edges).

Notes:

  • if the bath is half buried, the result is an original low flowerbed;
  • if it will stand on its legs, decorate the facade with stones, pieces of tile, apply a bright image.

Sofa for a summer cottage

Working process:

1. Mark a cut line on one side of the bathtub.

2. Use a grinder to remove the unnecessary part.

3. Treat the edges of the bath with a special tool that will smooth out irregularities and sharp corners.

4. Paint the product (outside).

5. Using liquid nails, install decorative overlays on the legs, fasten the edging to the trimmed edges.

6. At the bottom of the bath, lay the mattress, bright pillows.

Old bath in the country: photo

New life of old things: video

If the old bathroom has served its time, do not rush to throw it in a landfill or put it in scrap metal, you can make a rather original and creative sofa out of it yourself. Such a sofa can become an adornment of any home, starting with an apartment and ending with a country house, it also fits well into the interior of various salons and offices for the provision of services.

An old cast-iron or metal bathtub is suitable for making such a sofa, although it is better to prefer a cast-iron one, it has good stability and original shape, especially if it is an old model. Making a sofa out of the bathtub is quite simple, all you need is an old bathtub, an angle grinder (grinder) with metal cutting wheels and grinding tips, enamel paints for painting the bathtub and foam rubber with fabric for seating and pillows.

Having removed the legs, we clean off damaged and exfoliated areas of paint and enamel.

Having laid the bath, on the side we will draw the alleged shape of the sofa frame, it all depends on the wishes and your own fantasies. The cut lines can be flat, oblique, circular, semicircular, etc.

Cutting is done by a grinder and do not forget about personal protective equipment.

Having cut out the excess part of the bath, we grind the cut line from the burrs and make it more rounded. You can paint with any paints intended for a metal base, these are all kinds of enamels, nitro paints, spray paints and the like.

The legs in such bathrooms are overhead self-tightening under the weight, they must be cleaned, painted and put on in the groove inserts. In cases of their absence, you can weld the necessary frame from pipes or elbows and install in it, you can also make supports from stone or wooden beams.

Making a seat is a fairly simple job, we take a foam rubber of suitable thickness and cut out the necessary shape from it.

We wrap the cut foam blank with a synthetic winterizer or spandbond.

Then we cover with a cloth, if possible and if desired, you can sew a cover and insert foam rubber into it.

Pillows for the back and side armrests can be sewn on their own or purchased ready-made in the store suitable in color and size.

Here you see that the base of the seat is made of wooden planks, which in turn can be covered with a plaid, bedspread or soft blanket.

In this embodiment, the entire inside is glued with foam and a one-piece cover is sewn.

The false back and head restraints will give a business look to such a sofa.

The right combination of colors and colors will betray sofas of unique glamor.

Cutting the bath in half, we get two original and rather comfortable chairs, which will be a spectacular addition to your sofa, made from an old bathtub with your own hands.