Amplipulse therapy effect on the body. Amplipulse therapy as a type of physiotherapy for diseases of the musculoskeletal system. Operating modes of Amplipulse devices

Physiotherapy takes part in all therapeutic activities. In some cases they are used as an auxiliary therapy, in others they are used as the main one. This is especially true for the treatment of the spine and its pathologies, where medications are only an addition to physical therapy. Amplipulse therapy is one of the types of such procedures; its operating principle is based on current fluctuations. These vibrations are generated by a special device that is connected to the patient.

The indications and contraindications for amplipulse therapy are varied, so before using such treatment, you need to familiarize yourself with the main ones and inform the specialist if there are contraindications. The technique has been used for a long time and is well tolerated even by small patients, so amplipulse therapy techniques are irreplaceable in pediatrics.

The principle of the procedure is simple and familiar to many since childhood. A special device is equipped with electrodes that are attached to the affected area of the body. After fastening, modular current is supplied. The current strength increases gradually until the patient begins to feel a slight tingling sensation on the skin where the electrodes are placed. Course treatment: from 7 to 15 procedures. If necessary, therapy is repeated, but with a short break in time.

The amplipulse therapy technique allows you to painlessly affect the affected tissues, reduce swelling and inflammatory processes. This reduces pain and reduces the severity of symptoms.

Amplipulse therapy is indicated for those who suffer from exacerbations of neuralgia, neuritis and neuroses. The procedure is prescribed to patients who have noticed muscle tissue atrophy as a result of prolonged immobility. The technique allows you to remove small particles of stones in the presence of urolithiasis.

A number of other diseases have indications for amplipulse therapy:

diseases of the respiratory system: pneumonia, pleurisy, bronchitis;
diseases gastrointestinal tract: ulcers in the quiet phase, gastritis;
bronchial asthma;
urological diseases;
hypertension;
diseases of the musculoskeletal system;
ENT diseases;
paralysis of limbs.

Contraindications for amplipulse therapy

open or purulent wounds;
complex cardiovascular diseases;
presence of a tumor or adenoma;
temperature;
pregnancy;
open form of tuberculosis;
heart rate disorders: arrhythmia, angina, interruptions;
pacemaker;
varicose veins

Amplipulse therapy works well on fatty tissues and cells, which helps burn excess weight. A current of the required frequency acts on the cell and reduces it. In much the same way, current affects any cell of any organ. In this case, the body does not suffer any harm, unlike medications. Sometimes the effect of hardware therapy is enhanced by adding therapeutic drugs such as magnesium sulfate.

Expert opinion

Over time, pain and crunching in the back and joints can lead to dire consequences - local or complete restriction of movements in the joint and spine, even to the point of disability. People, taught by bitter experience, use natural remedy, which is recommended by orthopedist Bubnovsky... Read more"

For neurological diseases, such therapy is most useful. Impulse stimulates nerve cells, acting directly on the original source of the disease. This is necessary for people with chronic diseases, and simply for those who are often exposed to stress and nervous tension.

If blood circulation in the affected area is impaired, the impulse affects the neuromuscular tissue. This activates blood flow, blood supply is restored and this helps remove swelling. The current activates metabolic processes, starting them from the inside. Therefore, amplipulse therapy can be used for hormonal disorders, disruption of the menstrual cycle. Sometimes therapy is prescribed for problems with the thyroid gland.

The procedure is also prescribed for intestinal problems. The intestines are part of two important systems in the body: the immune and gastrointestinal tract. Often the cause of disorders of these systems are neurological and psychosomatic problems. Therapeutic effect the pulse technique is extremely pronounced in such cases.

Amplipulse therapy and osteochondrosis

Osteochondrosis always stands apart from other diseases because its treatment is multi-stage and complex. Relieving pain is the main task, since without this it is impossible to continue treatment. And often only amplipulse therapy techniques help reduce pain in the spinal column. At the same time, it accelerates the nutrition of cartilage tissue, helps regeneration and stimulates proper blood flow.

A little about secrets

Have you ever experienced constant back and joint pain? Judging by the fact that you are reading this article, you are already personally familiar with osteochondrosis, arthrosis and arthritis. Surely you have tried a bunch of medications, creams, ointments, injections, doctors and, apparently, none of the above has helped you... And there is an explanation for this: it is simply not profitable for pharmacists to sell a working product, since they will lose customers! Nevertheless, Chinese medicine has known the recipe for getting rid of these diseases for thousands of years, and it is simple and clear. Read more"

Due to its capabilities, therapy provides excellent effects:

increases neurostimulation of cells;
eliminates swelling;
affects blood flow;
dilates blood vessels;
activates the motor center;
provides long-lasting pain relief.

Restoring the spine is impossible without physiotherapy. Osteochondrosis is difficult to treat with medications. And only a complex of physical procedures allows achieving stable remission.

Operating principle of the devices

Amplipulse 4 and 5 devices are used for treatment. There are some devices that can be used at home. The only negative: large restrictions on use. Because of this, they cannot be used at full capacity.
The amplipulse therapy technique is designed to affect the human body. The differences between the devices are in the spectrum and strength of the effect achieved.

The most powerful device in terms of effect is Amplipulse 5, which acts on diseases:

chronic lymphostasis of the extremities;
disturbances in liver function;
gastritis, ulcer, tuberculosis;
vascular diseases.

Unlike its predecessor, Amplipulse 5 has a wide range of current frequencies. This allows you to configure the device as accurately as possible, selecting the desired value for the patient. Treatment is usually carried out at different frequencies and in different series of current applications. Not every device allows this, but Amplipulse is an exception.

Its capabilities:

a series of oscillations, and the model allows you to automatically pause;
series of oscillations, where modulated ones alternate with unmodulated ones of a given frequency;
intermittent oscillations taking into account the required pause.

Amplipulse therapy is a method of physiotherapeutic treatment in which the patient’s body is exposed to low-power alternating sinusoidal currents. The device that emits these low power currents is called an “Amplipulse”.

Carrying out such a procedure is justified in case of spinal hernia, osteochondrosis and spondylosis, and scoliotic disease. This physiotherapy procedure is extremely effective and useful, but only for early stages the listed diseases.

1 General description of the procedure and effects on the human body

Bone and joint diseases are effectively treated using various physiotherapeutic procedures, which include amplipulse therapy. The principle of operation of the technique is based on the therapeutic effect of sinusoidal modular currents on the tissues involved in pathology.

The technique involves the use of only low-frequency currents, which are absolutely safe for humans (allowed for children too). During the procedure, low-frequency current acts on pathological lesions at intervals (with stop intervals).

To put it simply, amplipulse therapy is a type of electrical tissue stimulation. The procedure is performed using a special physiotherapeutic device – Amplipulse. The device and the technique itself are not new - they were successfully used back in the last century.

But what does this procedure give? Firstly, it eliminates muscle spasms. Secondly, it enhances regional blood circulation and enhances the drainage of lymphatic fluid, preventing the occurrence of edema.

It also has an analgesic effect and, when exposed to a large area (for example, the entire back), a sedative effect (calming the patient, improving his sleep).

1.1 Indications for amplipulse therapy

Amplipulse therapy has enough a large number of indications. For each disease that this procedure treats, its own electric shock algorithm is used. For some diseases, short-term, low-power effects are used, while for others, on the contrary, long-term and high-power effects are used.

Main indications for amplipulse therapy:

All types and localizations of spinal osteochondrosis.
Radiculitis (including advanced-complicated).
Rheumatoid arthritis and different kinds arthrosis.
Intervertebral hernias (single and multiple, without restrictions on their size).
Periarthritis.
To enhance the regenerative capabilities of the body in case of closed bone fractures.
Back deformities, curvatures and asymmetries spinal column(due to scoliosis, spondylolisthesis, pathological lordosis/kyphosis).
Compression (squeezing) of nerve roots, but only in the form of symptomatic therapy.
Back muscle spasms.
Lymphatic fluid stasis.
Atherosclerotic vascular lesions.
Violations motor activity limbs (after strokes, in the presence of paralysis).

1.2 Contraindications

Amplipulse therapy is a fairly safe technique used in the treatment of both adults and children. However, this procedure is not without contraindications. Most contraindications to amplipulse therapy are relative, that is, they can be at least temporarily put into remission during the course of amplipulse therapy.

Contraindications to amplipulse therapy:

serious illnesses of cardio-vascular system(arrhythmias, heart failure, cicatricial lesions of the heart valves);
diseases of the blood and hematopoietic system (thrombophilia, leukemia, hemophilia);
the presence of thrombosis or thrombophlebitis (in the treatment of lower extremities);
spicy infectious diseases, including FLU and colds;
dermatological (including pustules) and hematological (skin and systemic vasculitis) diseases;
the procedure is contraindicated in the first 1-4 days after fractures (both open and closed), in the first days after muscle ruptures or strains;
pregnancy in any trimester;
malignant neoplasms of any organ;
varicose veins of the lower extremities;
high blood pressure;
presence of a pacemaker/pacemaker.

2 Carrying out the procedure

Before starting the procedure, the patient is asked to take either a lying or sitting position (which one depends on the underlying disease), after which he is asked to relax as much as possible. The procedure is performed while standing extremely rarely (as a rule, only in the treatment of urolithiasis).

Next, a group of electrodes is applied to the affected organ, through which low-frequency currents will pass. After applying and securing the electrodes, the device (amplipulse) is adjusted and then turned on at minimum power.

During the procedure, the power is gradually increased, usually until the patient feels a slight tingling or vibration in the area of the body where the electrodes are attached. Such symptoms indicate that the device has reached its maximum acceptable power.

The duration of the procedure is strictly individual, but usually it lasts no more than 20 minutes. In rare cases, several procedures may be required within one day, performed at intervals of 4-5 hours.

The classic course of amplipulse therapy involves 10-15 sessions. To enhance the effectiveness of treatment, it is recommended to combine amplipulse therapy with other physiotherapeutic techniques (for example, UHF treatment).

2.1 Preparation

No specific preparation is required for amplipulse therapy. Only general training is carried out on an outpatient basis. That is, all preparation is carried out at home, and the procedure itself is done in a hospital or clinic.

Basic Rules:

24 hours before amplipulse therapy, the patient is asked to stop taking any medications other than those necessary for health reasons.
It is advisable to exclude any foods that cause flatulence (increased gas formation in the intestines) the day before therapy.
A few hours before the procedure, you need to have a snack (no frills!) and take a shower.
It is recommended to take a bottle of water with you, since already during treatment it may turn out that not one, but several procedures are needed (and this may take several hours).

If 3-4 procedures are not enough to achieve results, then during subsequent treatment sessions all the same preparation rules are followed, except for one thing - the exclusion of medications. For long-term treatment, you can take any medicines both before and after each amplipulse therapy procedure.

SMT therapy, what it is, indications and contraindications for this treatment method are detailed in the article below.

To alleviate or eradicate pathologies associated with joints, a wide variety of methods are used, the most effective of which is physiotherapy.

The most popular procedure in this method is amplipulse therapy. Its essence is extremely simple, and consists in the action of a sinusoidal modular current at the site of a painful area of the body.

Such currents should only be low-frequency, which will protect a person and eliminate all possible negative aspects.

In this technique, the action of electric current occurs after each allotted period of time with the same pause time.

The name of this action is electrical stimulation, between which relaxation of the painful area begins and subsequent “electrical” sleep.

Amplipulse

For such treatment, you will need to use a device called “Amplipulse”, from which the name of this treatment method comes. It was released back in the Soviet period, in the 60s. Even then, its analgesic effect and positive effect on the diseased area of tissue was studied and proven.

On this moment there are a large number of different models under the numbers: 4, 5, 6, 7 and 8. The differences lie in individual characteristics application and functionality. The most applicable models are 4 and 5.

What is amplipulse therapy and how it works?

To use such a device, it is necessary to connect several electrodes, through which low-frequency electric current will subsequently be transmitted.

After the simultaneous passage of current through the electrodes, a pause time begins.

Each time, the current strength increases slightly, but in no case will it reach the critical limit.

With this electric current stimulation, some fibers in the human muscles begin to spontaneously contract. During this time, a person may feel slight vibrations, or less often, tingling sensations. The procedure does not cause severe pain.

Amplipulse therapy provides the body with the following benefits:

Improving blood supply to this area
Regenerative processes are activated
Increases muscle tone
Improves tissue nutrition

Cells affected by the disease, with the help of improved blood supply and nutrition, begin to recover. The inflammatory process is also reduced during amplipulse therapy.

A single procedure provides only an analgesic effect; several sessions will be required to completely get rid of the disease.

Amplipulse therapy for the treatment of joints and back

Amplipulse therapy is the most effective in treating diseases of the joints and bones compared to other methods. The main advantages are as follows:

Analgesic effect
Bone restoration
Improving blood supply to joints and bones
Elimination of muscle atrophy
Elimination of swelling and inflammation

Due to the fact that low frequency current is capable of deep penetration into skin, cell regeneration occurs, and in the affected areas the blood supply is normalized, and as a result, nutrition.

The muscle fibers surrounding bones and joints become stronger and thus atrophy stops. This helps prevent joints and bones from shifting.

Painful sensations and spasms stop when exposed to sinusoidal modular currents by the end of the first session.

Preparing for the session

Before carrying out the amplipulse therapy procedure, no special measures are required. This technique can be performed on an outpatient basis, so the person does not need to go to the hospital.

The only requirement from the patient is to be in the physical room at the time prescribed by the attending physician. Based on the disease and its neglect, such sessions are held every day or every other day.

In particularly severe cases, two-time amplipulse therapy may be required within one day. The pause between them should be at least 5 hours.

Features of procedures for osteochondrosis

Comments 0

Amplipulse therapy is a method of physiotherapeutic local impact on the body, during which the area of the affected organs is exposed to electrodes with alternating current (sinusoidal modulated current - SMT). The name of the method (amplitude pulsations) is due to the fact that during the procedure a certain mode of modulation of electrical oscillations is set.

Some modern devices provide the opportunity to carry out not only amplipulse therapy, but also treatment with unmodulated low-frequency currents (for some diseases, a treatment regimen is prescribed that includes alternating these types of effects).

Stationary amplipulse therapy device

The most widely used physiotherapy procedure is amplipulse therapy for diseases of the spine (spondylosis, osteochondrosis, hernias and others) and other diseases of bone and cartilage tissue associated with significant pain.

How is the treatment carried out?

Photo from the site narochbereg.by

Amplipulse is performed in a physical therapy room. The patient can stand, sit or lie - it all depends on the affected area.

The doctor installs the electrodes, then turns on the device and configures the desired treatment option. The current strength is selected manually and adjusted depending on the patient’s sensations. Moreover, with each subsequent session the impulse increases. As a result, the patient should feel oscillatory movements.

There are two methods for conducting an amplipulse:

percutaneous;
intracavitary.

In the first case, a damp cloth folded in several layers is applied to the skin above the sore spot, and an electrode is attached on top. The structure is fixed with an elastic bandage or pressed with a weight. The second electrode is installed on the opposite side or not far from the first and is also fixed.

When conducting an amplipulse intracavitarily, sterile tips are used. They are coated with gel and slowly introduced into the cavity. With this method of therapy, it is allowed to use only the first operating mode of the amplipulse. The current strength is increased in small doses until a slight vibration appears.

Physiotherapists warn that one should not expect a quick effect from the amplipulse. For the condition to noticeably improve and remain so for a long period, at least 10–15 procedures will be required. At the same time, physiotherapy gives a very lasting result, so treatment can be repeated every 1–1.5 years.

The Amplipulse device is used in complex treatment osteochondrosis. Application of the technique allows:

relieve pain for other therapeutic measures;
eliminate the inflammatory process;
improve blood flow in the spine;
restore cartilage tissue.

For osteochondrosis, during the procedure the patient lies face down on the couch. The doctor attaches electrodes to the back. Most often they are located at the location of the disease - in the cervical, thoracic or lumbar region.

If there is severe pain, pinched nerve roots or serious damage to cartilage tissue, electrodes can be attached throughout the back.

The procedure can be used for intracavitary treatment. Special sterile disposable electrodes are lubricated with petroleum jelly and inserted into the vagina or rectum. In this case, only the first mode of operation of the device is used - low-frequency sinusoidal currents. The electrodes are in direct contact with the mucous membrane, so high current strength cannot be used, and the procedure should not last longer than 10 minutes.

When used in the head area, the first mode of operation of the device and a small current are used

Only in the first mode of operation, at a low current strength, the transcranial amplipulse therapy procedure is also carried out. Two small electrodes are used: one is placed above the eyebrows, the other on the back of the head in the area of the occipital fossa. They are fixed with elastic bandages. Set the modulation frequency to 100-150 Hz, and pauses between pulses for 2-3 seconds. This has a sedative effect, stimulates blood circulation and relieves pain.

It is no coincidence that amplipulse therapy has been used for many years in the complex treatment of many diseases. Positive effects procedures are noticeable after 2-3 sessions. The patient's painful sensations, swelling and inflammation disappear. For diseases of the musculoskeletal system, amplipulse therapy improves metabolic processes and blood circulation, thereby accelerating recovery.

Amplipulse therapy is prescribed for many diseases. Sometimes as the main therapy, sometimes as an auxiliary therapy in combination with other procedures. This treatment with sinusoidal currents (SCT) is combined with drug therapy, heat therapy, hydrotherapy, massage, and exercise therapy. Good results are obtained by treatment in combination with electrophoresis when administered medicinal substances. However, in this case, contraindications are possible if you are prone to allergic reactions to certain medications.

This method is widely used and easily tolerated by patients of any age. There are indications for treating children. Pediatricians successfully use its properties to treat many childhood diseases.

Amplipulse therapy is a painless procedure. By acting on the problem area, it can reduce swelling and inflammation, pain, and reduce the severity of symptoms.

About the procedure

To carry out the procedure, you must lie down or sit on a couch. The doctor finds the most painful place. Electrodes are selected according to the size of the site of the disease. They are fixed with an elastic bandage.

The plates used are the same as for galvanization, that is, rectangular in shape with rounded edges. They are made of metal. The size of each plate is 5–300 cm2. One is attached to the site of inflammation, covering it completely. The second is fixed either at a distance equal to the width of the electrode, or on the opposite side of the body.

The electrodes are applied to special pads and applied to the diseased area of the body. Then the current is applied, first in a small volume, then gradually increasing until a slight tingling sensation is felt on the skin.

When electrically stimulating muscles, the location of the electrode is determined by the type of paralysis or paresis. For paresis on the periphery, electrodes are placed at the site of projection of motor points of nerves and muscles. For central paresis, antagonists of the muscles affected by spasticity are stimulated.

When turned on, the current gradually increases, and the patient feels vibration. It is used to determine current tolerance.

Before treatment, a person should sit or lie down comfortably and relax all muscles as much as possible.

Mechanism of action

What is an amplipulse and how does it differ from other currents used in physiotherapy? The effect of electrotherapy is based on pulsation of medium-frequency currents, modulated in amplitude and having a direct effect on nerve and muscle fibers.

As a result of the transformation, a series of impulses are formed, reminiscent of a blow or push. These rhythmic beats cause a response from the nerve endings, promoting the excitation of synapses. At the same time, a focus of tension is created in the central nervous system, effectively suppressing spasm and painful sensations.

Simultaneously with the stimulation of its own currents, the amplipulse activates the production of endorphins in brain cells and has a slight relaxing effect. The simultaneous influence of these mechanisms provides almost 100% relief from discomfort and pain.

In addition, the use of an amplipulse leads to muscle contraction, causing blood flow to the problem area and eliminating the source of inflammation. Along with this, venous circulation also improves - in patients, swelling decreases, metabolism improves and congestion in the limbs is eliminated.

The therapeutic effect on the body during amplipulse therapy is carried out through alternating current. The modulated current has the property of acting and penetrating into the underlying tissues and creating a series of rhythmic pulsations in them, which create their own currents in the neurons. Thus, a focus is created in the nerve fibers that blocks the pain sensation.

In this case, endorphins are produced in the cortical nuclei of the brain, which have the property of relieving pain. Thus, the fight against pain is created through a combination of the generation of a focus of excitation in the central nervous system and the release of an increased amount of endorphins provoked by it.

Features of amplipulse therapy:

Modern devices for amplipulse therapy make it possible to set different modes impact- with different values of modulation depth and frequency, different variability of current impulses and interruptions.
Also, the above-described series of rhythmic pulsations are created in muscle fibers, which helps improve blood circulation and metabolism in underlying tissues.
The greater the modulation depth value,the frequency of the current is lower and the longer the current is directed, the greater the irritating effect of the procedure.
Compared to types of physical therapy, which use direct or unmodulated current (DDT devices), the sinusoidal current is softer, so the patient does not experience tingling or other unpleasant sensations on the treated area of skin.
High modulation frequency currents are used for smooth muscle spasms(visceral organs and vessels), work with the brain and severe pain. Currents with an average modulation frequency - when working with pathologies with a chronic course.

Types of currents

Also, the device for amplipulse therapy has a “straightened” operating mode, designed for introducing various compounds under the skin through electrophoresis.

Amplipulse therapy is the effect of sinusoidal modular currents (SMC) on the nerve receptors of the body. By using special device Through special electrodes, alternating electric current is supplied to certain areas of the body. It causes rhythmic contractions of muscle fibers, blood flow to tissues and activation of metabolic processes.

The procedure uses low frequency currents, which are applied with short pauses. This alternation of different modulated frequencies is safer for the body than other electrical procedures. They are distinguished by their gentle impact and, although they penetrate deeper into the tissue, they do not cause any unpleasant sensations. Therefore, amplipulse therapy is widely used to treat children after six months of age.

Features of treatment in childhood

Amplipulse is used for small children only in alternating mode; treatment is allowed from 5-6 months of age (Amplipulse devices).

The straightened mode is prescribed to children from 2-3 years of age.

Treatment methods and techniques are similar to those for adults, with the only difference being that the intensity and duration of the procedures are reduced by half or a third. The area of the electrodes must correspond to the size of the pathological focus, so it is smaller than in adults. The electrodes are secured exclusively by bandaging, ensuring a tight fit. The electrode end of the wire is fixed together with the electrodes to prevent burns.

Current dosage according to density: for children under 2 years old - 0.015-0.03 mA/cm2, 3-7 years old - 0.04-0.08 mA/cm2. Be sure to monitor your condition throughout the entire procedure.

After the amplipulse, the skin should be lubricated with glycerin, half diluted with boiled water, to avoid irritation and peeling.

Examples of application of SMT

Amplipulse therapy is indicated for a large number of diseases musculoskeletal system of various etiologies. At the same time, various diseases suggest different types exposure to sinusoidal currents.

Osteochondrosis of the lumbar region

The impact is carried out on the affected part of the spine according to the following scheme:

4th and 3rd types of work are used(each for 5 minutes, the total duration of exposure is 10 minutes).
In case of a chronic course of the process, the influence scheme: modulation depth 75-100%, frequency 30-40 Hz.
At acute course : depth 25-50%, frequency 80-100 Hz.
Duration of the procedure– 5 minutes, the course includes 8-12 procedures.

Electrophoresis of ganglion blockers and analgesics using an apparatus for amplipulse therapy is also indicated; it can be combined with

Magnetotherapy

Electrodes are placed on the sides of the hernia. Modulation depth 50%, sending duration 1s, modulation frequency 80-100 Hz. Duration – 10-15 minutes. The course consists of 8-10 procedures.

Stimulation of the fallopian tubes using amplipulse therapy can only be started after completion bloody discharge during the cycle (otherwise they will stand out even more). They treat uterine fibroids, hypertension, hot flashes in postmenopause.

Application of amplipulse

Using an amplipulse therapy device, diadynamic stimulation of the tubes can be achieved. The cathode is placed in the vagina, and the anode in the tailbone area. Force direct current 8-12 mA, sending duration – 1 s, procedure duration – 15 minutes. Up to 10 procedures are performed per course.

Fourth degree scoliosis

Electrodes are applied left and right, parallel to the spine (affected section).
First they work with DN current for half a minute(in alternating mode), then with the eye of the CP, applying a change in polarity, for three minutes.
With amplipulse therapy cervical region after this they operate with the PN current (1 min) and then with the IF current (4 min).
When affecting the sacral and lumbar region– increase the duration of operation of the gearbox current by a minute, starting from the third procedure.
When operating with PN and IF currents, the depth is 50%, modulation frequency 80-100 Hz, sending duration 1 s.
Amplipulse therapy course for the cervical spine 8-10 procedures, for the sacral and lumbar – 5-8.

The electrode is placed on the inner surface of the foot. They operate with low frequency current (alternating mode) with zero modulation depth for half a minute. Then they work for 3-4 minutes with PN and IF currents with a depth of 50-100%, a modulation frequency of 80-100 Hz and a burst duration of 2 seconds. A total of 12-14 procedures are performed.

Treatment of flat feet

Pregnancy is a contraindication to amplipulse therapy, since the antispasmodic medical effect it provides can lead to miscarriage in the pregnant patient or to intrauterine deformities of the fetus.

The use of this method of physiotherapy for the treatment of children imposes certain limitations:

It can only be used for children over six months of age.
The duration of one amplipulse therapy procedure is half of the duration for a similar disease in an adult patient.
By virtue of large number unconscious micromovements in young children, it is advisable to wrap the electrodes with a bandage.
The straightened mode is used only from the age of three.

During the procedure, verbal contact with the baby is needed (ask him about pain and discomfort to determine whether the procedure is suitable).

Stories from our readers!
I want to tell my story about how I cured osteochondrosis and hernia. Finally, I was able to overcome this unbearable pain in my lower back. I lead an active lifestyle, live and enjoy every moment! A few months ago I got a cramp at the dacha; a sharp pain in my lower back didn’t allow me to move, I couldn’t even walk. The doctor at the hospital diagnosed osteochondrosis of the lumbar spine, herniated discs L3-L4. He prescribed some medications, but they did not help, the pain was unbearable to endure. They called an ambulance, they put a blockade and hinted at an operation, I kept thinking about this, that I would turn out to be a burden for the family... Everything changed when my daughter gave me an article to read on the Internet. You can’t imagine how grateful I am to her for this. This article literally pulled me out of my wheelchair. Last months I started moving more, in the spring and summer I go to the dacha every day. Who wants to live a long and energetic life without osteochondrosis,

The device for amplipulse therapy functions correctly only with the following parameters environment according to the instructions (deviations from them may result in side effects or device breakdown):

Air humidity no more than 80%.
Atmosphere pressure 650-800 mm Hg..
Room temperature 10-35 degrees. Celsius.
Mains voltage 220 W.

In order for the use of amplipulse therapy to bring maximum benefit and not create unexpected unpleasant consequences, it is necessary to strictly follow the safety rules at home during therapy:

Do not turn on the device with the housing removed.
Do not troubleshoot the device, without first disconnecting it from the network.
Before placing electrodes on the patient’s body, check the integrity cord insulation and correct connection of the device.
Change the position of the electrodes on the body is possible only at zero current.
With amplipulse therapy of the head and neck apply minimal current.
Place electrodes only on dry skin, Before installing the electrodes, make sure there are no signs of inflammation, cracks, or damage to the skin.
Communicate with the patient during the procedure(if he says that he is uncomfortable, the force of influence should be reduced).

IMPORTANT! Do not use the rectified current mode during amplipulse therapy on patients who have undergone osteosynthesis or have implants in the body!

inflammatory gynecological diseases, uterine fibroids, mastopathy, endometriosis;
neuralgia, neuritis, plexitis, radiculitis, neuromyositis;
muscle atrophy due to prolonged immobility;
urolithiasis, prostatitis, cystitis and other urological diseases;
bronchial asthma, bronchitis, pneumonia;
gastritis, ulcer in remission, colitis, biliary dyskinesia, reflux esophagitis;
hypertension 1 and 2 degrees, atherosclerosis;
cardiac ischemia;
paralysis, Parkinson's disease, cerebral palsy, recovery from stroke;
diseases of the musculoskeletal system - arthrosis deformans, spondylosis, osteochondrosis, periarthritis;
rehabilitation after injuries and surgical interventions;
migraine, cerebrovascular accident;
obesity, diabetes;
inflammatory eye diseases.

The amplipulse therapy procedure is safe, therefore it is used even for the treatment of children

Treatment is selected individually for each patient. That is, it is difficult to say how long the course is needed for you, how long the procedure will take - it is important to contact your doctor with these questions. Let's look at a few examples of treatment, right?

Lumbosacral radiculitis. Electrodes are placed on the sides of the spine. Moreover, when undergoing the procedure, they cannot be moved. The current is supplied for 3–5 minutes. The current strength is carefully increased until vibration is felt under the electrodes. The duration of current supply is 2–3 seconds. The modulation depth in the first procedures is 25–75%. When pain decreases, the depth is increased to 100%. The course of treatment is 10–15 times.
Raynaud's disease stages 1–11. The electrodes are placed transversely: the first on the gastrocnemius muscle, the second on the anteropateral part of the lower leg. Electrical exposure for 3–5 minutes. The current strength is set according to the patient's sensations. Modulation depth 75–100%. Current supply duration is up to 3 seconds. The course is 8–10 times, the frequency of procedures is daily.

If indicated, the doctor may allow you to carry out the procedure at home yourself. But even in this case, it will be better if a professional does several sessions for you. After all, mistakes in the technique are unacceptable.

Basic safety rules that you will need to follow if you are being treated at home:

The device is connected to the network using a special cord.
The electrode plugs must fit tightly into the cable sockets.
It is prohibited to move the electrodes during the procedure. Movement is allowed only when the output current is zero.

The Amplipulse device, which has proven itself over many years of widespread use, is available in all clinics, sanatoriums and hospitals. They are produced by JSC Izmeritel Plant. All devices are manufactured with microprocessor electronics and equipped with several degrees of protection.

And other pathologies of the musculoskeletal system and central nervous system. The duration of treatment depends on the severity of the pain syndrome and the characteristics of the pathology.

Mechanism of action

Compared to direct and low-frequency currents, the amplipulse acts more sparingly, so there is no burning, tingling or heat when used. On the contrary, patients find the procedure very comfortable and compare it to a massage session.

Indications and contraindications

Thanks to its gentle effects, amplipulse therapy can be used to treat a wide variety of ailments. The procedure is most often prescribed for osteochondrosis with intense myofascial syndrome, gynecological disorders, diseases of the male genital area and excretory system.

List of indications for use of amplipulse:

lesions of the central nervous system with movement disorders;
urolithiasis disease;
obliterating atherosclerosis;
diabetes;
metabolic disorders, obesity;
persistent hypertension;
inflammation of the sciatic nerve.

Amplipulse gives a good effect for rheumatoid arthritis, gout, osteomyelitis and other pathologies of cartilage tissue. The procedure not only reduces pain, but also restores mobility and prolongs the period of remission.

Other indications for amplipulse often include prostatitis, peptic ulcers, gastroduodenitis, hypomotor dyskinesia in the postoperative period, and eye inflammation.

Despite the safety and gentle effects, amplipulse cannot be done for everyone. Among the contraindications, the following are especially noted:

oncology of any localization;
presence of a pacemaker;
angina pectoris, tachycardia;
pregnancy;
hypertension II and III degrees.

Amplipulse is not prescribed in case of fever, with a tendency to bleeding, varicose veins and thrombophlebitis. Contraindications may include fractures without plaster application, muscle and ligament ruptures.

It is also better for women during menstruation to avoid performing an amplipulse. The procedure may increase bleeding and make you feel worse. It is not advisable to combine amplipulse therapy with drinking alcohol of any strength.

Preparation

There is no preparation as such for amplipulse physiotherapy. The patient only needs to show up for treatment in good health at the specified time. Fever, rash on the body, the presence of wounds, pimples and scratches at the site where the electrodes are applied will be a contraindication to physiotherapy. When using the amplipulse intracavitarily, a preliminary diet will be required.

Immediately before treatment, watches, chains, piercings and other metal objects must be removed from the body. If you have implants or a pacemaker, you must warn medical personnel about them.

How is the treatment carried out?

Photo from the site narochbereg.by

Amplipulse is performed in a physical therapy room. The patient can stand, sit or lie - it all depends on the affected area.

There are two methods for conducting an amplipulse:

percutaneous;
intracavitary.

In the first case, a damp cloth folded in several layers is applied to the skin above the sore spot, and an electrode is attached on top. The structure is fixed with an elastic bandage or pressed with a weight. The second electrode is installed on the opposite side or not far from the first and is also fixed.

The average duration of exposure to one zone is 7–10 minutes, the total duration of the manipulation can be up to 1 hour.

Safety precautions

Today, for amplipulse treatment, in most cases, models 4 and 5 are used. They are characterized by safety and a high degree of reliability. To simultaneously perform electrotherapy and electrophoresis, the Amplipulse-7 model is used.

Each device comes complete with electrodes for different purposes, so there is no need to look for additional equipment. The second class of protection does not require mandatory grounding and allows the use of medical devices not only in a physiotherapy room, but also in any hospital department.

The Amplipulse device is lightweight and easy to use. However, when working with it, you must follow basic safety recommendations:

It is prohibited to use a faulty device;
The device should be plugged in and turned off only when the handle is in zero position;
If it is necessary to move the electrodes during treatment, the current should also be reduced to a minimum.

When the Amplipulse device is connected to the network, you cannot wipe it with a damp cloth, open the casing, or change parts. If problems occur in the operation of the device, you must turn off the device, install an appropriate sign on it and notify management about the breakdown.

The benefits and harms of amplipulse

The therapeutic effect of the amplipulse is caused by a series of electrical impulses of a given strength. In the intervals between them, muscle fibers relax. This ensures deep penetration carrier waves, warming up and increasing blood circulation in the affected area.

What does amplipulse do:

eliminates inflammatory foci and accelerates the resorption of infiltrates;
improves muscle tone, stimulates tissue regeneration, prevents atrophy;
increases local metabolism;
relieves swelling and has a vasodilating effect.

In addition, the amplipulse stimulates the secretion of internal organs, accelerates bile secretion and facilitates the outflow of urine. The procedure perfectly relaxes and relieves muscle spasms.

As for the harm from the amplipulse, it exists. But it is not the procedure itself that has a negative impact, but the illiterate actions of medical personnel. For example, setting the current too high can cause burns. And prescribing amplipulse to people with a pacemaker or metal prostheses will end very badly.

When will the first results of the treatment be seen?

Amplipulse therapy for osteochondrosis

The main role of the amplipulse in spinal osteochondrosis is to localize pain and relieve muscle spasm. As a result of improved blood circulation, the restoration of cartilage tissue is accelerated, inflammation disappears, and regeneration processes are activated. When prescribed correctly, the procedure can lead to long-term and stable remission.

The use of amplipulse is especially effective in the early stages of osteochondrosis, until degenerative changes have affected the intervertebral tissues and caused. A good result for osteochondrosis is obtained by combining modulated currents with medicines. In this case, a hydrophilic pad is impregnated with a medicinal solution and placed between the body and the electrode.

Physiotherapy with amplipulse should only be performed medical worker and as prescribed by the attending physician. Using the device on your own without making a diagnosis can lead to unpleasant consequences. Also, you cannot use amplipulse therapy if you are individually intolerant to currents and have contraindications.

Useful video about amplipulse therapy

List of sources:

Neuropathology / Badalyan L. O. // M.: Education, 1982.
Medical rehabilitation (manual, 3 volumes) / Bogolyubov, V.N. // Moscow - Perm, 1998.
Physical rehabilitation / Popov S. N. // Eksmo, 2005.
Fundamentals of physiotherapy for medical schools / Koshkalda S.A. // Rostov n/d.: Phoenix, 2005.