Most apartment houses Equipped with systems for monitoring and providing or, on the contrary, restrictions on the room access. In a situation where uncomfortable to disturb the neighbors, or when they are missing and cannot help, it will be useful for how to open the intercom without key. This is about this and go further.
If a citizen needs to quickly get into his home, and the unlocking element stayed in an apartment or lost, what to do? Is it possible to open an intercom without a key? there is various methods solve the problem of.
Why it became possible
As a rule, standard factory passwords are provided for any similar equipment. Installation specialists enjoy the service menu. Device manufacturers fix the generally accepted digital set, which when installing the intercom should be changed. But not every wizard complies with the prescriptions. Therefore, to open the door, it is enough to know the code of the manufacturer's specific device and type it on the panel. But if the equipment breakdown and repaired it, then the set of numbers will already become different, and this method for opening the door will not work.
To whom access is open
The universal key of the intercom is available to a number of officials, including:
- emergency medical care workers;
- police officers, other power structures;
- specialists of the organization serving a high-rise building;
- postmen.
Some citizens do not want to install tubes in their apartments, but fear that then access to ambulance will be closed. These experiences are groundless, since the doctors have a password for the entrance, and in an emergency they will freely fall into the right entrance.
Algorithm of action
But in addition to the universal code, there are also other methods, how to open the door with a self-key intercom. Here is some of them:
- Having an incomplete force man can stick to the door panel and sharply rush her over. This uncomplicated way can work.
- If you turn on the electrocompressive device and send a discharge to the chip, mounted in the panel, the lock will open.
- You can bring a burning lighter to the chip and hold it for a few seconds, the lock can open. This method is not one hundred percent, but sometimes it works.
- Punch along the zone below the panel is 15 cm, reduce the power of the magnet, which will allow you to open the door.
Listed methods are not legal. Therefore, deciding to take advantage of one of them, you need to be ready to be responsible. In order not to create a problem, it is better to disturb the tenants of other apartments or wait for anyone from the incoming / out of the entrance.
Another option that is increasingly used to protect housing -. The decision to hire duty at the entrance is the owners of the premises. The obligations of concierge finds not only for those who come, but also for the order, prevent damage and theft of generalicity.
Universal key
It is this device that helps to overcome reliable, it would seem, the barrier on the way into the entrance. It allows you to open most of the castles of electronic negotiation devices. Universal code for the intercom are in persons performing on specific sites official dutiesrequiring access to the entrance.
The knee is performed not only in the form of a key, but also as a tablet, keychain. In the chip, the information is stitched, considering that the intercom will open the castle. The difference from the use of the "native" key is longer, for 6-7 seconds, the procedure. You can use the "digital laundry" only in order to fulfill official duties.
How to open an entrance door with a special code
By installing the intercom, the company's employees must reprogram it, that is, rewrite / change the service digital set. If they did it, then open the door will not work. In the case when installation experts reacted unfairly, the intercom codes can be easily opened. It is enough to dial a certain combination of numbers. Since the answer to the question, how to find out the code from the intercom depends on the device model, consider some of them.
Vizit.
This is the most common type of negotiation device in our country, equipped with an electronic lock. How to open the intercom "Visit" depends on the equipment model. We offer to use the following options.
- Dial such a sequence: 12 # 345.
- If the door has not opened, enter the code: * # 4230.
- In the case when neither the first nor the second version did not work, it means that the door is equipped more modern model devices. In this case, the code from the Vizit intercom will be either 67 # 890, or * # 423.
You can try to open the door and using the preset menu. Algorithm of actions Next.
- Press the # key. Wait for a beep indicating that input is in the menu.
- Enter a set of numbers that are often used by installers. Usually it is 1234, 1111, 0000. The beep will be a confirmation that the code approached.
- Dial a combination of 2 # 3535 for emergency opening.
If it was not possible to get into the entrance to the methods described, it is advisable to wait for someone from the tenants or disturb the neighbors.
Metacom
The popular model of devices often used in the Russian Federation due to the fact that they work even with glaciation. There are models with display and without. Consider several methods, how to open the intercom "Metak" without a key.
Method number 1. Call, apartment number with which the numbering of the entrance begins, again the call. Seeing on the COD monitor, dial 5702.
Method number 2. Start with numbers 65535, click the call button. Enter the 1234 code and call again, and then 8.
Method number 3. Start with a standard set of 1234, call, 6. Then click the challenge and 4568.
The code from the MK-20M / T METAKOM intercom is somewhat different. The instruments of the specified model are responding to such actions: Call, 27, Call, 5702. Another way to open the door is the following combination: Call, 1, call, 4526.
Cyfral.
This type of devices is also quite popular, as it allows you to connect a large number of apartments. When the entrance is no, multiple 100, code from intercom Cyfral. It becomes available using simple manipulations.
- Press the call.
- Dial one of these numbers: 100, 200, etc., call.
- Enter: 7272, 7273 or 2323 (one of the listed).
Cyfral CCD 2094 M holders are wondering how to open without a key this device. Enter 0000 and call. Wait when COD appears on the screen. One of the combined combinations will help unlock the door:
- from 1 to 6;
- 456999;
- 123400, challenge;
- if after 8-10 seconds, F0 appears on the display, set the combination 601.
When the model is marked as 1M, then after entering 0000 and the call device will either open the lock, or go into the menu mode, which will indicate on the screen. Then you need to dial 2, and the input will be open. Seeing fromF in the window, you need to keep in mind that the basic encoding has been changed.
Eltis.
Intercoms of domestic production. Electronic negotiation-lock devices of this type are easy to operate. The easiest code from the ELTIS intercom is 07054. If it is not suitable, then dial: call, 100, call, 2323 or 7273. How to open an ELTIS intercom if the specified manipulations did not work? Then it is recommended to use the Action Algorithm described above provided for the Cyfral device.
Forward
Methods, how to choose the Forward Intercom code, as a whole, similar to the process for devices for other modifications. To do this, make one of the standard factory combinations: 2427101 or 123 * 2427101. There are models whose keys contain letters. In this case, such codes can help: K557798K or K1234.
There is another option how to open the Intervard intercom without a key. Some modifications have small holes in the chip location zone. It is enough to put a rigid wire, a stilette or clip, slightly pressing, and the lock will open.
Rainmann.
The device opens after uncomplicated manipulations. First, press the button on which the key is drawn, then 987654 are entered. After the sound signal, dial numbers from 1 to 6. The appearance of the letter P letter P is a signal for entering the number 8. This is the code from the Rainmann CD 2000 intercom.
Domoguard
This model can also be opened, without having a key, but it is necessary to act quickly. After pressing the C key and the sounding signal, dial: 669900, a challenge, and the figure equal to the last apartment number in this entrance plus 1. The letter F and two dashes mean that you need to enter 080.
Factorial
Factorial is an intercom that opens by introducing simple codes, such as six zeros or a set of numbers from 1 to 6. If nothing came out, press with a delay of 5, 180180, call, 4, call.
Marshal
If you have to open the intercom "Marshal" without a key, to begin with, you should clarify the number of the last apartment in this entrance, add 1 to it, and get the result to dial on the panel. Next, enter either K1957 or K5555.
LascomeX.
The feature of these devices is that at the time of installation, a separate code is set for each apartment connected to the intercom. Is it possible to get into such an entrance without a key? There is also a way out. Puck: challenge, apartment № and unique password. Another penetration version: Enter 0000, then 6666. The letter P appeared on the screen allows you to complete the opening of the Laskomex intercom by entering the code 8. After some time (up to one minute) the path will be open.
Barrier II, 2M
The device with a mechanical lock is rare, mainly in old high-rise buildings. For opening, a standard password is used 1013. In addition, the lock can be left, having spent on the key for the key with a magnet.
Finally
Today, almost every door, blocking the entrance to the entrance of a multi-storey house, is equipped with an electronic negotiation-locking device. In the situation with the lack of a key, every person fell. If there is no one at home, you can call neighbors, try to use the universal code, which corresponds to the device model. When such a reception does not work, you have to expect while someone does not open the door.
Today, almost in every entrance apartment house Installed protective equipment. Any company manufacturing intercom equipment programms a special code to open the intercom.
The programmed opening code allows you to access the room in the absence of the key. The set password can be diverse and contain an apartment number or a random set of numbers.
ELTIS intercoms are produced by the domestic manufacturer. Special attention should be paid to the system of protecting this equipment from hacking. As a rule, a four-digit password is installed. The system itself is three-level and represents:
- Installation password;
- Administrator cipher;
- Secret code.
On this video, we will select the intercom codes together and you can find out the correct combination of numbers:
Method 1: Universal Codes
| In - 100 - in - 7273; | In - 400 - in - 2323; | B - 700 - 7273; |
| In - 100 - in - 2323; | In - 400 - 7273; | B - 800 - B - 7273; |
| In - 100 - 7273; | In - 500 - in - 7273; | B - 800 - in - 2323; |
| B - 200 - B - 7273; | In - 500 - in - 2323; | B - 800 - 7273; |
| In - 200 - 2323; | In - 500 - 7273; | B - 900 - B - 7273; |
| B - 200 - 7273; | In - 600 - in - 7273; | B - 900 - in - 2323; |
| In - 300 - in - 7273; | In - 600 - in - 2323; | B - 900 - 7273; |
| B - 300 - in - 2323; | B - 600 - 7273; | In - 2323; |
| B - 300 - 7273; | B - 700 - B - 7273; | B - 7273. |
| In - 400 - in - 7273; | In - 700 - in - 2323; |
How to open the ELTIS intercom in the absence of a standard identifier? You can try to use software.
Code from throughput equipment may differ depending on the functional features of a particular model. The most common applicable ciphers are:
- Button Call, 100, Call, code 7273;
- Call, 100, Call, cipher 2323;
- Call, 100, Call, code 7272.
Users may have a question: "How to open entrance doorIf the specified ciphers did not work? ". A feature of invincible access is the introduction of apartment rooms, multiple hundreds. For example, 100, 200, 300, 400, etc. up to 900. Therefore, in the specified combinations, password 100 can be changed to another hundred.
It is important to remember to open the intercom, you need to enter only such multiple numbers. Sometimes these methods do not allow you to open the front door without a key. This is due to the possible change in password-programmed during the installation process of equipment. You can try to sharply pull the front door or purchase a universal launder. The new programmed cipher is known to the installer.
Codes for intercoms do not always bring the desired result, but the universal identifier is the opposite.
It will not be unnecessary suspicion in unauthorized access. Unique launders are not suiced, so you do not have them for everyone. How else to open the door without a key?
Method 2: Changing Software Settings
You can open the intercom by changing program settings. To do this, click and hold the call key within 20 seconds. For some time, a five-digit cipher appears on the equipment display. Then this combination will disappear, so it needs to be remembered. This password will provide the ability to enter the settings menu. After its introduction, Code will appear on the call panel.
If, after entering the specified password, this inscription did not appear, you can try to click and hold any number. This action must log in to the service menu.
Open the intercom will allow the recruited combination of 1234. If the degree of equipment protection is higher, then access is not permitted. The display will show a combination that indicates the version of the factory firmware. The inscription FUNC will then appear. It means logging in the menu.
Open intercom after the appearance of such an inscription is impossible. The function of the functional menu has the following features:
- Using the number 1, you can set a password to enter the ELTIC intercom service menu;
- Figure 2 will allow you to install a total cipher. It should consist of four digits;
- Figure 5 allows you to encode the keys of the ELTIS intercom, including and universal;
- Figure 6 will provide access to the menu;
- Keys 3, 4, 7, 8, 9 no information in yourself is not carried;
- Pressing the 0 key will enable the menu.
To open the intercom using a new identifier programming, you need to perform the following steps: Press the 5 key, then Call. On the monitor will appear *** LF. Combination *** indicates the number of a particular apartment. You must generate an identifier for the reader.
If the code was not previously used to this launder, it means that it is absent in the device's memory. Then add an inscription on the screen. If the encoding mode was used, the number of a specific apartment will be displayed. After executing all actions, you need to press 0 and exit the settings menu. Using the programmed key, the door will open.
To remove all keys programmed to the Eltissal intercom, you need to press the number 6. "__ DF" appears. The apartment number and the Call button is recruited. The information "_ DEL" appears. Pressing the number 1, information about the number of deleted keys will appear. To return to the previous menu, 0 is pressed.
To open Eltis's intercoms if the specified codes did not come up, you can try other combinations. For example, combinations of invincible access to Cyfral intercoms. The cipher 0000 will allow you to immediately open the door, or enter the settings.
On video - Demonstration of the opening of the intercom without key and a list of combinations:
Method 3: Universal Intis Intercom Systems
If the factory cipher has been changed, none of the specified combinations is suitable for opening the device. In this case, you can use a universal launder. It simultaneously approaches several models. In modern versions, universal keys come complete with equipment.
To open the intercom, you need to program a universal identifier in its memory. The code information is entered into the microcontroller. Even if the memory is damaged, the key will work. The all-terrain key can be entered into memory of several devices. To do this, you need to enter the program settings and read the new code information. For the manufacture of such laundrs, you can contact the firm that installed the intercom system. Manufacturing such identifiers are also engaged in service firms for the manufacture of duplicates.
Today, the call panels can be seen on private houses, entrance groups Office institutions, apartment buildings.
Subscribers of the system are awarded or contactless radio.
But when they are lost, the user inevitably arises the question of how to open the intercom without a key, if on the street night or option to wait for another visitor and go along with him will have to wait for a very long time.
Open the intercom without a key
To be guaranteed to get into the entrance - it is not necessary to know how to hack the intercom.
It is enough to have a so-called universal key. Making such an access tool offers many workshops.
Some people consider exactly such a universal launder most conveniently, especially in cases where they need the opening of the intercom of one brand of the house, at work, in the entrance of the parents.
It should be remembered that the universal key intended for the definite brand devices will not work on other access control systems.
Any intercom system one way or another provides that as a result of problems or loss of all elements of access authorization, there must be an emergency or sufficiently regular scheme of the service engineer or subscriber.
It can be:
- castle's release in case of troubleshooting;
- access to the engineering menu of programming and maintenance that allows you to activate the base functionality, for example, in the form of unlocking the lock;
- a certain order of reaction to malfunction failures and much more.
Although manufacturers do not enter into public access information, how to open an intercom without key - based on the analysis of documentation, many users have identified the recommended procedure.
Some mechanics are practically guaranteed to get into the entrance. Others - help discover the intercom only subject to the coincidence of several factors.
Visit
This brand of access control systems does not provide mechanics how to open the intercom at all without a key without code.
To get into the entrance, you will have to use the call keyboard and one of the digital combinations that is prescribed in the electronic system of the device by the manufacturer.
Opening of the Intercom "Visit" without a key
It is worth noting: the instruction prescribes service engineers to change the main code words. Therefore, the chance that getting into the entrance will not work - not zero.
- press four times in a row, without pauses, a combination of a key-zero;
- log in to the service menu, pressing 6666 (standard factory set), after appearing on the displays of the USSS, and then p - enter 8 for a single unlocking of the lock.
If these actions do not help - it means that the device settings have been changed by service engineers when installing and learn new codes combinations only in the service company.
Pulse
U - a sufficiently large number of standard code words for different firmware recorded in the electronics memory by the manufacturer.
Opening of the Impulse Intercom by programming
Therefore, a combination can be opened to open the door:
- 123400 call;
- call-1234-C;
- call-99911 call;
- 123456 call;
- call-8080.
If the above combinations have not led to the desired result - alas, the installers conducted programming and changed standard codes.
Conclusion
Most true way Do not fall into unpleasant situations - to act preventively.
It is worth learn from the company serving the company if they can provide an opportunity to access the apartment on a personal code, in addition to using the key.
It is reasonable to make one of the copies - leave at work or elsewhere, access to which you can get around the clock.
And also to check whether the access door opens one of the standard combinations, try to find out the current code from the serving company.
But even if nothing of this is done - with a certain coincidence, you can get home without unnecessary effort using factory intercom codes.
Video: How to open an intercom without a key? Hacking intercom.
Opening of the Cyfral intercom (digital)
I did not accidentally started exactly from this brand: there is a model in my entrance Cyfral CCD-2094 (According to some data, this is one of the most common models in Russia, and also outdated). You can open this door with a key with one of two ways:
1 - Press: 0000 , after which "COD" should appear. This code request for access to the service menu. One of these should be approached: 123456 , 123400 , 456999 . Click on the call button and wait for the reaction. If the inscription "F0" is lit - cheers, I managed to enter! Now enter the code 601 And digitally open!
2 - This option can only roll if there are apartments with rooms 100, 200, 300, 400, etc. in the entrance. For example, take the number 200. What are you doing? Press the button: "B" - then the apartment number: 200. Then again "B" and code: 7272. That is, it turns out like this:
B-200-B-7272
If not the door has not opened - try more such options:
B-200-B-7273 B-200-B-2323
Video instruction:
CCD-2094M can work for the CCD-2094M model. 07054
. There were also cases when you managed to open the intercom by pressing the "B" +41 and "B" +1410 buttons.
In the case where you need to open "CCD-2094.1M" "(you can find it on the screen, where the point flashes or burns) - you need to enter such a code:" Call "+0000. So you will fall into the service menu and the inscription "ON" will light up. Press the 2 button to work "Fast Login" mode.
If the word "OFF" caught fire - it means that the mode does not work and the hacking of Cyfral will not be able for the master was "watched".
Note:
If necessary, you can try on the CCD-2094M model to program your key for the intercom digitulate. You need to click the call button and keep until the device goes to the service mode. Then click on the top five (5) and the number of your apartment. We look at the screen. "Touch" should appear - it reports that you can apply the key "tablet". After you do it, the key will be recognized and open the lock.
Audio components VIZIT (Visit)
As it turned out, Intercoms "Visit" are the most persistent in terms of access codes or hacking. The most common models are BVD-313 and BVD-311. Modern - BVD-343 and BVD-344 are rare. By the way, they already have additional protection against unauthorized management of particularly robust tenants.
When installing, in most cases, the standard settings are usually not left, and to select a visit code after this - you will need a lot of time. If the installers are lucky, leaving the default parameters, then in order to open a VIZIT without a key, try codes:
Old models - * # 4230, or 12 # 345 new models - * # 423, or 67 # 890
Example of code work on the old model:
Also sometimes rolled these options:
# 196 # 999-1-1-5555- "Star" - # 999-2-1-1 "Star" - # 5555
You can try to hack the intercom a visit by login to the service menu through the code # 999, after which two beeps must follow. Now you need to enter the master code of the device. We hope that the installer is lazy and enter 1234. I did not come up? Try: Try: 12345, 0000, 9999, 11639, 3535, 6767. If you're lucky, one short beep will follow and you will fall into the service menu. To open the Vizit door intercom door without a key, you need to dial numbers:
2-pause - # - Pause-3535
An example of autopsy on video:
By the way, if on your intercom VIZIT. There is no "#" and "*" buttons, then do not be scared, instead there are, respectively, the "C" buttons are "Star", and "in" or "to" is a "grille".
Note:
To program your key, you need to click on the "3" button and attach it to the device. After that, the keychain will be entered into the database. The main thing is not to press the number "4" - it will erase all the keys from the memory. To exit the mode, you need to press the "*" button (asterisk), and then - "#".
How to open the intercom with a metal code
In order to open the intercom Metakom without a keychain, you can try to enter the following options:
65535 - "B" - 1234 - "B" - 8 1234 - "B" - 6 - "B" - 4568
Also, there is information that codes may come:
"B" - 1 - "B" - 5702 "B" - 6 - "B" - 4568 "B" - 5 - "B" - 4253 "B" - 1234567 "B" - 1803
Video instruction:
It did not work, then we try to enter the service mode. To do this, you need to know the number first in the entrance of the apartment. After that, click on the "Call" button and keep until "COD" appears. Now click the numbers - 5702 and ... the door will open.
Note:
The network has repeatedly met information on the Metacom MK-20TM model. According to the information given, he has no protection against the hacking of the intercom. Therefore, if you poke into it a clean, non-prominent key, it will switch to engineering mode and automatically unlock the door.
How to open an ELTIS intercom
To date, the non-contact audio intercoms of ELTIS in Russia just a few models. The device is uncomplicated, like the firmware. Therefore, hacking Eltis for young hooligans is frequent. To open the door - try entering the code:
Call - 1234-2-1-3-3-123.
In the case when an attempt ended unsuccessfully, then try these keys:
100 - Call - 7272 100 - Call - 7273 100 - Call - 2323
Just as an option, you can try the codes numbers.
Open the barrier II, 2M and 4
These are very old model intercoms. And that is why they often meet in old nine-fitting and five-storey "Stalinki". In new buildings, you will not meet such 100%. In the models "Barrier 2" and "Barrier 2M" to enter the entrance, you need to press the "1" and "3" or "1" and "0" buttons. Sometimes you can open the door simply by overlapping a magnet in the area of \u200b\u200bthe place of applying keys. For the model "Barrier 4" universal keys or codes at all.
Other brands of intercoms:
Domofones Rainmann and Raikmann
Despite some similarity in names, Rainmann and Raikmann intercoms are completely different devices. Raikmann devices are resistant to cracking and opening without a key on the code on them is impossible. But the Rainmann CD-2000 and AO-3000 models are found.
In order to open the 2000 model, you need to click on the "key", then enter the code "987654". After that, the intercom is squeaking and you need to enter the numbers "123456". If the engineering menu is available, the "P" icon appears on the screen. Now, to unlock and open the door - you need to click on the figure 8.
It is better not to press anything else - you can cut everything and deceive "on the header" from the tenants.
Another lifehak, which is seen by users, is the reaction of the touch keyboard for supercooling. If you roll the snow, attach and hold 15-20 minutes, that is, the chance to open the door.
Factorial
The configuration of the intercoms of this brand is very, very similar to the already familiar digital, only the exception that when installing the device, it is necessary to change the master password and therefore it is believed that it is not possible to open it. Although the option of hacking through the engineering menu can be obtained. To do this, you need to dial the intercom code of the factorial. In most cases, such:
000000 123456
Another option is to click on the "5" button and hold it 5-6 seconds, after which you type it:
180180 + "Call" + 4 + Call Key.
Laskomex (Lasseks)
To open the door to Laskomex AO-3000 VTM, try entering the keys:
1 + "key" + 8976
66 + "Key" + 1989
Did not fit? So the code was replaced during installation.
To enter the service menu, you need to click on the key 5 times, after which the password input field will appear. The default is as follows: 1234. Most often, it is changed when it can be changed, but there is still a chance. For the opening of the door "Laskomex AO-3000VTM" corresponds to the P8 code.
Domoguard
Rare guest in our high-rise buildings. It is extremely rare.
To open the door of the Domogard intercom, we make one long press on the "C". After it leaves the sound - I quickly enter the code:
669900 + "Call" + number of the last apartment in the stairwell plus 1
After that, the screen will appear on the screen: "F-". We inside the service menu! Next, you can use one of the following options:
080 - Open Door 333 - Remember New Key 071 - Disable Door Lock
Blink.
This is not accessible intercoms, but the individual used most often in private houses or where there is a concierge. Universal codes do not exist for it.
T-Guard
Another rare model. There is only one single hack option:
"Call" + 00000 + "Call" + "Call"
The last two calls should be pressed quickly and accessible intercom opens.
Forward (Forward)
For intercoms forward in a network there are very little delivered information. Famous universal keys that managed to start - only three:
123 * 2427101 K + 1234 2427101
In order to schedule your key for the door under the "forward", you can try to enter "77395201" + "*" + 0 + "*. After that, we apply the key tablet and click twice to "#". If the code "77395201" did not work - try this: "5755660".
Condor
Information on master codes to the intercom is missing.
KS-Domofon
About how to open the CS-intercom is very small. The only code that managed to find:
"K" + "377" + Pause + "698" + "K"
There is also information that sometimes the code is triggered:
"K" +0000 "k" +9999
"K" + 0000 + pause + 98 "k" + 0903 + pause + 98 + pause + "k"
Unfortunately, they also work not always.
Video: Opening of the KS intercom:
Technology
In the network, it is information that it is not necessary to turn around the door so simple. In some cases, it can work the following. Be sure to need a key from a similar intercom. Click three buttons "1", "6" and "0". After that, we let go. We start with "0", then "6" and "1". The signal will sound. Here we introduce a default pass - "4321". If the password approached - click on the "call", then to "3" and again "call". Drive the key and the door will open. I myself have not been checked for vouch for it.
Impulse-DS.
Very little information on Impul-DS intercommofones. Possible options:
"1234" + "with" "in" + "99911" + "in"
The first option almost never triggers, because The code will accurately change when installing the device.
Golden eagle
Driving Intercom Berkut LS 2001 - the only model this manufacturer On the market. It is a simple device based on the oscillatory circuit, which is assembled on the resistor and the condenser. Universal codes
"Key" + 123456 + "key" + 5150c "key" + 123456 + "key" + 206c "key" + 123456 + "key" + 6140С "key" + 123456 + "key" + 2589c
Also, you can try to make your master code. To do this, type the command: "key" + 23456 + "key" + "xxxx" will appear icon "F". Now click on "9" and "key". Next, you can enter your 4 digits.
Leader-M.
These devices have not been issued for a long time. No information how to discover the leader, unfortunately, is not at all.
Keyman (Camiman)
At the time of this writing there is one single well-known master code to the Keyman intercom:
"K" + 100 + 789 + 123456 + 8
In some cases, rolls input without the last eight. Video:
Marshal (Marshal)
To open the Marshal intercom, you need to enter a number equal to the number of the last apartment in the stairwell +1, and then - "K" + "5555". I.e:
"Number + 1" + "K" + "5555"
Works in times.
Coral Domofone Service
Devices are extremely rare. Only two master keys for coral service are known:
123 + "Beep" + "1234"
"00" + "beep" + "773952004"
Kamsan (Camsan)
Universal master code for Kamsan Domofones, namely, the COP models - 2002 is missing. There are no information on their programming. It is only known that it will automatically go into programming mode if an empty key-blank is applied to it.
Commax (Comax)
In the entrances you can meet two models of this manufacturer - CommaXCDV-50A and Commax CDV-50AM. They have a very complex device and reveal its safety to anyone practically failed. The only code that managed to find this is:
"K" + "C" + "K" + "C" + "K" + "C" + "K" + "K"
KoCom (Domalophones of Over or Kok)
Information on models of this manufacturer is missing.
BELSPLAT (Belplat)
At the time of writing the key to the opening of the Besplat's intercom.
Prser (Pier)
In the entrances there are models "Pyrro 1000 micro", "Modern" and "Suite". Factory master code for all three species:
"12345678" "k" + "1234"
More for the model "Pier 1000 micro" can work key:
"8310649" + "number of the entrance"
There is evidence that these models of audio intercoms allow you to put your code. This is done like this:
Enter the master code "12345678". If it was not changed, it will sound a beep. Press the door opening button, and not releasing it, press the number 5 digit on the keyboard. Must once again sound the login confirmation signal in the settings. We release the door opening button. Now you need to enter your code - 987, for example. The main thing - the numbers must be no more than 8. And the sequence of the first two digits should not coincide with the master code or apartment number in the entrance. After entering the code, click on the "Star" and twice the "grid". After this, the intercom can be opened by the code: "987" + "*".
Secret
In real life, you can meet only one model of the Intercom - "Secret-999". Codes for it. Husband is not amenable.
Arcadez
In fact, the Intercadess Intercom is a slightly modified model of the COP, which I have already considered higher. Accordingly, KC codes must also come up for it.
Smartel
Information on Codes for the SMARTEL intercom is missing.
Kron.
By default, the "951" key is used, but there is almost no chance that it is not changed. Hacking audio contacts CZK is impossible, since nothing without an individual master key can not be done.
Stroymaster
There are no universal codes for these devices. The only thing that can be done is to try to enter the system menu and put your code. But for this, you must first explore the programming procedure of a new key that is very laborious. Well, then you will need to press and hold the "B" button before the "SYS" inscription appears. After that you need to enter a password. The default is "1234". If it did not come up, then you are not lucky. Came up? Excellent! Program the key according to the instructions and use!
Attention! If you tried to apply the code specified in the article for your intercom and it did not work, it is not necessary to write angry comments. I do not give any guarantees. What works in one entrance is not at all the fact that it will work in another. In addition, recently, the installers became smarter and, having fun from young hackers, began to change passwords and master codes.