Hot glue guns for handicrafts. Unusual use of a glue gun: what can be made from hot glue Hot glue things

When working with hot glue, be careful and pay special attention to the safety of children, as the glue gun gets hot and the glue comes out very hot.

We will tell you about very interesting and extraordinary ideas on how else you can use a glue gun and hot glue.

Using a glue gun you can create various flat ornaments, figures and stencils . Let's look at this technique using snowflakes as an example.

You will need:

nail polish or acrylic paint;
parchment paper;
a drawn snowflake shape (if desired).

Print or draw a snowflake on a regular sheet of paper and place the design under parchment paper.
Using a glue gun and hot glue, trace the snowflake design. Wait a minute for the glue to dry.
Carefully remove the snowflake from the paper. The paper can be further used to create several more snowflakes.
Both sides of the glue snowflake can be painted with nail polish or acrylic paint.

You can also create surfaces with which you can create interesting textures with soft materials. This can be either a flat stamp or a rotating roller with a pattern.

You will need:

hot glue gun;
any rolling pin or hard roller;
felt-tip pen.

Draw any pattern on the rolling pin. It is advisable not to draw too many lines.
Heat up the glue and start applying it to the lines you drew on the rolling pin. It is advisable to carry out the entire process on a flat surface covered with newspaper or cardboard.
Once the glue is dry, you can use a rolling pin to create designs on the clay by rolling it out.

The glue can be removed and a different pattern applied.

They will become a real lifesaver homemade supplies for crafts . Using a glue gun you can create exactly what you need for your idea. These can be simple beads or complex flowers.

You will need:

hot glue gun;
acrylic paint or nail polish;
brush.

It will take a little practice to get such smooth parts, but eventually you will succeed. All these parts can be used to make various crafts and cards. Each dot can be painted with acrylic paint or nail polish.

Not only glue, but also other melting materials can be used as gun rods. For example, wax crayons.

You will need:

glue gun;
wax crayons;
cardboard.

In this case, there is a chance that after using wax crayons, your glue gun will deteriorate, so it is advisable to use an old or inexpensive gun.

Remove the labels (paper) from the crayons.
Cover your work area with an old towel.
Heat up the glue gun.
Carefully insert the chalk into the glue gun and gradually press it down. The glue gun trigger won't be able to push them through, so you'll have to do it by hand.
The wax will begin to melt and you will be able to use colored wax blobs to create colorful blots.

The advent of hot-melt glue and glue guns have seriously expanded our capabilities. A simple device helps to sculpt various parts, assemble furniture, and perform small jobs around the house. They also make a lot of useful and convenient things from hot melt glue.

Features of hot glue

In the gun, hot melt adhesive is exposed to temperatures of up to 200 degrees Celsius, melts and is applied to the desired part. On the surface, the solution dries in a matter of minutes, providing strong adhesion. Bonding strength is achieved due to the fact that the liquid glue penetrates into all pores of the materials being joined, and the seam is flawless.

The features of hot melt adhesive include the following factors:

Drying speed. This takes several minutes, and at higher temperatures - seconds.
Seam strength. It can be compared to metal fasteners. The efforts of an ordinary person will not be able to break the glued parts.
Price. The price of hot-melt adhesive is low, which makes it accessible for almost any job.

Resistance to the influence of various factors. The adhesive joint is indifferent to temperature changes, scorching sun, exposure to household chemicals or water. Glued items can last for many years without the risk of the seam breaking.
Easy removal. If the parts need to be separated, there will be no traces of glue left - just heat the surfaces and remove the product.
Safe composition. When melted, no harmful substances are released, so hot melt adhesive is used in children's crafts.
Possibility of replacing sealant. If it is absent, cracks, chips or holes are sealed with hot glue.

Glue is produced to suit any need and can vary in composition, color, length, and diameter of the rods.

Hot glue crafts

Glue guns are a “weapon” not only in creative hands. For small household needs, a gun with such a solution is also useful. When working with hot melt adhesive, you must ensure good ventilation of the room and protect your hands. The glue coming out of the gun will be very hot, so it is safer to work with gloves.

To understand the value of this device, you need to familiarize yourself with useful ways to use a glue gun.

Anti-slip layer for carpets and shoes

Slippery shoes cause a lot of problems in winter. Moreover, such a sole is equally dangerous for both children's and adult shoes. Rugs in the bathroom also have a slippery base, or glossy floors do not allow them to lie tightly. For both problems, it is enough to use hot melt glue in the following way:

The surface of the rug or shoes is thoroughly cleaned.
The heated adhesive composition is applied to the desired places pointwise, spirally or chaotically. Glue is dripped onto the mat only along the edges of the product, and sometimes a name or design is written on the sole of the shoe so that a funny mark remains in the snow.
The applied solution is given time to dry.

You can perform a similar procedure with children: they will have fun painting their own boots with glue.

Light objects on the wall without nails or holes

There are many lightweight items that can be placed on the wall, such as Christmas lights, birthday banners, photographs or children's crafts. It is inconvenient to drive a nail into each element; it is better to use hot melt glue. The wall is first cleaned of dust and debris, and a small piece of electrical tape is glued to the area of future fastening, onto which glue is applied on the other side. After this, the edge of the desired picture or banner is connected to the electrical tape. When the relevance of the hung banner passes, it is enough to peel off the electrical tape without harming the finish.

It is important to understand that it is not recommended to attach pieces of furniture to the wall in this way: the maximum weight that the adhesive seam can withstand is 150 kg. It may seem that this is enough for a shelf, but as soon as books, vases and candlesticks “stand” on it, the structure becomes dangerous.

Aligning photo frames and paintings

A very common problem is that frames or pictures lovingly hung on the wall are skewed. The reasons usually lie in incorrect weight distribution, because objects often hang on one nail. To align them, a glue gun will come in handy again:

you need to visually determine which edge of the frame is higher;
Apply a little glue to the inner corner and let it dry;
check whether balance has been achieved;
add more glue if necessary.

This option will not only create the right balance for the frame, but will also allow it not to come close to the wall so as not to leave marks.

Pet scratcher

Pet stores sell many items for the enjoyment of animals, including scratchers for cats or dogs. These devices can be in the form of a regular comb or worn on the hand. The second option can be easily implemented at home. To do this, you need to choose rubber gloves of a suitable color and size and apply droplets of glue on them from the palm side. The more drops, the more productive the combing. The glue must be allowed to dry and you can begin the procedure.

Thanks to this “invention”, your pet will not only have fun, but will also be cleaned of faded fur, and much less hair will be scattered around the apartment.

Home made vase

You can add uniqueness to an ordinary glass vase with glue and creative skills. To do this, chaotic or even lines of patterns are applied to the vase using a gun, and small decorative elements are added if desired.

If you use a wide bowl, you can create a candy bowl. To do this, the container will need to be greased with thick cream or oil, applied with frequent patterns of glue, and then removed. A hemisphere with intricate lines will remain in your hands.

Wax crayons letter stamp

It’s convenient that you can insert not only hot glue sticks into the glue gun, but also wax crayons. This way you can actually get material for sealing envelopes:

You must insert a wax pencil without a wrapper into the glue gun;
wait for the material to heat up;
When molten wax flows from the tip of the gun, you can begin to work.

Before starting work, you need to have a rough substrate nearby in order to get used to making beautiful prints. It is important to understand that after these steps you will not be able to clean the gun; it is better to purchase another inexpensive one and make stamps for envelopes only with it.

Bracelets

An activity that will captivate the female part of the family is creating bracelets from hot melt adhesive. To do this, you will need an empty aluminum can from any drink. Then proceed like this:

Apply several thin strips of glue on top of the jar, depending on the desired width of the bracelet;
remove the dried strips and rinse with water;
decorate with additional elements or paint in different colors.

Another option for creating a bracelet is to make many large drops of glue where you can install rhinestones, beads, and figures. After drying, such drops are easily strung on a thread and form a bracelet. It is important to use a surface that the glue will not stick to: parchment paper or a silicone mat.

Eraser on the end of a pencil

Not every pencil is “equipped” with an eraser at the tip, but this is convenient. If your pencil lacks such an important element, use hot melt glue. It is enough just to apply a drop of solution to the tip: the dried glue copes well with the tasks of an eraser.

Fun and Unique Buttons

prepare a parchment or silicone lining so that the glue does not stick;
squeeze out a drop from the gun that forms the desired diameter of the circle;
if desired, decorate the glue or add glitter to it;
Make holes in the frozen round piece with a toothpick.

If you want to decorate the entire button with sparkles, then the first drop should be squeezed onto a surface already sprinkled with them.

Hanger with non-slip hangers

Many things tend to slide off the hanger in the closet. This is a rather annoying phenomenon, because sometimes ironed clothes are waiting for a special occasion, and they are found downstairs, long fallen and crumpled. Hot-melt glue will help eliminate such situations: apply a few drops of glue at equal distances to the top crossbar of the hanger. After drying, the hanger will acquire reliable “barriers” that will prevent clothes from slipping.

Working with a glue gun will become familiar and easy in just a few minutes, even if you have never encountered it before. And the amazing adhesion properties of hot-melt adhesive to different surfaces will open up new opportunities for creativity, household chores or entertainment.

Have you ever wondered what you can do with a glue gun? This is such a popular tool among life hack enthusiasts that many are already starting to joke about it. However, if you think about it, a glue gun is a really handy thing :)

Hot assistant

Today we will offer several practical uses for a hot gun. We assure you that you will even be surprised why you yourself didn’t think of doing this earlier.

The adhesive is strong enough for small repairs. It easily withstands moisture and is easily removed from most surfaces. For this reason, it is a great adhesive for temporary fixes and simple repairs!

Change your ring size

Resizing rings can be an expensive procedure. Hot glue is a great quick fix. Create a small puddle of hot glue on a piece of parchment and carefully dip the back of the ring into the glue. When it dries, leave as much glue as needed to reduce the size, and carefully cut off the rest.

Non-slip hangers

Photo source:

There's nothing more annoying than when a top or blouse just won't stay on the hanger. For a quick fix, just use hot glue. Add a few drops of glue to each half of the hanger. Let the glue dry completely before hanging your clothes on it.

Close the boxes

Photo source:

Instead of fiddling with duct tape, why not use hot glue to seal the boxes? Just go over the joints and glue the lid together well.

Minor repairs

Photo source:

Hot glue works great for most small repairs. Things like torn books and toys can be easily salvaged with a little glue.

Have you ever wondered how to quickly fix a pair of glasses? A small drop of hot glue makes a great (albeit temporary) replacement for a nasal pillow.

Decorate the vase

Hot glue isn't just for sticking things together! Use it to decorate a simple vase or jar. You can make any beautiful patterns. And after that, cover the pattern with paint of any color.

A wide variety of materials and techniques are used to create crafts and interior decorations. Sometimes completely unexpected materials are used for this purpose, such as hot glue. Photos of crafts made from hot glue arouse genuine interest and a desire to try to create something similar with your own hands.

What is hot glue?

Hot glue has another name - thermoplastic glue. The material itself consists of polymers that, when heated, acquire adhesive properties. Typically, hot glue is used to seal joints and glue products together.

Hot melt adhesive is available at most hardware stores. It is produced in the form of solid glue sticks, which differ in color, size and composition.

There is also glue in different colors. To effectively and accurately melt and dispense glue, there are special glue guns into which rods are inserted.

Operating technique

The instructions on how to make a craft from glue are very simple - buy a glue gun, suitable rods for it and use your imagination.

The main thing when working with the material is to be extremely careful and attentive, because the molten glue heats up to a temperature of 200˚ C.

What kind of crafts can be made from hot glue at home? Hot-melt adhesive can be used to decorate vases, photo frames and other interior elements or to create independent decorations.

Candlesticks

The best way to start working with hot glue is with simple tasks, such as decorating a candle holder. You can create an imitation of wax drips on its surface or create a unique pattern. For this purpose, it is better to use colored glue or sprinkle it with colored glitter or glue beads on it.

For decoration, you need to choose wide, thick-walled candlesticks. This choice is due to the fact that the effect of the burning temperature of a candle can have a bad effect on the glue - the design may simply blur.

Before applying hot glue, it is necessary to thoroughly degrease the surface of the candlestick for better adhesion.

You can get beautiful ideas for crafts made from hot glue from the Internet or create your own original pattern.

Vase

You can use hot glue to create a handmade vase for sweets. Step-by-step production with a description for beginners will help you easily create such a craft.

In order to make a vase for sweets yourself, stock up on hot glue, a glass bowl that will serve as a stencil and rich cream. If you want your vase to be colored, use a glue stick with the desired color or buy spray paint of the desired shade.

Apply cream to the outer surface of the bowl - it will prevent the glue from attaching to the glass when applied. Warm up your glue gun and begin applying glue to the bottom of the bowl. Try to distribute the glue evenly - this will help form a smooth, stable bottom of your vase.

After applying the glue, you must wait until it is completely polymerized. You can begin to separate the glue from the bowl only after it has completely hardened, otherwise the craft may be irreparably damaged. After removing the hot glue basket, you can spray paint it.

rolling pin

For those who love working with polymer or ceramic clay, the idea of making rolling pins with patterns will be very useful. To do this, you need to take a new, clean rolling pin of the required size, degrease it thoroughly and draw the required pattern on it with a pencil or marker.

Then use a glue gun to apply glue to the pattern lines and wait until it dries completely. You can also treat the rolling pin with cream or oil before applying glue - this will allow you to remove the glue after using the required pattern and apply a new one to it.

New Year decoration

For your child, you can conduct a master class on crafts using hot glue. Make a large drawing of a snowflake; you can ask the child to make a stencil. Then use carbon paper to transfer the design onto parchment paper for baking.

Apply hot glue along the contour of the drawn snowflake to make a three-dimensional copy of it. Carefully monitor your child's actions at this stage - he may get burns from the hot polymer.

Wait until the polymer has completely hardened and separate it from the paper. After the snowflakes have dried, they can be decorated with ordinary nail polish or spray painted.

Photos of crafts made from hot glue

Nowadays there is a huge variety in the world of handicrafts, and crafts are made from various materials. Basically these are paper, bottles, plasticine and the like that are familiar to us. Most DIY projects require glue to hold them together, but in this article we will show you how to make crafts using hot glue using a hot glue gun. Such crafts look very beautiful and unusual, and most importantly, they are very simple to perform. Even children 5, 6, 7, 8 years old can cope with such work. This article provides several crafts with step-by-step instructions, as well as video master classes for a clearer description. So, let's see what can be done using regular hot melt glue.

Original bowl for sweets

Making a vase will give you pleasure, because it is a creative process. You can put sweets in such a vase and decorate your holiday table with a handmade craft. To make a vase craft, see below for a full description with detailed instructions.

You will need:

Hot glue gun
Paint (preferably in a can)
Glass bowl for base

Progress:

Apply cream to the outside of the bowl so that the glue can be easily removed later.
When the glue has warmed up, we begin to apply it to the bottom of the bowl in an even layer. This way we will have a stable bottom.
Next, starting to move from the bottom of the bowl, apply the pattern with glue. The drawing can be anything you want, depending on your imagination.
Leave until the glue dries completely.
When everything has frozen, carefully remove the adhesive base, starting from the edges.
When you have removed it, you get an almost finished basket, all that remains is to paint it with paints. In this way you can make not only a vase, but also other containers.

Video of a vase made of hot glue

Hot glue bracelet

You can make such a beautiful bracelet with your own hands very quickly and easily. This decoration will not leave anyone indifferent. We will tell you how to make such a craft with a full description of each step.

You will need:

Coca-Cola can
Hot glue
Bracelet Jewelry

Progress:

Apply glue to the jar in horizontal stripes. The width of the bracelet will depend on the number of stripes.
When the glue is completely dry, carefully remove it from the jar. This will be the base of the bracelet.
You can glue various beads or appliqués onto this base, and you can also paint it.

Hot glue butterfly

A beautiful butterfly made from regular hot glue will be a good decoration for a flower pot. The craft is quite simple to do, so you can do it together with your child. Below is how to make a butterfly with your own hands.

You will need:

Hot glue
Glass
Thin wire
Rhinestones

Progress:

Apply cream to the glass so that it is easy to remove the glue afterwards.
First, use glue to draw the outline of the wings on the glass, then fill the middle with a zigzag.
In the same way we draw the body and antennae.
When everything is dry, remove our blanks from the glass.
Using glue, we assemble our butterfly, then attach it to the wire.
You can decorate our butterfly with rhinestones or beads.

Decoration for the New Year “Snowflake”

A snowflake made from hot melt adhesive will be a wonderful decoration for your New Year's interior. Even a 4, 5, 6 year old child can handle this craft, because it is very easy to do. We will tell you how to make a beautiful and bright snowflake with your own hands with detailed instructions.

You will need:

Hot glue
Stencil
Glitter
Parchment paper

Progress:

Take a stencil and put parchment paper on top.
Apply glue on top of the translucent pattern.
Pour a little glitter onto a piece of paper and dip a still warm snowflake into it. Our bright and festive craft is ready.

Video snowflake for the new year

Convenient pencil case

Hot glue can be used to make not only decorations, but also useful items, such as a pencil case. No one at school will have such a pencil case, because it was made by hand. To get started with our craft, read the step-by-step instructions or video master class.

You will need:

Hot glue
Lightning
Wide aerosol can of paint
Decorative butterflies

Progress:

Lubricate the can with cream.
We start applying glue from circles on the edges.
We make two vertical stripes the width of the corresponding zipper.
Then we continue to draw horizontal stripes in a circle (the arcs are approximately 1 cm apart from each other), without going onto the line for the lightning.
On the horizontal stripes we draw a pattern similar to a herringbone or a zigzag.
When everything is dry, take out the bottle and place the cap on the bottle on the sides one by one to apply the design.
We apply the pattern with a fine mesh so that nothing falls out through the holes.
When the entire structure has dried, insert the zipper, securing it with glue.
We paint our pencil case with paint and glue butterflies for decoration. Now you can put whatever you want into it.

Video on how to make a pencil case with your own hands

Amazing roses

Beautiful roses will be a wonderful decoration for your interior, or you can use them as a gift to family and friends. To make it easy for you to understand how to make a rose craft with your own hands, we have made a detailed description of the craft with step-by-step instructions.

You will need:

Glue (can be any color)
Glass
Pencil
Paper
Putty knife
Napkin

Progress:

Draw a circle with a diameter of about 6 cm on a sheet of paper and place it on the glass.
Now apply glue to the circle and level the surface with a spatula. Waiting for it to dry.
Remove the circle from the glass and roll it into a beautiful tube.
We attach the next petal in a more expanded form, and so we do petal by petal.
We glue all the joints of the rose so that nothing sticks out, and apply a thin strip of glue to the outer part of the petals. This way the flower will look more voluminous.
Such flowers can be glued to a wire wrapped in green paper.
Our beautiful rose is ready.

Finally

You can also create a huge number of crafts from hot glue, it all depends on your imagination. Let this article prompt you to the creative process and serve the fruitful development of your creative abilities.