Among modern finishing materials, are very popular plastic panels... And all this because they are lightweight, hygienic, they are easily attached to walls made of any material, they are not afraid of moisture and are not subject to decay. Plastic panels made of polyvinyl chloride (PVC) are made by extrusion, which gives them the necessary strength and rigidity. In this article, we will define the main criteria for choosing this finishing material.
Today the industry produces huge selection plastic panels produced in Turkey, China, Russia and Ukraine, differing in appearance, color, degree of gloss and other characteristics. In any hardware store, eyes run up from their abundance and variety, confusion sets in: so which panels to choose?
All panels are conventionally divided into ceiling and wall panels. Outright ban for use wall panels on the ceiling, and there are no ceiling ones on the walls, but an easy finger pressure test unambiguously interprets that, having low strength, these panels cannot be used for wall cladding.
An additional distinctive element is the length. Typically, ceiling panels are 6 or 12 m long, while wall panels are shorter at 2.7, 3 and 6 m.
Thickness ceiling panels is gradually decreasing by manufacturers, before it was 8mm, then it became 7mm, nowadays there are 5 and even 4mm, and wall panels are usually produced with a thickness of at least 10mm.
Many buyers consider the cheapest panels, but they do not want to pay attention to the fact that a quality product cannot be cheap.
After all, the vast majority of Chinese plastic panels are made from low-grade raw materials, bad adhesives and varnishes. In the future, they will quickly lose their appearance and, most importantly, they will begin to release toxic substances, even the option of provoking an allergic reaction of the human body is not excluded.
So, panels should be purchased thoughtfully, comprehensively considering and paying attention to the following factors. The main types of plastic panels are:
- 1. Plastic lining - used in the decoration of walls and ceilings, use special fastening brackets for fastening. Embossed panels are often called clapboard, because they create an imitation of a wooden panel "clapboard".
2. Plastic panels for tiles. It is advisable to use square tiles with a width of 30 to 98 cm.
3. Sheet panels - reminiscent of plywood. Their main difference lies in installation - fastening is done with glue or nails. The joints are sealed with a sealant or sutured with strips of the structure and color of the panels
From the point of view of the design of the premises, it should be emphasized that the sale has a varied color palette of panels that allows you to satisfy any desire of the buyer.
All panels are conventionally divided into glossy, matte and semi-glossy.
Their technical characteristics are the same, and the difference is solely in the surface layer. This is achieved by using varnish, which creates a layer of a protective film on the front surface.
When choosing plastic panels, you must carefully study the following parameters:
- 1. Thickness of the face - large thickness has significant strength.
2. The number of stiffeners - the more, the stronger the panel. The external condition of the stiffeners must be identical without visible deformations. A quality panel has more weight, which corresponds to its thickness and the number of stiffeners.
3. The outer surface must be uniformly painted, and the viewing of the stiffeners is not permissible. It is easy to check the quality of the panels - just press it down with a deflection of up to 50% and look at the result. There are no dents in high-quality panels, mainly due to the low chalk content.
4. The panels must fit tightly and rigidly into the groove. The type of joint in the panels is seamless and embossed. The most widespread at present is seamless, but it should be called conditionally seamless, because even with the highest quality installation, the joint is still visible.
Poor manufacturing or improper storage and transportation of plastic leads to inevitable deformation and, as a result, to the impossibility of perfect joining of its parts.
Characteristic advantages and disadvantages of plastic panels
Like any material, plastic panels have their own advantages and disadvantages. Let's start with the pros.
According to the manufacturers, all plastic panels are environmentally friendly, do not burn, have sound insulation properties, light weight, good moisture resistance, durability, easy to clean and, moreover, are inexpensive.
The disadvantages of plastic panels are as follows:
- low strength, scratches, dents and chips remain on the surface (one sufficiently strong blow or strong pressure leads to a crack);
panels have a limited scope;
initially there is a specific smell;
being a versatile material, plastic panels are usually used for interior decoration.
Installation of plastic panels
can be performed both horizontally and vertically and even at any angle.
They find their application in the decoration of loggias and balconies, and are also often used as a ceiling material in the bathroom, corridor and kitchen.
Sewing the walls with plastic is extremely simple, therefore, it is done without problems with your own hands.
a) Initially, it is necessary to bring the temperature of the plastic panels closer to the room temperature - if brought from the cold, then let them adapt.
c) Walls with a high-quality dry surface must be sanded, in this case the glue will fit perfectly, therefore, the panels will last a long time.
d) Cutting panels is easy, using a hand saw for wood or metal.
e) For a good appearance, the panels must be cut and drilled on the front surface.
f) But you need to remove the protective film from the plastic panels at the last stage, as it protects the surface of the panel from cuts and scratches.
Finally, a video on the topic from Roman ...
Was this article helpful? Subscribe to site updates to receive the latest articles on renovation and interior design before anyone else!
Widespread plastic pvc panels are used today, as they say, wherever possible - they are used as for their intended purpose, for decoration different surfaces, and for making various decor from them, or simply using them as a lining for something. This distribution is due to two factors: low cost and some unique qualities. In this article, together with the site, we will thoroughly study plastic PVC panels - we will understand their advantages, study the varieties, characteristics, scope and all the rest technical specifications necessary for the successful application of plastic in the field of repair.
Decorative PVC panels photo
Plastic PVC panels: advantages and disadvantages
Among a large number all kinds useful qualities possessed by plastic panels, one can distinguish their moisture resistance and flexibility - this material owes its popularity to them. But the advantages of plastic do not end there - in addition, the following points can be highlighted.
There are many other advantages, but we will finish with them and switch to disadvantages - there are also many of them. Of the main ones, one can distinguish poor resistance to ultraviolet radiation (over time, it turns yellow, especially white plastic) and low impact resistance (it is very easy to pierce the panel with a sharp object). One should be noted here important point- most of the disadvantages of plastic for some reason disappear if you purchase an expensive and high-quality material - only poor impact resistance remains. Even the rigidity of high-quality plastic is much higher - you can't wrinkle it with your finger.
Varieties of plastic panels and their sizes
As mentioned above, the most important difference between some panels from others is due to their area of application - there are plastic ones for walls. They can be confused only in one case - when installing the ceiling. The most you will lose is a little more money. If we talk about finishing with wall panels, then it is very important to use wall panels - they are more durable, less flexible, and their resistance to mechanical damage is higher. The whole secret of their manufacture lies in the thickness of the plastic itself and the content of polyvinyl chloride in it - the more there is, the harder the plastic is. As for the thickness, everything is simple here - the larger it is, the more durable the plastic is. In high-quality products of this type, both the surface and the internal stiffeners are made of plastic, the thickness of which is close to 1 mm - such panels cannot be cut with a knife.
Dimensions of PVC panels
The dimensions of PVC panels are an important factor that determines the differences in plastic, which simply cannot be ignored when choosing it. The width of the panels is of key importance - when decorating ceilings or walls with PVC panels, an almost solid, "monolithic" coating is obtained from wide plastic. Today it is made in widths of 125 mm, 250 mm and 380 mm - it is a little inconvenient to work with wide plastic (it is less flexible). Plastic with a width of 250 mm can be called optimal. As for the thickness of the panels, on which their rigidity and ability not to bend during operation depend, here manufacturers suggest using panels with a thickness of 6 mm, 8 mm or 10 mm for ceilings, and 10 mm or 12 mm for walls. Separately, I would like to say about ceilings - panels up to 8 mm thick, when installed in them, shine through, and are visible behind them. All decorative PVC panels are produced with a length of 5950 mm, and the usual 3000 mm is just a cut.
PVC laminated panels photo
The so-called PVC laminated panels can be distinguished into a separate group of materials. Their strong point is resistance to mechanical damage. In terms of strength, they differ little from ordinary high-quality plastic, but in terms of resistance to scratches and durability of the pattern, they can only be compared with them. In both cases, the same protective film is used. This material is classified as a premium class, and therefore the unusualness of its drawings - in most cases, this is a unique material that can be purchased only in decor salons or studios. It can be made to order. If you are looking for PVC, then this is exactly what you need - only such plastic is able to compete tiles not only in terms of design, but also in terms of durability. Panels lose to tiles only in their rigidity.
In conclusion, I will say a few words about the methods PVC repair panels, or rather about the options for its attachment. For an exclusively frame installation method is used - its advantage is that it allows you to lay point or any other embedded in the ceiling lighting... For walls, the glue method is more suitable - the surface obtained with its help is durable. The plastic does not bend under pressure due to the absence of voids and, accordingly, lasts longer. Even if there is a need for a frame (for example, if you), it will be better first, and then finish with panels. In its pure form (on the frame), it is better not to install plastic on the walls. Look at it from the other side - when you get tired of it, during the next repair it is removed, and you will already have a ready-made flat surface for applying another finishing material.
Repair with PVC panels photo
And finally, I will add only one thing. When choosing PVC panels as a finishing material for residential premises, do not pursue cheapness - in almost all cases, the low cost of plastic indicates its poor quality. Moreover, low-quality material (in the plastic itself) may contain substances harmful to humans. And yet, in almost all cases, cheap PVC plastic, even colored or patterned, is not able to give the room the warmth and coziness of a home - as a rule, the result is an office look and nothing more. Also, think about combining plastic with other types of finishing materials, this will diversify the interior and bring zest to it.
Last updated: 27.01.2020 16:55:44
Expert: David Weinberg
* Review of the best according to the editors of the site. On the selection criteria. This material is subjective and does not constitute advertising and does not serve as a purchase guide. Before buying, you need to consult with a specialist.
V last years more and more Russian homeowners prefer special panels for wall decoration. This building material allows you to revive the interior, independently perform installation work, save money during renovation. Today, there are products on the domestic market different manufacturers... They differ in material, shape, price, etc. To select the most suitable wall panels for a particular room, you should heed the recommendations of experts.
How to choose wall panels
- Types of wall panels. Most often, buyers are faced with three types of wall panels. Rack and pinion products are produced in the form of strips 240-370 cm long, 12.5-30 cm wide, 8-12 mm thick. Such a finish is best suited for small spaces, the connection of individual elements occurs by means of spikes and grooves. Tiled panels are made in the form of squares measuring 30-98 cm. Such elements are fixed with glue or clamps. With their help, it is possible to create unique drawings. The largest are sheet panels. They reach overall dimensions from 1.22 to 2.44 m. It is best to use this finish in large rooms, installation takes place in the shortest possible time.
- Base material... All decorative panels consist of a base and a cover. The most popular are PVC products. They are lightweight, affordable and moisture resistant. Fibreboard panels made on the basis of wood fiber sheets are considered convenient to work with. The outer surface is covered with a decorative foil. MDF has become a popular material not only for making furniture, but also for decorating walls. Distinctive feature this material is heat and sound proof. Gypsum elements are considered one of the most environmentally friendly panels. They add zest to the interior, while at an affordable price. Exclusive indoor design allows cork to be created. This material combines lightness and environmental friendliness, it keeps warm well and does not transmit sounds. Only in wet rooms cork panels should not be installed.
- Installation methods. When purchasing wall panels, it is important to consider how they are attached. If the base has a perfectly flat surface, then you can use a special adhesive composition or liquid nails. Mounting hardware is considered a reliable mounting option, but often requires a lathing device.
We have selected 13 of the best wall panel manufacturers for our review. Their products are widely represented in the Russian retail network, they have received high marks from experts and positive reviews users.
Which is better tile or wall panel
|
Cladding type |
Advantages |
disadvantages |
|
Tile |
Strength and durability Resistant to moisture and temperature extremes Environmental friendliness Fire safety |
High price Complex and time-consuming installation Simple design |
|
Wall panel |
Affordable price Rich assortment of patterns and textures Simple and quick installation |
Low resistance to moisture (with rare exceptions) Limited service life Not all materials are sustainable |
Rating of the best manufacturers of wall panels
| Nomination | a place | manufacturer | rating |
| Best PVC Wall Panels | 1 | 4.9 | |
| 2 | 4.8 | ||
| 3 | 4.7 | ||
| 4 | 4.6 | ||
| 5 | 4.5 | ||
| 6 | 4.4 | ||
| 7 | 4.4 | ||
| 8 | 4.4 | ||
| The best MDF wall panels | 1 | 4.8 | |
| Best gypsum wall panels | 1 | 4.9 | |
| Best Cork Wall Panels | 1 | 4.9 | |
| The best fiberboard wall panels | 1 | 4.6 | |
| 2 | 4.5 |
Best PVC Wall Panels
PVC wall panels are widely used. Due to their moisture resistance, they can be used in all heated rooms, as well as in some buildings without heating. The experts highly appreciated the products of the following brands.
Forte
The leading European manufacturer of PVC wall panels is the Italian company Forte. Per high quality products and a wide range of experts gave the brand first place in our rating. To achieve stable quality, the company was allowed by advanced equipment, strict selection of raw materials and strict control at every stage of the production chain. Domestic consumers can choose from two collections of finishing materials, where there are about 20 different colors. In addition to wall panels, the company produces accordion doors, as well as sliding curtains for showers and bathrooms.
Users praise the quality of the wall panels, a wide range of decors, and durability. The only disadvantages are the high price.
Advantages
- high quality;
- a wide range of colors;
- durability;
- stylish design.
disadvantages
- high price.
Venta
Since 1993 has been working on the European market building materials Belgian company Venta. The brand has become a leading manufacturer of PVC wall panels. Among the company's clients are consumers not only from Europe, but also from the American continents, countries the former USSR... Since 2003, a branch of a Belgian company has been operating in the Moscow region, which is equipped with modern equipment and high-quality raw materials. Thanks to the location of the production site in our country, it was possible to find the optimal combination of price and quality.
Russian consumers praise the products for their affordable prices and beautiful appearance. The brand failed to bypass the leader of the rating due to the fragility of thin panels. Therefore, it is necessary to cut the material with extreme care.
Advantages
- affordable price;
- easy installation;
- beautiful appearance;
- color retention over time.
disadvantages
- thin panels break easily.
Deceuninck
Another Belgian concern was in the top three of our rating. The Deceuninck Group was founded in 1937, gaining the trust and loyalty of consumers from different countries... Today the company has 14 production sites, 22 warehouses and 3,600 employees. In our country, the interests of the manufacturer are represented by a division of Deceuninck Rus Ltd. The experts highly appreciated the socially responsible approach to the production of PVC products. The brand is synonymous with sustainability, energy efficiency and innovation. In 2018, the products of the concern became a laureate in the "Energy Efficiency" category at the "Innovations in Construction" exhibition.
Those consumers who have purchased the systems exterior decoration, celebrate the beauty and functionality of the finish. Users attribute the high price to the disadvantages of the product.
Advantages
- environmental friendliness;
- energy efficiency;
- beautiful appearance;
- ease of use.
disadvantages
- high price.
Vek PVC panels
The largest Russian manufacturer PVC panels is Vek LLC. The company specializes in the production of interior decoration materials. Plastic is environmentally friendly, it does not emit toxic substances. The production chain uses German, Italian and Russian films, which have been certified and have the required qualities. To give an aesthetic appearance, imitation printing is used, and the uniqueness of the interior is ensured by author's developments.
The experts praised the two-layer varnish coating panels resistant to mechanical stress. The users liked the affordable price, elegant appearance. But the fragility and persistent smell did not allow the brand to take a prize in the ranking.
Advantages
- affordable price;
- beautiful appearance;
- rich selection of colors and textures;
- ease of maintenance.
disadvantages
- significant were not found.
One of the most high-tech enterprises in the world that produces PVC panels is the Chinese company Shanghai Zhuan. In the company's catalog you can find sandwich panels, blinds, aluminum products, etc. The Russian consumer is already well aware of PVC wall and ceiling panels, as well as accessories for them. The experts were surprised by the variety of colors, the rich line of standard sizes. In this way, the manufacturer tries to meet the requirements of any client. At the same time, the model range is constantly being updated, today panels with a 3D image, with holographic paintings imitating mosaics, have appeared on the market.
Advantages
- high-tech production;
- spectacular design;
- constant renewal lineup;
- acceptable price.
disadvantages
- the smell of plastic;
- inaccurate dimensions.
Green Line
The production of plastic panels under the Green Line trademark is located in the Russian city of Kolchugino. The combination of many years of experience and modern equipment. The manufacturer uses only environmentally friendly raw materials from Europe and the USA that do not support combustion. TO strengths panels experts attribute 100% moisture resistance, good sound insulation, a wide range. With the help of UV printing technology, unique designs and logos can be applied to products.
Users praise the reliability and workmanship. There are complaints about the tonality of panels from the same series, it is not always possible to find the required dimensions.
Advantages
- environmental friendliness;
- moisture resistance;
- UV printing;
- affordable price.
disadvantages
- the tone of the panels from the same series is different;
- poor assortment of standard sizes.
Aquaton
More than 16 years of experience in the domestic construction market manufacturing company Aquaton. The company produces a wide range of PVC and fiberboard finishing materials. A plant in the Kursk region produces moisture-resistant panels, plastic products with acrylic coated, 3D effect, etc. The manufacturer managed to achieve a combination of lightness and strength due to PVC foaming technology. The presence of modern equipment allows you to accurately imitate stone, tiles or wood. To prevent the image from being washed off for many years, the surface is covered with a protective layer of waterproof varnish. Wall panels can be mounted using glue or staples (in the case of lathing).
Positive consumer reviews allowed the brand to be included in our rating.
Advantages
- rich assortment;
- ease;
- strength;
- affordable price.
disadvantages
- bad smell;
- inaccurate dimensions.
Vivaldi
The history of the Vivaldi enterprise began 30 years ago, the first production site was built in Taiwan. In 2010, products with this trademark began to be produced in Russia. Experts included the brand in our rating for the unique design of textured films, fire safety and durability. Wall panels have a Russian certificate of conformity and meet strict hygiene requirements... The advantages of the Vivaldi finishing material include moisture resistance, versatility, ease of installation, and an affordable price.
Users are satisfied with the quality of panels, stylish appearance, ease of use. The disadvantages of the brand include a modest color palette, small assortment of standard sizes, lack of additional elements on sale.
Advantages
- versatility of installation;
- moisture resistance;
- durability;
- affordable price.
disadvantages
- few colors;
- small selection of standard sizes.
The best MDF wall panels
The area of application of MDF wall panels is limited to dry warm rooms. They can help make the room warmer and quieter. The specialists liked the products of one brand the most.
Aplast
A wide range of finishing materials is produced by the production and trading company Aplast. Domestic consumers are offered products made of PVC, MDF, HDF. The experts were especially interested in MDF wall panels. Decorative sheet materials feature precise imitations of wood, brick and masonry. The manufacturer managed to achieve this effect due to embossing. There are special overlays for connecting individual panels into a single composition. Interior MDF panels will help you decorate your kitchen with style. High-gloss kitchen aprons with embossed and shimmery effect are new to the brand.
Users are satisfied with the combination of quality and affordable prices, spectacular appearance, ease of installation and operation.
Advantages
- high-quality manufacturing;
- unique decor;
- affordable price;
- ease of care.
disadvantages
- low moisture resistance.
Best gypsum wall panels
The high popularity of plasterboard finishes has made gypsum-based wall panels in demand in our country. Durability and reliability are complemented by environmental friendliness, as noted by the experts.
Artpole
Artpole 3D panels have become a new extraordinary project in the world of design. The company focused its efforts on the production of gypsum wall coverings. They attract users with seamless connection, environmental friendliness and non-flammability. Today, the consumer is offered various design options, accessories are specially developed for the order. High quality of products is ensured by strict control at every stage of production. The products were appreciated not only in our country, but also in Belarus, Kazakhstan and Ukraine. The brand is included in our rating for high-quality and stylish products, which are sold at affordable prices.
Since 1999, the Portuguese company Egen has been producing finishing materials. Cork wall panels are of particular interest to domestic consumers. But the assortment is not limited to one type of finishing materials, the company produces ceramic tiles and sanitary ware. Experts note the high level of quality that meets the requirements of international standards. Among the consumers are serious companies from Central and Eastern Europe. The brand got into our rating not only for its excellent quality, but also for a wide selection of textures and colors.
Users praise Egen cork wall panels for their warm and cozy indoor atmosphere, unique design and environmental friendliness. The disadvantages include only the high price.
Advantages
- high-quality manufacturing;
- environmental friendliness;
- unique design;
- rich assortment of textures and colors.
disadvantages
- high price.
The best fiberboard wall panels
Low cost and ease of installation attract consumers' attention to fiberboard wall panels. Sheets can be attached directly to the base or to the crate. But experts do not recommend using them for wet rooms. Here the best manufacturers in this segment.
DPI
The American DPI brand is well known all over the world. The manufacturer specializes in the production of fiberboard wall panels. The company managed to take a leading position in the domestic market due to its high consumer properties and affordable prices. The assortment includes panels with original interior solutions, which makes it possible to carry out the most daring projects of designers. Thanks to the unique technology, the consumer is offered embossed surfaces like stone, imitation of brickwork and fibrous texture of wood. Experts gave the brand the first place in our rating.
Users praise DPI wall panels for Beautiful design, high quality, practicality and reasonable price. Among the shortcomings mentioned is getting wet with prolonged contact with water.
Advantages
- original design;
- variety of textures and colors;
- practicality;
- quality workmanship.
disadvantages
- low moisture resistance.
The Skano concern sells decorative fiberboard panels under the Isotex brand on the domestic market. The manufacturer pays special attention to the safety of its products. Therefore, in the production chain, only natural raw materials are used, which are combined into one whole using Finnish technology. Soft fibreboard, which is the basis of the decorative material, plays the role of heat and sound insulator. The surface of the panels is covered with washing wallpaper, they differ in a variety of colors and textures. Bonding is carried out using a water-soluble glue.
Advantages
- environmental friendliness;
- good thermal insulation;
- ease of care;
- affordable price.
disadvantages
- fragility.
Attention! This rating is subjective, does not constitute an advertisement and does not serve as a purchase guide. Before buying, you need to consult with a specialist.
PVC plastic panels - optimal solution, if the main task is a minimum of effort and cost. They are easy to install, and the choice of colors is extremely huge. PVC panels gained popularity among users immediately after their appearance due to their versatility, practicality, aesthetics and economy.
What are PVC plastic panels
PVC plastic panels are a polymer finishing material that has gained popularity among users since its inception. The panels include lightweight, hard and durable PVC. Therefore, cladding of ceilings and walls with plastic panels is often performed in residential premises, in offices, shops and shopping centers.
A decorative pattern is applied to the outside of PVC panels using thermal printing, offset printing or lamination. The surface is covered with a protective layer of matt or glossy varnish. This treatment increases wear resistance and makes the material antistatic, UV-resistant and scratch-resistant.
In the production of plastic panels, substances harmful to humans (phenol-formaldehyde resin) are not used, which makes the coating harmless to health. For painting PVC lining, water-based paints are used.
PVC panels are available in a wide range. They are varied in texture, color and shape. A large selection allows you to use the "plastic" finish in various rooms: from the toilet or bathroom, and ending with the hall and hallway.
Advantages and disadvantages of PVC panels
The popularity of the use of the material is due to a number of advantages of PVC panels:
Negative characteristics of finishing with PVC plastic panels:
- Insufficient UV resistance - white plastic can turn yellow over time and lose its original appearance.
- Low impact resistance. Naturally, PVC panels are able to withstand minor loads, but it is possible that dents and deformations will remain. The strength of the product depends on the content of chalk in the plastic - this content is determined by the manufacturer. When counting on the purchase of durable plastic, you should pay special attention to the choice of the manufacturer.
- Specific smell. Some consumers note that at the beginning of use (for several days) an unpleasant odor persists, which eventually disappears completely.
- No matter how much manufacturers say about the complete safety of plastic, questions always remain. In terms of its environmental friendliness, plastic is in any case inferior to natural materials - wood and stone. In view of this, it is not advisable to install PVC panels in children's rooms.
Plastic PVC panels: types and characteristics
PVC panels are primarily classified depending on the purpose: ceiling or wall.
Plastic PVC panels for walls are characterized by increased strength, reduced flexibility and ability to withstand mechanical stress. The thickness of such plastic is greater than that of ceiling panels. The hardness of the material is determined by the polyvinyl chloride content. The internal stiffening ribs of PVC wall plastic panels are 1 mm thick - such plastic cannot be cut with a knife.
An important factor that determines the differences in plastic and which cannot be neglected when choosing is the size of the PVC plastic panels. Depending on the width of the panels, the following types of finishing materials are distinguished.
Plastic lining... The length of such panels is 3 m, the width is 10 cm (sometimes -12.5 cm). The lining is used for both external and interior decoration. Appearance material is something between a wooden clapboard and polycarbonate. There are two popular options:
- "Polka" - with a narrow lock connection;
- "European" - with a wide lock.
The outer PVC lining has a seam joint. This is due to the fact that plastic has a high coefficient of linear expansion. Therefore, the lining installed outside the room must "play" - move under the influence of temperature changes. An additional feature of the facade clapboard is that the color pigment is added to the raw materials at the production stage, and not painted on top. Thanks to this technology, PVC lining retains its original color for a long time.
Plastic PVC sheet panels have a large width - from 80 to 203 cm. The length of the plastic sheet reaches 105-405 cm. The most popular material is made of foamed PVC. Some manufacturers subject the surface of the sheets to a special treatment, as a result of which the sheets become stronger and more resistant to mechanical damage.
PVC sheet panels are mounted using glue and nails, and the gaps are sealed with a narrow strip or sealant to match the color of the coating.
PVC panels. Popular materials are 260, 270 and 300 cm long, and 25 cm wide. For cladding, panels with a width of 50 cm are also used. The outer side of the panel is varnished, painted or covered with thermal film. When assembled, an almost invisible seam is formed.
A separate category includes plastic PVC sandwich panel- modern finishing material with high performance characteristics... PVC panels consist of two plastic sheets. To give the material thermal insulation qualities, various fillers are used: polyurethane foam or expanded polystyrene.
Plastic sandwich panels differ in the material of the outer layer:
Fittings for plastic panels
For the installation of PVC lining, a special plastic profile for PVC panels - decorative molding. The standard profile length is 6 m. Different moldings are used for different cladding surfaces:
- initial (starting);
- universal;
- inner and outer corner;
- connective;
- cornice (ceiling plinth);
- F-shaped end.
When choosing a molding, you should pay attention to two main parameters:
- grooves - are selected taking into account the thickness of the used PVC panel; for example, for a PVC panel with a thickness of 10 mm, it is necessary to select fittings of the appropriate parameters;
- color - usually a profile of the same color as the PVC panel is taken, but for some multi-colored options you will have to buy a monochromatic molding that is close in color to the main material.
How to choose quality PVC panels
When choosing plastic panels, you can focus on the cost of the material, because quality products and they cost a lot. However, in order not to be deceived and not overpay for a low-quality product, you need to know the key points that determine the quality of plastic lining:
Plastic panel finishing technology
To complete the work, you will need some tools and materials:
- screwdriver;
- puncher;
- hacksaw;
- scissors;
- tape measure and building level;
- pencil, square;
- wooden slats for lathing or metal profiles;
- stationery knife.
Plastic finishing can be done in several ways. The choice of cladding method depends on the level of humidity in the room and on the surface.
The simplest option is frameless sheathing - vinyl panels are mounted directly to the walls or ceiling. This method can only be used in dry rooms if the substrate is relatively flat. Fasteners - special glue or liquid nails.
The adhesive mixture is applied with a notched trowel to the wall. The panels are alternately fixed with glue, joining together.
Important! With the frameless cladding method, it is impossible to mount recessed luminaires
To decorate rooms with high humidity or uneven surfaces, it is necessary to first install the crate. The wood frame is suitable for dry rooms. If a wooden crate is mounted in a room with high humidity, then it must be treated with a special moisture-proof compound.
Fix the wooden slats in a vertical position around the perimeter of the room in increments of 40 cm.Then on wooden crate with the help of small nails or a stapler, PVC panels are attached.
Installation metal frame performed in the same way as for installation drywall construction, only without transverse profiles. CD is hung across the PVC panels, and UD around the perimeter of the room. For the decoration of large rooms, it is recommended to use clamps. The lamellas are trimmed individually at the place of installation.
Docking joints are masked with a foam plinth or L-start. The fixing of the latest model is sometimes done with glue.
PVC plastic panels: photo of the interior
Decorating the kitchen with a half-wall pattern. The interior is done in black and white with the addition of red accents.
PVC plastic panels for bathroom.
Wall cladding in the living room with decorative vinyl siding.
Bright floral motives in the decoration of the walls. Hallway interior with PVC panels.
The use of plastic lining for wall and ceiling cladding on the balcony.
