Milling hair is a familiar procedure that hairdressers after haircuts. It is a thinning of hair with special scissors, thanks to which the new hairstyle looks complete and well-groomed.
But not always the thinning of strands is necessary. In the article, we will consider cases when milling looks interesting and complements the image at the same time and when it will not be completely appropriate.
Use of branch of hair
First of all, find out what effect gives milling hair. Stylists convince that this is the necessary final stage of any haircut, since it allows to achieve:
- The original type of haircut (the shredded strands fall differently, which means they will help to find a unique one who do not look like an image);
- Improving the type of haircut. Often, the milling plant is most often used to thin the cheeky, thanks to which a smooth transition to the rest of the curls is formed. The perfect contour of Chelinka is created, so even if it will grow a little, it will still be harmoniously fit into the image;
- Pads styling. After branches, the hair will look more shatter.
But to improve your appearanceYou need to perform a compound procedure correctly. A good wizard will help not only complete the haircut using high-quality branch, but will also make sure that it will look appropriate on the hair of your length.
Fill or not - what is the question
Before filing the hair, we'll figure it out, whether it is worth doing this at all. Stylists do not advise to resort to such a procedure if:
- You have thin, weakened curls that do not differ in healthy glitter;
- You made a chemical twist or stained with hydroperite strands;
- You painted the hair in red (strands after branch become ugly, patients in appearance);
- Your hair is wound. Curls can have a different length and after the branch they can stop correctly fit.
In all other cases, nothing can stop you to make Film. It should be remembered that the extended strands are suitable for almost any type of face, for hair of any length (even the owners of increasing curls), with any hairstyle and laying.
Types of branch and their features
Machining technique affects what the result will be. Two common types are distinguished: milling by tips and roots.
- At the tips.
Experts distinguish horizontal and vertical milling, thinning of the tips of the tips. With horizontal milling, the strand is fixed between the index and middle finger, after which the master cuts about 4 mm tips with special scissors. This method makes the laying more voluminous. Vertical branch implies the same method, only with the difference in the fact that the scissors slide on the surface of the ends down, which gives the roundness to strands. When filing by "cloth", the ends of the curls are pulled out and cut off at an angle of 45 degrees.
- At the roots.
This type of branch is performed crossing curls. Initially necessary manipulations were made from the roots themselves, and then in the middle of the hair. Such a thinning helped to make the hairstyle volume and thick.
You are sitting in the chair of the beauty salon for an hour and a half, the master clogs over your hair, and you enjoy enjoy in the mirror view of your updated image. And then the hairdresser asks a question affecting you as a thunder among a clear sky: "will" be cut? ". What kind of miracle is this - milling - and how does she look like? And most importantly - how will it affect your "fresh" hairstyle? Even more new hair care trends and are read
How bad is the beast? Milling or milling is an artificial thinning of your hair volume. If you heard this term from your master, this means that he asks you: Do you want to remove a little volume?
And then the choice lies with you, but keep in mind that after the reverse route will not be. This means that once withdrawing the volume from your mane once, the master will not be able to return it back, since the entire procedure is carried out with scissors and consists in point cutting out small sections from your chapels. However, it should not be assumed that during the filing you will completely deprive the volume, leaving three hair on top of the top. It is you can vary the degree of thinning and simply explain to the master what you want. Warn it that I would not like to lose a lot of volume, and an experienced professional will not cut too much. You need to know that with a backed milling mill (when the manipulation is done not with tips, but with the bases of the hair) volume is even the opposite - added. This is due to the fact that short hair becomes some kind of support and support for large strands. By the way, if you are abroad and decided to visit the beauty salon, then foreign hairdressers call mobilia by a completely different word - Tapering (Tayperin). Therefore, be alert, especially if you value each millimeter of your shock.
Not so terrible, like his little. Competent branch is practically not noticeable to look simple man and gives your hair natural view : They are very beautifully disintegrating on the strands and are wonderful. Without thinning in your haircut, all lines will be straight, obvious and rude, and the mill will give your way soft and smoothness, some femininity and refinement. Of course, this is only when you do not remove too much volume, otherwise your new hairstyle will look like you have long and hopelessly something sick, resulting in a bald. Among other things, the millilization is used in cases where the master is a little accomplished and cut off excess - such a thinning hides all visible and obvious irregularities. Most often, this happens with newcomers, but sometimes a hurry professional professionally drove his hand. From this no one is insured. Keep in mind that the hairdresser should put on the course of millionate only if you are consent. If the master you do not ask a similar question, and immediately take a milling tool in my hands, it should be a bearing for you, and then it is better to stop it and next time to sign up for another specialist. Nevertheless, in some cases, mobils are used quite actively. For example, in creative asymmetric and ripped haircuts, where each hair must be located at different levels. In addition, when creating short hairstyles (especially for southern women with very thick and thick manes), it's just not to do with the branch: it not only removes the volume, but also makes the total weight of the hair easier, militant and daily laying. We choose a tool for creating thinning, there are two auxiliary items: melting scissors and melting blade. Scissors look almost like ordinary, only on one side of them will be poured a small comb with frequent teeth. The secret of such a tool is that in each of the cloves on top there is a very small excavation: the hair fell into it is just cut off, and having failed between the teeth - remain in place. The blade is usually enclosed in plastics to protect against scaping and injury, and it also has a comfortable plastic handle. Thus, only those hair, which found on the blade, are cut off, and all others remain. Both of these types of tool for branch can be purchased in a specialized store, where the experienced seller will tell you what exactly choose. Remember that such a dangerous object should be stored in the case and use it very carefully, especially if you decide to make milling house on your own or practiced for the first time on your friend. Remember that it is not always necessary to resort to milling hair - sometimes the tips look much more beautiful, elegant and harder in their original condition. In addition, they are subject to natural millipilia under the harmful effects of cold wind and sunlight, or rather, sometimes they break without additional intervention. We hope that after reading the article you have become a bit erudite!
Milling - this is a loss of hair on a thickness, which results in a natural ratio between short and long hair. Milling is usually performed on thick hair, since the thick hair of the same length is difficult to put into the hairstyle, and laying (for example, when twigging on curle) quickly loses the form. To avoid this, hair is made to filile, i.e. It will be cut in such a way that in each strand the length of them is different.
There are three main types of branch:
- 1. The roasting, which is performed at a distance of several centimeters from hair roots. With its help, hair is lifted and become more lush, which gives hairstyle volume.
- 2. Milling on the ends of the hair, which is performed at a distance of several centimeters from the ends of the hair and also gives them a pomp. It is recommended for all short haircuts on the occipital and temporal zones so that the hair does not be filmed, but they laid naturally and smoothly.
- 3. Milling along the entire length of the straight, which is needed when solving very thick hair.
Film can be performed by special milling scissors, conventional scissors and a razor.
The depth of milling hair depends on their denotomes: what they are thick, the longer the length of the strand should be processed. For the usual branch of medium on the thickness of the hair, it is necessary to handle them at least one third of the length.
Figure 1 (straight selection)
1. Allocate a small strand of hair, combing it, holding the left hand as index and thumbs at an angle of 90 ° to the surface of the head. If you enter the scissors' blades perpendicular to strands, then it will be a lot of hair, the same in length (see Fig. 1).
As a result, individual beams cut on one level of hair will be dramatically highlighted in the hairstyle. Therefore, the scissors must be administered at an angle of 45 ° to strands. Each teeth will cut a certain hair group at different removal from the roots.
Figure 2 (work by milling scissors)
2. In the captured and combed strand of the hair, introduce the blades of mobilbin scissors and to close them. In this case, part of the hair that fell under their teeth will be cut. Then the scissors should be dismissed, move towards the ends of the hair about 1.5-2 cm and compress again. (see Fig. 2)
Figure 3 (Ride Treatment)
3. Thus, to process strand, squeezing and sprinkling scissors as they are promoted to the ends of the strands. At each stage of branches, it is necessary to separately separated from the stranded hair, combing it from the base to the ends. (See Fig. 3)
Figure 4 (roasting mill)
- 4. Direct scissors are convenient to perform roasting fibilos. It is performed by plucking: highlighted strands raise upstairs and the tips of scissors at an equal distance to plunder separate hairs. In this method, you can make bangs, hair on the temples and on the neck in the form of "fringe." (see Fig. 4)
- 5. The tips of the strands are well made to "cloth", which should be cut at a distance of 2-3 cm from the ends of the hair. This operation is also carried out by simple scissors. (see Fig. 5)
The technology of branching the razor is the same as when using a dangerous and secure razor. Starting hair treatment is needed from the lower strands. Slap to take the index and thumbs of the left hand, combing and then begin to branches. Moreover, it is necessary to remember that hair treatment is coming from the lower strands, and they must be the most short.
The first strands of the hair along the edge of their growth on the neck do not need to hardly formulate - otherwise they can get too rare. Milling temporal areas, you need to watch the strands to be very well stretched - so the cutting line of the temporal hair of the hair will become more smooth.
Figure 5 (decoration of the tips by strands "tooths")
All Hyirmanyachukham Warm greetings from Prague, where in the evenings already clearly heard the smells of autumn does not like heat, even though you are crazy! .
A few days ago I thought about the fact that I know very little about such a procedure as milling hair. Almost every time during the haircut on the question of the master, will we cut hair, I answered positively, because once a long time I was told that thick hair Necessary Fill (meant hair tips). Very often, everything that man said, who is supposedly pros of his business, you perceive as the truth in the last instance. And it would be nice if it really worked, but alas. Trust but verify .
I decided to analyze the flights due to the fact that I had a haircut in the cabin. And I decided for myself that I was in the essence of the case, and my "Yes, we do Fillin" / "No, I do not do" will be supported by certain knowledge. Under the influence of the coming writing of the diploma about NO! The post, I was conditionally divided into the theoretical part in order to familiarize yourself with the Heroine of the post by mill and practical, where I will try to briefly submit the opinion of those who passed through this procedure, supported by his own experience. Let's deal with together.
1. The essence of the procedure
Photo: hair-cosmetics.cz.
Milling - This is the procedure at which sleeping of lungs of hair. For this, hairdressers use professional milling scissors or a milling razor.
This procedure is always performed at the end of the haircut, it gives your hairstyle with the completed look and smoothness of the image, this reception is directed to the "smoothing" of small hairstyle. Can be partially or across the head. What is it, if simple words? This is the ending of a strand occurring at different height hairstyles. By the way, the filing can be applied not only to reduce the delicate, but also to increase rare hair.
There are several types of branch:
Milling tips of hair According to experts, it is necessary to give hair lightness, and haircut - smooth transitions. Sometimes this kind of branch is used when processing the check.
Photo: shpilki.net.
Baby Filivan. Use to create an amount (due to the appearance of short strands from the roots).
On the dark or top of the head of the head, the hair can not be cut briefly, otherwise it turns out the effect of the hedgehog.
Photo: 24Hair.ru.
Milling along the entire length Need to create torn, asymmetric haircuts, as well as to impart any thick hair.
Photo: Pinterest.com.
2. Milling and different types of hair
Conditionally, hair can be divided into 4 types:1 type.
Healthy, thick, sufficiently thick, with a large mass. The hair of the first type most often vitreous and shiny. This group includes redheads and black chapels.
Photo: Hair-fresh.ru.
2 type.
Brilliant, healthy. They are thinner and less than the first type. This group includes blond strands.
Photo: Hair-fresh.ru.
3 type.
Rare, rough and thin. This type of hair in most cases does not have shine. Pretty it is the chapels light shades.
Photo: Pinterest.com.
4 type.
Hair that has been treated with hydraulic or other chemical composition for curling
Photo: Volosomagia.ru.
Concerning first and second type of hair, Milling for them is not contraindicated, if you want to give the hairstyle more easier. For the first type of hair, scissors or a razor are used, for the second - special or straight scissors.
Third and fourth types hair Not worth it Fill, because the hair can be significantly powered, and thus losing in the amount.
3. Pros and cons of branch
(not my opinion, subtracted on the Internet)Cool looks more accurate, acquires "dear" species
Milling allows curls to be more lush, not weighted
Some haircuts due to their creativity require branches throughout the length
After it can start sneaking hair
Thin hair begins to look more liquid
Hair repair after poor-quality branch takes a long time
At first glance it seems that filing is a simple reception that can be performed independently. However, it should be remembered that the real master will also take into account the type of hair, and their density, and the type of hairstyles, and some other nuances known only to professionals. Therefore, that milling hair after a haircut has become the key to its beauty and attractiveness, you need to trust the execution only to a proven and experienced hairdresser.
It seems negative consequences It can be easily avoided if you comply with all the recommendations and choose good master (or stock patience and hone this art at home). But is it still radiant in reality?
4. Practical part-teaching
The non-slip digging in the network led me to the conclusion: the contented procedure of branch is much less than dissatisfied. Among the adherents Basically, those who loved the filing of Chelie and those who do not represent their lives without a short ripped haircut and are forced to constantly update it.
Opponents (Those who, with the word "milling" trembling knees, green from rage face and who is ready to cut the hands of some craftsmen of hairdresser's arts of the most melting scissors, and it is to cut the mouse, as the master cut off the unfortunate ends of their hair) more often meet among girls with long hair , regardless of the thickness of the hair.
Photo: Sigma-plus.ru.
So in what cause of failureIf everything is pretty rosy in theory? Below is a generalization based on read and viewed, including very funny explanations:
Some blame the illiteracy of the wizard, the use of poor quality tools, the incorrect technique of branches.
Wine everything is a frantic desire of hairdressers to spark all that they will get under the arm, without considering your hair type and the fact that you do not share this desire. Simply. To shred. Yes, I like it.
Inexperienced masters and experienced, which is often placed there without need to hide their flaws.
Supporters of the Conspiracy Theory believe that Millingly invented the great and resourceful minds of the beauty industry in order to contempt money from the clientele and keep it on a short leash: after the branches, the hair briefly acquire a completely decent appearance, but then the ends come into an even worst condition than it was before the haircut; The client is perplexed why the hair spoils, despite the proper care, again goes to the salon, pays, branched at the insistence of the wizard (vicious circle).
Some masters are so accustomed to making hair with every haircut that you are temporarily doing it, even when the client looks more closely to make a cut without branch. Some manage to do it with ordinary scissors, turning the experimental from the mirror. The cricks are offended by the protesting cries, arguing the perfect actions by the fact that "so it will be better" ("Thanks more thanks!"). There is no comment at all.
What do I think to this? As already mentioned, almost every my haircut was accompanied by milling ends. Did I notice the deterioration of hair quality? My hair is quite thick, but I have long wondered why they are lifeless and much thinner of the main length. Perhaps it is wines, albeit small but branches.
I still do not quite understand why thick hair need to fillWhy suddenly the straight cut of such hair without branch should look rudely. I really believe that smooth thick chic! And tactile sensations from touching it - delight! Yesterday I experienced it, finally, on myself. Now watching the hair ends will behave.
And now I really want to know your opinion:
How do you feel about Film?
If there is a similar experience, did he transformed your haircut?
Shalki owner, do you comply with her?
Thank you for paying me a little time! See you . Photos Preview: Evrikak.ru
Each woman has a structure and hair length of different. If one can be proud of thick and long hair, others are looking for effective methods Careful and rare hair care to strengthen them. But all women wish to look good, and for this, a fashionable haircut has an important meaning. Naturally, the fashionable hairstyle on the head will make you in any hairdresser, but all their services are useful for hair health, not all women know. For example, any hairdresser at the end of the haircut will ask you a question: will "be filled?". What to answer the master and what benefit from this service is to represent a few.
Film is called the thinning of her hair thickness. Used to make a haircut of an additional volume, and on too thick hair for thinning. With the help of branches, it is possible to fix (smooth) shortage of haircuts, giving smoothness and naturalness. Performed at the end of the haircut. Fill the hair can be both along the entire length and partially. \\
What are the varieties of branch
- Milling which is performed only at the ends of the hair. This species The branch gives the ease of the whole haircut. Performed for smooth transitions. Sometimes used for branch bangs.
- To create an additional volume, use roasting millilip. Created by the appearance of short-born supporting strands. Fashionable hairstyles of 2014 will not cost without branch.
- Milling which is created along the entire length of the hair. Enjoying great popularity, since it is created with torn hairstyles. It is also designed for very thick hair.
For branch, you can use simple or milling scissors, milling razors.
Milling with simple scissors 2016. What's what?
For this purpose, the base of workers was used for scissors. Scissors open, bring to strands, and begin to compress, smoothly moving them at the ends. IN this case Slip occurs, as a result of which hair cuts at different lengths. You need to be extremely careful, since heavily squeezing the scissors you can cut off the whole strand. This procedure is repeated several times before receiving the desired result. The cut that we get as a result is called slideshing. An excellent option will be a mixture of branch and color.
How to make hair filming from a to me?
Milling scissors are 2 species: one-sided and double-sided. The difference lies in the fact that the double-sided scissors are cut into a 2nd times less hair at a time. Working with double-sided scissors is a bit hard, since when the scissors are closed, the tooth goes to the prong, and one-sided tooth goes to a flat cloth. Filling the hair is not performed for all fashionable haircuts 2016.
Perform melting on pure and dry hair. Depending on the desired result, use various techniques, for example, to give the volume of the root part separate vertical strands and milling upwards. Bottom milling hair will raise the top, and so we will achieve the desired result. Film is not recommended to do if you have fatty or dry hair. Milling hair is simply necessary when performing the following haircuts: Cascade, canvas, haircut ladder on long hair, Italian, cap, as well as cesson and graduated.
Filling the roots is performed by the following method: pull strand, and cut across a few approaches: at the base of the hair, then in the middle straight, then drops down closer to the ends. Thus, we add puffy hair in the roots. With the help of milling scissors, you can perform any kind of branch.
Why make milling hair. New 2016.
There are two types of hairstyles: Kare and compound haircuts. Camped hair is a strand of different lengths. But why do you need to expose your hair with such a procedure? First of all, to give them a form. Moreover, each type of hair needs its approach.
Cutting haircuts to the face of all women. Regardless of the type of hair and their length. "However, the degree of branching hair varies depending on individual features And the desires of the client. " In any case, regardless of how strongly your hair is, this technique haircuts will help you implement a variety of hairstyles.
If you have thin hair, then the milling board should not be too noticeable. "You risk getting too thin and devoid of strands, if you make a noticeable milling hair. A good idea will be easy milling upper strands of hair for giving the hair. "
Thick hair can be subject to more thorough millilip, while you should remain in reasonable limits. "If you are stopped, then the hair volume on the head will be superfluous, as a result, you risks complicate stacking and hair care." The ideal milling allows you to evenly distribute the volume on the head and ease the mass of the hair. it's the same good decision For wavy hair, because milling will make flexible curls.
Milling video
How terrible to make movie hair? Trends in 2016.
Milling or milling is an artificial thinning of your hair volume. If you heard this term from your master, this means that he asks you: Do you want to remove a little volume? And then the choice lies with you, but keep in mind that after the reverse route will not be. This means that once withdrawing the volume from your mane once, the master will not be able to return it back, since the entire procedure is carried out with scissors and consists in point cutting out small sections from your chapels.
However, it should not be assumed that during the filing you will completely deprive the volume, leaving three hair on top of the top. It is you can vary the degree of thinning and simply explain to the master what you want. Warn it that I would not like to lose a lot of volume, and an experienced professional will not cut too much. You need to know that with a backed milling mill (when the manipulation is done not with tips, but with the bases of the hair) volume is even the opposite - added. This is due to the fact that short hair becomes some kind of support and support for large strands.
By the way, if you are abroad and decided to visit the beauty salon, then foreign hairdressers call mobilia by a completely different word - Tapering (Tayperin). Therefore, be alert, especially if you value each millimeter of your shock.
What to pay attention to the fulfillment of milling hair?
However, it is impossible to make mobilion without taking into account the thickness and obedience of hair. To correctly answer the question of the hairdresser: "will" be cut? " What method of haircut and branch can be applied to your hair.
By type, hair can be:
- Thick and thick, which have a healthy shiny look.
- Thin hair, also having a healthy look and shine.
- Thin and rare hair without brilliance, most often clarified.
- Weakened and thinned hair after chimsawing and staining.
It is necessary to form hair 1 and 2 groups, while thick and hard hair is better to cut forward with a razor or scissors, and 2 groups - only by milling scissors. Hair 3 and 4 groups should not be filled, otherwise they will become even less often. All hairstyles allowed milling of the ends of the hair - this gives hairstyle naturalness. Particularly and stylishly looks like a hairstyle with a milling ends of the reception of Pointing or Slicing. With milling hair, it is necessary to observe a sense of measure, it is impossible to rearrange.
If, after a haircut, the hair is wet, then their thinning of the milling scissors is unacceptable. The master should use a razor for this purpose. Milling scissors are used only for thinning dry or semi-dry hair. Focusing and curly hair must be especially careful. So that they become smoother and more densely left for the head to begin to fill strands from above. Methods of laying and smooting are selected depending on the size of the Kudrey and the type of hairstyle. Rigid naughty hair deep branch is contraindicated, they will not hang around in different directions.
Milling or roasting hair treatment
This type of branch is used to thin heavy thick hair - as a result, the volume is reduced hairstyle and the effect of separately lying strands is created. The hairs are cut throughout the head under the root of diagonal stripes with a width of 3-5 mm. The distance between the stripes is 1-1.5 centimeters.
Milling on the entire length of the rod. Fashionable milling 2016
Soldering hair throughout the entire length gives a haircut texturay, plasticity, facilitates the process of laying heavy thick hair. Similar hair treatment can also be applied to face correction. To achieve the goal, it is recommended to use the cutting method, slideshing or technique under exotic title "MUSH". A sliding slice gives a circle in the cross section not a circle, but a long oval, so the curls become obedient and beautifully lying.
Technique "Slossing" is used to connect zones, finalizing the finished haircut and giving it texturay, as well, when you need to emphasize the lines of the created hairstyle. With the help of the slice, it is convenient to cut the bangs - strands are rumped.
To perform slideshing, we need special, without notes, sharply sharpened scissors, and the hair should be slightly wet. The strand is delayed with the fingers of the left hand, and the semi-walled cloths of simple scissors capture it and begin to gently move from the roots of the hair to the ends in the direction of the lines of the future haircut. Close the canvas or move them should not, otherwise the strand will cut.
If the hair is short, make sure that one sheet of scissors concerned the scalp. You can only keep the weighing tool only with mill hair. With this method, you can achieve both torn and smooth effect of branch, as well as to direct the hair in the desired side. For example, to achieve the desired effect when haircut "Lestenka" in the front zone, milling is made from the inside of the strand.
Milling hair tips - 2016 trend
Milling hair tips adds a haircut of texturay, ease, softness of the contour of the strands. These are methods such as the honesting, Pointing, Point, as well as a picket.
Cutting method (hip) in milling hair
With the help of typewriter, you can adjust the volume hairstyle. The ends of the hair at the same time fall naturally. The vyching method is performed by cutting hair at different levels. Scissors are progressing to the ends of the strand, drawn by perpendicular to the head.
Pointing in 2016
"Pointing" - hair cutting with tips of simple scissors with simultaneous milling of a deep gear cut. As a result, the effect of smooth accomplication of the curls one to another is obtained. The dedicated strand is observed under the desired angle and the tips of the scissors are crashed into the hair to a depth of 0.5 - 4 cm, forming a fringe.
Scissors are located at an angle of 90 degrees to strands. At the same time, the palm is more convenient to deploy the back of the way. The operation can be performed on the fingers or above the comb. The result is a very neat hairstyle of "hairs to the hairs".
Point Point - Spacious Sing
The point slice is used when performing accurate geometric shapes. This is a haircut method with simultaneous milling. As a result of such a branch, a textured edge is obtained. Hair is cut into the tips of scissors located perpendicular to the strand. The cutting depth is 1-2 mm. This method of haircut takes a lot of time, but the curls in the finished hairstyle lie perfectly.
Pickets in 2016. How to do?
Milling with hair method "Picket" is used in short haircuts (and men's and female) for giving texture to the ends of the hair. In this case, the cutting method is applied. The hair is boded by simulating comb against growth, and strands, protruding through the slots of the tool, are filmed with the tips of the scissors - they are crashed at an angle of 45 degrees, forming teeth.
Who needs to refuse to branch
Many specialists recommend their customers to refuse to branch if they have red hair. They say that such hair can not boast of density, which will no longer allow to do the work effectively and beautiful. After the procedure is performed, the hair will seem sick and flabby. It will make hair less attractive. It is not recommended to cut high curly hair, which have different rings in height. After filing, the strands will start high and fluff out without a certain order.
It will make a hairstyle very shaggy. Even if you have perfect and luxurious hair, you should not hurry to make a babinization. If the hairdresser does not have sufficient experience and suddenly makes work wrong, then the smallest hairs will be knocked out in all directions. It will be quite difficult to fix this work. Before the restoration of the hair will have to use a special varnish.
Film receptions in 2016. Techniques in pictures and schemes
In the hairdresser's practice there were different techniques of milling hair, along which strand mills from the outside, inner side or on both sides. Cilment from the outside is more often performed in short haircuts, from the inside - long, if the hair is thick and hard - on both sides.
The method of purposeful inserts is used to provide the hair of mobility, "torn" effect, chaotic of different levels at the ends; The ends of individual thin strands are cut at different lengths (Fig. 1).
The "Tinsel" method is recommended to use at the final stage of haircuts of the entire mass of the hair or the design of the cheekeeper and the lower socket zone. The strand is delayed perpendicular to the head, the scissors are injected into the hair at an angle at smooth gaps, as a result of which the slice has a homogeneous toothed shape (Fig. 2).
The "Pointing" method is an exact haircut and filter with straight scissors toothed cut from the middle of the strands to the ends (Fig. 3 a).
The plugging method is filmed at which separate hair is cut at different heights or separate thin strands at a period of 0.5-1 cm at a length of 2-4 cm from the roots (Fig. 3 b).
The "Sliding" method, or a sliding cut method, is to milling the hair with a sliding movement along the strand (Fig. 4; 5). 
The harness method - the strand is twisted with the harness and in several places they expense the tips with scissors or a milling razor (Fig. 6).
Direct scissors are technically performed most of the milling techniques. In some of them, they work the ends of the scissors on the fingers, in others - the basis of the canvas of semi-colored scissors (Fig. 7).
Milling scissors are cut off hair that falls under the teeth of workers canned. To avoid the formation of "steps" of a rigid cut line to cut hair at different heights and provide high-quality milling, the milling scissors are placed at an angle of 45 ° to strands that are covered (Fig. 8).
Depending on the thickness of the hair, 3-5 grippers are performed for processing strands.
Milling with hazardous razors, milling knives gives equally positive results, smooth lines of the haircut.
Working a razor or mobilion knife (Fig. 9), apply:
Inner slice strands;
- External slice strands;
- Method of harness.
Strigut only moisturized hair. The strand hold out the ends large, index, middle fingers. Rates from the roots of approximately a third of the strands, carry out sliding movements from top to bottom along the strands (Fig. 10).
2015-10-05